RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maine >> Knox County >> Pitmans Corner >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Maine

The Commemorative Quarter for Maine





TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to Pitmans Corner, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Pitmans Corner - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 85 communities listed:

  • Albion
    (18 miles [29 km] to the northwest)
  • Alna
    (22 miles [35.4 km] to the southwest)
    • Jump to our Gazetteer entry for Alna
    • Alna is located in Lincoln County
    • Population from the 2020 Census: 763 people
    • Jump to TripAdvisor's Tourism page for Alna <2>
  • Appleton
    (Less than 2 miles to the south)
  • Augusta
    (26 miles [41.8 km] to the west)
  • Belfast
    (14 miles [22.5 km] to the northeast)
  • Belgrade
    (30 miles [48.3 km] to the west)
    • Note: The GPS coordinates that we are using for Belgrade have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Belgrade
    • Belgrade is located in Kennebec County
    • Population from the 2020 Census: 3,150 people
    • Jump to TripAdvisor's Tourism page for Belgrade <2>
  • Bremen
    (23 miles [37 km] to the southwest)
    • Note: The GPS coordinates that we are using for Bremen have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bremen
    • Bremen is located in Lincoln County
    • Population from the 2020 Census: 814 people
    • Jump to TripAdvisor's Tourism page for Bremen <2>
  • Bristol
    (27 miles [43.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Bristol have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bristol
    • Bristol is located in Lincoln County
    • Population from the 2020 Census: 2,796 people
    • Jump to TripAdvisor's Tourism page for Bristol <2>
  • Brooks
    (17 miles [27.4 km] to the north)
  • Brooksville
    (27 miles [43.5 km] to the east)
    • Note: The GPS coordinates that we are using for Brooksville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brooksville
    • Brooksville is located in Hancock County
    • Population from the 2020 Census: 910 people
    • Jump to TripAdvisor's Tourism page for Brooksville <2>
  • Bucksport
    (28 miles [45.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bucksport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bucksport
    • Bucksport is located in Hancock County
    • Population from the 2020 Census: 4,916 people
    • Jump to TripAdvisor's Tourism page for Bucksport <2>
  • Camden
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Camden have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Camden
    • Camden is located in Knox County
    • Population from the 2020 Census: 4,806 people
    • Jump to TripAdvisor's Tourism page for Camden <2>
  • Castine
    (22 miles [35.4 km] to the east)
  • Chamberlain
    (30 miles [48.3 km] to the south)
  • Chelsea
    (23 miles [37 km] to the west)
    • Note: The GPS coordinates that we are using for Chelsea have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chelsea
    • Chelsea is located in Kennebec County
    • Population from the 2020 Census: 2,753 people
    • Jump to TripAdvisor's Tourism page for Chelsea <2>
  • China
    (17 miles [27.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for China have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for China
    • China is located in Kennebec County
    • Population from the 2020 Census: 4,339 people
    • Jump to TripAdvisor's Tourism page for China <2>
  • Clinton
    (26 miles [41.8 km] to the northwest)
  • Coopers Mills
    (15 miles [24.1 km] to the west)
    • Note: The GPS coordinates that we are using for Coopers Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Coopers Mills
    • Coopers Mills is located in Lincoln County
    • Jump to TripAdvisor's Tourism page for Coopers Mills <2>
  • Cushing
    (19 miles [30.6 km] to the south)
    • Note: The GPS coordinates that we are using for Cushing have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cushing
    • Cushing is located in Knox County
    • Population from the 2020 Census: 1,500 people
    • Jump to TripAdvisor's Tourism page for Cushing <2>
  • Damariscotta
    (23 miles [37 km] to the southwest)
  • Deer Isle
    (28 miles [45.1 km] to the east)
    • Note: The GPS coordinates that we are using for Deer Isle have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Deer Isle
    • Deer Isle is located in Hancock County
    • Population from the 2020 Census: 1,911 people
    • Jump to TripAdvisor's Tourism page for Deer Isle <2>
  • Dresden
    (27 miles [43.5 km] to the southwest)
  • Edgecomb
    (30 miles [48.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Edgecomb have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Edgecomb
    • Edgecomb is located in Lincoln County
    • Population from the 2020 Census: 1,265 people
    • Jump to TripAdvisor's Tourism page for Edgecomb <2>
  • Fairfield
    (26 miles [41.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairfield
    • Fairfield is located in Somerset County
    • Population from the 2020 Census: 6,552 people
    • Jump to TripAdvisor's Tourism page for Fairfield <2>
  • Farmingdale
    (26 miles [41.8 km] to the west)
    • Note: The GPS coordinates that we are using for Farmingdale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Farmingdale
    • Farmingdale is located in Kennebec County
    • Population from the 2020 Census: 2,925 people
    • Jump to TripAdvisor's Tourism page for Farmingdale <2>
  • Frankfort
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Frankfort have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Frankfort
    • Frankfort is located in Waldo County
    • Population from the 2020 Census: 1,196 people
    • Jump to TripAdvisor's Tourism page for Frankfort <2>
  • Freedom
    (15 miles [24.1 km] to the north)
