RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Minnesota >> Todd County >> Hewitt >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Minnesota

The Commemorative Quarter for Minnesota





TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to Hewitt, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Hewitt - within 29 miles [46.7 km]<1>.

Our list sorts the communities in alphabetical order. There are 24 communities listed:

  • Battle Lake
    (29 miles [46.7 km] to the west)
  • Bertha
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Bertha have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bertha
    • Bertha is located in Todd County
    • Population from the 2020 Census: 481 people
    • Jump to TripAdvisor's Tourism page for Bertha <2>
  • Carlos
    (26 miles [41.8 km] to the south)
    • Note: The GPS coordinates that we are using for Carlos have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Carlos
    • Carlos is located in Douglas County
    • Population from the 2020 Census: 490 people
    • Jump to TripAdvisor's Tourism page for Carlos <2>
  • Clarissa
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Clarissa have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clarissa
    • Clarissa is located in Todd County
    • Population from the 2020 Census: 651 people
    • Jump to TripAdvisor's Tourism page for Clarissa <2>
  • Clitherall
    (26 miles [41.8 km] to the west)
    • Note: The GPS coordinates that we are using for Clitherall have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clitherall
    • Clitherall is located in Otter Tail County
    • Population from the 2020 Census: 106 people
    • Jump to TripAdvisor's Tourism page for Clitherall <2>
  • Cushing
    (27 miles [43.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Cushing have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cushing
    • Cushing is located in Morrison County
    • Jump to TripAdvisor's Tourism page for Cushing <2>
  • Eagle Bend
    (11 miles [17.7 km] to the south)
    • Note: The GPS coordinates that we are using for Eagle Bend have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eagle Bend
    • Eagle Bend is located in Todd County
    • Population from the 2020 Census: 518 people
    • Jump to TripAdvisor's Tourism page for Eagle Bend <2>
  • Henning
    (16 miles [25.7 km] to the west)
    • Note: The GPS coordinates that we are using for Henning have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Henning
    • Henning is located in Otter Tail County
    • Population from the 2020 Census: 806 people
    • Jump to TripAdvisor's Tourism page for Henning <2>
  • Long Prairie
    (26 miles [41.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Long Prairie have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Long Prairie
    • Long Prairie is located in Todd County
    • Population from the 2020 Census: 3,297 people
    • Jump to TripAdvisor's Tourism page for Long Prairie <2>
  • Menahga
    (29 miles [46.7 km] to the north)
    • Note: The GPS coordinates that we are using for Menahga have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Menahga
    • Menahga is located in Wadena County
    • Population from the 2020 Census: 1,307 people
    • Jump to TripAdvisor's Tourism page for Menahga <2>
  • Miltona
    (21 miles [33.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Miltona have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Miltona
    • Miltona is located in Douglas County
    • Population from the 2020 Census: 425 people
    • Jump to TripAdvisor's Tourism page for Miltona <2>
  • Motley
    (21 miles [33.8 km] to the east)
    • Note: The GPS coordinates that we are using for Motley have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Motley
    • Motley is located in Morrison County
    • Population from the 2020 Census: 653 people
    • Jump to TripAdvisor's Tourism page for Motley <2>
  • New York Mills
    (19 miles [30.6 km] to the northwest)
  • Nimrod
    (23 miles [37 km] to the northeast)
  • Ottertail
    (23 miles [37 km] to the west)
    • Note: The GPS coordinates that we are using for Ottertail have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ottertail
    • Ottertail is located in Otter Tail County
    • Population from the 2020 Census: 660 people
    • Jump to TripAdvisor's Tourism page for Ottertail <2>
  • Parkers Prairie
    (16 miles [25.7 km] to the southwest)
  • Perham
    (29 miles [46.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Perham have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Perham
    • Perham is located in Otter Tail County
    • Population from the 2020 Census: 3,638 people
    • Jump to TripAdvisor's Tourism page for Perham <2>
  • Pillager
    (29 miles [46.7 km] to the east)
    • Note: The GPS coordinates that we are using for Pillager have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pillager
    • Pillager is located in Cass County
    • Population from the 2020 Census: 486 people
    • Jump to TripAdvisor's Tourism page for Pillager <2>
  • Richville
    (28 miles [45.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Richville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Richville
    • Richville is located in Otter Tail County
    • Population from the 2020 Census: 98 people
    • Jump to TripAdvisor's Tourism page for Richville <2>
  • Sebeka
    (21 miles [33.8 km] to the north)
    • Note: The GPS coordinates that we are using for Sebeka have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sebeka
    • Sebeka is located in Wadena County
    • Population from the 2020 Census: 668 people
    • Jump to TripAdvisor's Tourism page for Sebeka <2>
  • Staples
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Staples have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Staples
    • Staples is located in Todd County
    • Population from the 2020 Census: 3,068 people
    • Jump to TripAdvisor's Tourism page for Staples <2>
  • Verndale
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Verndale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Verndale
    • Verndale is located in Wadena County
    • Population from the 2020 Census: 576 people
    • Jump to TripAdvisor's Tourism page for Verndale <2>
  • Vining
    (21 miles [33.8 km] to the west)
  • Wadena
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Wadena have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wadena
    • Wadena is located in Otter Tail County
    • Population from the 2020 Census: 4,121 people
    • Jump to TripAdvisor's Tourism page for Wadena <2>

Unfortunately, we don't know of an official website for Hewitt. If you can help, please contact us through our Feedback Page.

The official website for Todd County: www.co.todd.mn.us/

The official website for State of Minnesota: https://mn.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Hewitt) to Point B.Our distance measurements begin at a specific point in Hewitt. The point we use is located at these GPS coordinates - Latitude: 46.3239, Longitude: -95.0901       In this case, the coordinates for Hewitt have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024