RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Minnesota >> Otter Tail County >> Parkdale >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Minnesota

The Commemorative Quarter for Minnesota





TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to Parkdale, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Parkdale - within 30 miles [48.3 km]<1>.

Unless noted otherwise, the following communities are located in Otter Tail County.

Our list sorts the communities in alphabetical order. There are 24 communities listed:

  • Ashby
    (13 miles [20.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Ashby have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ashby
    • Ashby is located in Grant County
    • Population from the 2020 Census: 444 people
    • Jump to TripAdvisor's Tourism page for Ashby <3>
  • Battle Lake
    (14 miles [22.5 km] to the east)
  • Brandon
    (27 miles [43.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Brandon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brandon
    • Brandon is located in Douglas County
    • Population from the 2020 Census: 489 people
    • Jump to TripAdvisor's Tourism page for Brandon <3>
  • Breckenridge
    (27 miles [43.5 km] to the west)
  • Clitherall
    (18 miles [29 km] to the east)
    • Note: The GPS coordinates that we are using for Clitherall have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clitherall
    • Clitherall is located in Otter Tail County
    • Population from the 2020 Census: 106 people
    • Jump to TripAdvisor's Tourism page for Clitherall <3>
  • Dalton
    (6 miles [9.7 km] to the southeast)
  • Dent
    (26 miles [41.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Dent have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dent
    • Dent is located in Otter Tail County
    • Population from the 2020 Census: 185 people
    • Jump to TripAdvisor's Tourism page for Dent <3>
  • Elbow Lake
    (16 miles [25.7 km] to the south)
  • Elizabeth
    (11 miles [17.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Elizabeth have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elizabeth
    • Elizabeth is located in Otter Tail County
    • Population from the 2020 Census: 170 people
    • Jump to TripAdvisor's Tourism page for Elizabeth <3>
  • Erhard
    (17 miles [27.4 km] to the north)
    • Note: The GPS coordinates that we are using for Erhard have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Erhard
    • Erhard is located in Otter Tail County
    • Population from the 2020 Census: 145 people
    • Jump to TripAdvisor's Tourism page for Erhard <3>
  • Evansville
    (22 miles [35.4 km] to the southeast)
  • Fairmount
    (30 miles [48.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Fairmount have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairmount
    • Fairmount is located in Richland County (ND)
    • Population from the 2020 Census: 356 people
    • Jump to TripAdvisor's Tourism page for Fairmount <3>
  • Fergus Falls
    (4 miles [6.4 km] to the northwest)
  • Henning
    (27 miles [43.5 km] to the east)
    • Note: The GPS coordinates that we are using for Henning have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Henning
    • Henning is located in Otter Tail County
    • Population from the 2020 Census: 806 people
    • Jump to TripAdvisor's Tourism page for Henning <3>
  • Hoffman
    (29 miles [46.7 km] to the south)
  • Ottertail
    (25 miles [40.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Ottertail have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ottertail
    • Ottertail is located in Otter Tail County
    • Population from the 2020 Census: 660 people
    • Jump to TripAdvisor's Tourism page for Ottertail <3>
  • Pelican Rapids
    (23 miles [37 km] to the north)
  • Richville
    (26 miles [41.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Richville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Richville
    • Richville is located in Otter Tail County
    • Population from the 2020 Census: 98 people
    • Jump to TripAdvisor's Tourism page for Richville <3>
  • Rothsay
    (21 miles [33.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Rothsay have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rothsay
    • Rothsay is located in Otter Tail County
    • Population from the 2020 Census: 476 people
    • Jump to TripAdvisor's Tourism page for Rothsay <3>
  • Underwood
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Underwood have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Underwood
    • Underwood is located in Otter Tail County
    • Population from the 2020 Census: 364 people
    • Jump to TripAdvisor's Tourism page for Underwood <3>
  • Vergas
    (30 miles [48.3 km] to the north)
    • Note: The GPS coordinates that we are using for Vergas have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vergas
    • Vergas is located in Otter Tail County
    • Population from the 2020 Census: 354 people
    • Jump to TripAdvisor's Tourism page for Vergas <3>
  • Vining
    (22 miles [35.4 km] to the east)
  • Wahpeton
    (28 miles [45.1 km] to the west)
    • Note: The GPS coordinates that we are using for Wahpeton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wahpeton
    • Wahpeton is located in Richland County (ND)
    • Population from the 2020 Census: 7,728 people
    • Jump to TripAdvisor's Tourism page for Wahpeton <3>
  • Wendell
    (14 miles [22.5 km] to the south)

Unfortunately, we don't know of an official website for Parkdale. If you can help, please contact us through our Feedback Page.

The official website for Otter Tail County: www.co.otter-tail.mn.us/

The official website for State of Minnesota: https://mn.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Parkdale) to Point B.Our distance measurements begin at a specific point in Parkdale. The point we use is located at these GPS coordinates - Latitude: 46.2333, Longitude: -96.0128       In this case, the coordinates for Parkdale have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024