    • Note: The GPS coordinates that we are using for Freedom have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Freedom
    • Freedom is located in Waldo County
    • Population from the 2020 Census: 732 people
    • Jump to TripAdvisor's Tourism page for Freedom <2>
  • Friendship
    (22 miles [35.4 km] to the south)
    • Note: The GPS coordinates that we are using for Friendship have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Friendship
    • Friendship is located in Knox County
    • Population from the 2020 Census: 1,143 people
    • Jump to TripAdvisor's Tourism page for Friendship <2>
  • Gardiner
    (26 miles [41.8 km] to the west)
  • Hallowell
    (27 miles [43.5 km] to the west)
  • Harborside
    (21 miles [33.8 km] to the east)
    • Note: The GPS coordinates that we are using for Harborside have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harborside
    • Harborside is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Harborside <2>
  • Hope
    (5 miles [8 km] to the southeast)
  • Jefferson
    (12 miles [19.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Jefferson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jefferson
    • Jefferson is located in Lincoln County
    • Population from the 2020 Census: 2,470 people
    • Jump to TripAdvisor's Tourism page for Jefferson <2>
  • Liberty
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Liberty
    • Liberty is located in Waldo County
    • Population from the 2020 Census: 977 people
    • Jump to TripAdvisor's Tourism page for Liberty <2>
  • Lincolnville Center
    (6 miles [9.7 km] to the east)
  • Lincolnville
    (11 miles [17.7 km] to the east)
    • Note: The GPS coordinates that we are using for Lincolnville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lincolnville
    • Lincolnville is located in Waldo County
    • Population from the 2020 Census: 2,252 people
    • Jump to TripAdvisor's Tourism page for Lincolnville <2>
  • Little Deer Isle
    (27 miles [43.5 km] to the east)
  • Manchester
    (30 miles [48.3 km] to the west)
    • Note: The GPS coordinates that we are using for Manchester have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Manchester
    • Manchester is located in Kennebec County
    • Population from the 2020 Census: 2,555 people
    • Jump to TripAdvisor's Tourism page for Manchester <2>
  • Morrill
    (10 miles [16.1 km] to the northeast)
  • Newcastle
    (23 miles [37 km] to the southwest)
  • Nobleboro
    (19 miles [30.6 km] to the southwest)
  • North Edgecomb
    (29 miles [46.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for North Edgecomb have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for North Edgecomb
    • North Edgecomb is located in Lincoln County
    • Jump to TripAdvisor's Tourism page for North Edgecomb <2>
  • North Haven
    (22 miles [35.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for North Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for North Haven
    • North Haven is located in Knox County
    • Population from the 2020 Census: 358 people
    • Jump to TripAdvisor's Tourism page for North Haven <2>
  • Northport
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Northport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Northport
    • Northport is located in Waldo County
    • Population from the 2020 Census: 1,593 people
    • Jump to TripAdvisor's Tourism page for Northport <2>
  • Oakland
    (28 miles [45.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Oakland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oakland
    • Oakland is located in Kennebec County
    • Population from the 2020 Census: 6,341 people
    • Jump to TripAdvisor's Tourism page for Oakland <2>
  • Orland
    (30 miles [48.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Orland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Orland
    • Orland is located in Hancock County
    • Population from the 2020 Census: 2,173 people
    • Jump to TripAdvisor's Tourism page for Orland <2>
  • Owls Head
    (18 miles [29 km] to the southeast)
  • Palermo
    (13 miles [20.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Palermo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Palermo
    • Palermo is located in Waldo County
    • Population from the 2020 Census: 1,525 people
    • Jump to TripAdvisor's Tourism page for Palermo <2>
  • Pemaquid
    (30 miles [48.3 km] to the southwest)
  • Penobscot
    (22 miles [35.4 km] to the east)
    • Note: The GPS coordinates that we are using for Penobscot have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Penobscot
    • Penobscot is located in Hancock County
    • Population from the 2020 Census: 1,220 people
    • Jump to TripAdvisor's Tourism page for Penobscot <2>
  • Port Clyde
    (26 miles [41.8 km] to the south)
    • Note: The GPS coordinates that we are using for Port Clyde have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Port Clyde
    • Port Clyde is located in Knox County
    • Jump to TripAdvisor's Tourism page for Port Clyde <2>
  • Prospect
    (25 miles [40.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Prospect have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Prospect
    • Prospect is located in Waldo County
    • Population from the 2020 Census: 750 people
    • Jump to TripAdvisor's Tourism page for Prospect <2>
  • Randolph
    (26 miles [41.8 km] to the west)
    • Note: The GPS coordinates that we are using for Randolph have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Randolph
    • Randolph is located in Kennebec County
    • Population from the 2020 Census: 1,710 people
    • Jump to TripAdvisor's Tourism page for Randolph <2>
  • Rockland
    (15 miles [24.1 km] to the southeast)
  • Rockport
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Rockport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rockport
    • Rockport is located in Knox County
