RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Minnesota >> Meeker County >> Cedar Mills >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Minnesota

The Commemorative Quarter for Minnesota





TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to Cedar Mills, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Cedar Mills - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 36 communities listed:

  • Annandale
    (29 miles [46.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Annandale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Annandale
    • Annandale is located in Wright County
    • Population from the 2020 Census: 3,546 people
    • Jump to TripAdvisor's Tourism page for Annandale <3>
  • Atwater
    (18 miles [29 km] to the northwest)
  • Bird Island
    (22 miles [35.4 km] to the southwest)
  • Brownton
    (16 miles [25.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Brownton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brownton
    • Brownton is located in McLeod County
    • Population from the 2020 Census: 711 people
    • Jump to TripAdvisor's Tourism page for Brownton <3>
  • Buffalo Lake
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for Buffalo Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Buffalo Lake
    • Buffalo Lake is located in Renville County
    • Population from the 2020 Census: 678 people
    • Jump to TripAdvisor's Tourism page for Buffalo Lake <3>
  • Cokato
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Cokato have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cokato
    • Cokato is located in Wright County
    • Population from the 2020 Census: 2,734 people
    • Jump to TripAdvisor's Tourism page for Cokato <3>
  • Cosmos
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Cosmos have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cosmos
    • Cosmos is located in Meeker County
    • Population from the 2020 Census: 448 people
    • Jump to TripAdvisor's Tourism page for Cosmos <3>
  • Danube
    (30 miles [48.3 km] to the west)
    • Note: The GPS coordinates that we are using for Danube have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Danube
    • Danube is located in Renville County
    • Population from the 2020 Census: 451 people
    • Jump to TripAdvisor's Tourism page for Danube <3>
  • Darwin
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Darwin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Darwin
    • Darwin is located in Meeker County
    • Population from the 2020 Census: 355 people
    • Jump to TripAdvisor's Tourism page for Darwin <3>
  • Dassel
    (13 miles [20.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Dassel have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dassel
    • Dassel is located in Meeker County
    • Population from the 2020 Census: 1,472 people
    • Jump to TripAdvisor's Tourism page for Dassel <3>
  • Eden Valley
    (25 miles [40.2 km] to the north)
    • Note: The GPS coordinates that we are using for Eden Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eden Valley
    • Eden Valley is located in Meeker County
    • Population from the 2020 Census: 1,038 people
    • Jump to TripAdvisor's Tourism page for Eden Valley <3>
  • Fairfax
    (30 miles [48.3 km] to the south)
    • Note: The GPS coordinates that we are using for Fairfax have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairfax
    • Fairfax is located in Renville County
    • Population from the 2020 Census: 1,119 people
    • Jump to TripAdvisor's Tourism page for Fairfax <3>
  • Gaylord
    (30 miles [48.3 km] to the southeast)
  • Gibbon
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Gibbon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gibbon
    • Gibbon is located in Sibley County
    • Population from the 2020 Census: 740 people
    • Jump to TripAdvisor's Tourism page for Gibbon <3>
  • Glencoe
    (21 miles [33.8 km] to the southeast)
  • Grove City
    (16 miles [25.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Grove City have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grove City
    • Grove City is located in Meeker County
    • Population from the 2020 Census: 624 people
    • Jump to TripAdvisor's Tourism page for Grove City <3>
  • Hector
    (17 miles [27.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Hector have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hector
    • Hector is located in Renville County
    • Population from the 2020 Census: 1,041 people
    • Jump to TripAdvisor's Tourism page for Hector <3>
  • Howard Lake
    (23 miles [37 km] to the east)
  • Hutchinson
    (8 miles [12.9 km] to the southeast)
  • Kimball
    (27 miles [43.5 km] to the north)
    • Note: The GPS coordinates that we are using for Kimball have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kimball
    • Kimball is located in Stearns County
    • Population from the 2020 Census: 802 people
    • Jump to TripAdvisor's Tourism page for Kimball <3>
  • Lake Lillian
    (17 miles [27.4 km] to the west)
    • Note: The GPS coordinates that we are using for Lake Lillian have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Lillian
    • Lake Lillian is located in Kandiyohi County
    • Population from the 2020 Census: 233 people
    • Jump to TripAdvisor's Tourism page for Lake Lillian <3>
  • Lester Prairie
    (23 miles [37 km] to the east)
    • Note: The GPS coordinates that we are using for Lester Prairie have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lester Prairie
    • Lester Prairie is located in McLeod County
    • Population from the 2020 Census: 1,724 people
    • Jump to TripAdvisor's Tourism page for Lester Prairie <3>
  • Litchfield
    (12 miles [19.3 km] to the north)
  • Montrose
    (30 miles [48.3 km] to the east)
  • New Auburn
    (23 miles [37 km] to the southeast)
    • Note: The GPS coordinates that we are using for New Auburn have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Auburn
    • New Auburn is located in Sibley County
    • Population from the 2020 Census: 427 people
    • Jump to TripAdvisor's Tourism page for New Auburn <3>
  • New Germany
    (27 miles [43.5 km] to the east)
    • Note: The GPS coordinates that we are using for New Germany have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Germany
    • New Germany is located in Carver County
    • Population from the 2020 Census: 422 people
    • Jump to TripAdvisor's Tourism page for New Germany <3>
  • Olivia
    (25 miles [40.2 km] to the southwest)
  • Plato
    (26 miles [41.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Plato have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Plato
    • Plato is located in McLeod County
    • Population from the 2020 Census: 303 people
    • Jump to TripAdvisor's Tourism page for Plato <3>
  • Silver Lake
    (16 miles [25.7 km] to the east)
    • Note: The GPS coordinates that we are using for Silver Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Silver Lake
    • Silver Lake is located in McLeod County
    • Population from the 2020 Census: 806 people
    • Jump to TripAdvisor's Tourism page for Silver Lake <3>
  • South Haven
    (28 miles [45.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for South Haven have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Haven
    • South Haven is located in Wright County
    • Population from the 2020 Census: 189 people
    • Jump to TripAdvisor's Tourism page for South Haven <3>
  • Spicer
    (28 miles [45.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Spicer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spicer
    • Spicer is located in Kandiyohi County
    • Population from the 2020 Census: 1,224 people
    • Jump to TripAdvisor's Tourism page for Spicer <3>
  • Watkins
    (26 miles [41.8 km] to the north)
    • Note: The GPS coordinates that we are using for Watkins have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Watkins
    • Watkins is located in Meeker County
    • Population from the 2020 Census: 958 people
    • Jump to TripAdvisor's Tourism page for Watkins <3>
  • Waverly
    (28 miles [45.1 km] to the east)
  • Willmar
    (27 miles [43.5 km] to the northwest)
  • Winsted
    (22 miles [35.4 km] to the east)
    • Note: The GPS coordinates that we are using for Winsted have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winsted
    • Winsted is located in McLeod County
    • Population from the 2020 Census: 2,230 people
    • Jump to TripAdvisor's Tourism page for Winsted <3>
  • Winthrop
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Winthrop have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winthrop
    • Winthrop is located in Sibley County
    • Population from the 2020 Census: 1,323 people
    • Jump to TripAdvisor's Tourism page for Winthrop <3>

Unfortunately, we don't know of an official website for Cedar Mills. If you can help, please contact us through our Feedback Page.

The official website for Meeker County: www.co.meeker.mn.us/

The official website for State of Minnesota: https://mn.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Cedar Mills) to Point B.Our distance measurements begin at a specific point in Cedar Mills. The point we use is located at these GPS coordinates - Latitude: 44.9465, Longitude: -94.5199       In this case, the coordinates for Cedar Mills have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024