    • Population from the 2020 Census: 3,389 people
    • Jump to TripAdvisor's Tourism page for Rockport <2>
  • Round Pond
    (27 miles [43.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Round Pond have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Round Pond
    • Round Pond is located in Lincoln County
    • Jump to TripAdvisor's Tourism page for Round Pond <2>
  • Sandy Point
    (25 miles [40.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Sandy Point have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sandy Point
    • Sandy Point is located in Waldo County
    • Jump to TripAdvisor's Tourism page for Sandy Point <2>
  • Searsmont
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Searsmont have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Searsmont
    • Searsmont is located in Waldo County
    • Population from the 2020 Census: 1,424 people
    • Jump to TripAdvisor's Tourism page for Searsmont <2>
  • Searsport
    (18 miles [29 km] to the northeast)
  • South China
    (17 miles [27.4 km] to the west)
    • Note: The GPS coordinates that we are using for South China have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South China
    • South China is located in Kennebec County
    • Jump to TripAdvisor's Tourism page for South China <2>
  • South Thomaston
    (18 miles [29 km] to the south)
    • Note: The GPS coordinates that we are using for South Thomaston have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Thomaston
    • South Thomaston is located in Knox County
    • Population from the 2020 Census: 1,642 people
    • Jump to TripAdvisor's Tourism page for South Thomaston <2>
  • Spruce Head
    (21 miles [33.8 km] to the south)
    • Note: The GPS coordinates that we are using for Spruce Head have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spruce Head
    • Spruce Head is located in Knox County
    • Jump to TripAdvisor's Tourism page for Spruce Head <2>
  • Stockton Springs
    (22 miles [35.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Stockton Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stockton Springs
    • Stockton Springs is located in Waldo County
    • Population from the 2020 Census: 1,640 people
    • Jump to TripAdvisor's Tourism page for Stockton Springs <2>
  • Stonington
    (30 miles [48.3 km] to the east)
    • Note: The GPS coordinates that we are using for Stonington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stonington
    • Stonington is located in Hancock County
    • Population from the 2020 Census: 1,033 people
    • Jump to TripAdvisor's Tourism page for Stonington <2>
  • Sunset
    (27 miles [43.5 km] to the east)
    • Note: The GPS coordinates that we are using for Sunset have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sunset
    • Sunset is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Sunset <2>
  • Swanville
    (19 miles [30.6 km] to the northeast)
    • Note: The GPS coordinates that we are using for Swanville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Swanville
    • Swanville is located in Waldo County
    • Population from the 2020 Census: 1,359 people
    • Jump to TripAdvisor's Tourism page for Swanville <2>
  • Tenants Harbor
    (23 miles [37 km] to the south)
  • Thomaston
    (16 miles [25.7 km] to the south)
  • Thorndike
    (18 miles [29 km] to the north)
    • Note: The GPS coordinates that we are using for Thorndike have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thorndike
    • Thorndike is located in Waldo County
    • Population from the 2020 Census: 897 people
    • Jump to TripAdvisor's Tourism page for Thorndike <2>
  • Troy
    (24 miles [38.6 km] to the north)
    • Note: The GPS coordinates that we are using for Troy have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Troy
    • Troy is located in Waldo County
    • Population from the 2020 Census: 1,053 people
    • Jump to TripAdvisor's Tourism page for Troy <2>
  • Union
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Union have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Union
    • Union is located in Knox County
    • Population from the 2020 Census: 2,275 people
    • Jump to TripAdvisor's Tourism page for Union <2>
  • Unity
    (21 miles [33.8 km] to the north)
    • Note: The GPS coordinates that we are using for Unity have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Unity
    • Unity is located in Waldo County
    • Population from the 2020 Census: 2,111 people
    • Jump to TripAdvisor's Tourism page for Unity <2>
  • Vassalboro
    (23 miles [37 km] to the northwest)
    • Note: The GPS coordinates that we are using for Vassalboro have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vassalboro
    • Vassalboro is located in Kennebec County
    • Population from the 2020 Census: 4,420 people
    • Jump to TripAdvisor's Tourism page for Vassalboro <2>
  • Vinalhaven
    (27 miles [43.5 km] to the southeast)
  • Waldoboro
    (16 miles [25.7 km] to the southwest)
  • Walpole
    (28 miles [45.1 km] to the southwest)
  • Warren
    (12 miles [19.3 km] to the south)
  • Washington
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Washington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Washington
    • Washington is located in Knox County
    • Population from the 2020 Census: 1,520 people
    • Jump to TripAdvisor's Tourism page for Washington <2>
  • Waterville
    (25 miles [40.2 km] to the northwest)
  • West Rockport
    (10 miles [16.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for West Rockport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Rockport
    • West Rockport is located in Knox County
    • Jump to TripAdvisor's Tourism page for West Rockport <2>
  • Whitefield
    (21 miles [33.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Whitefield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Whitefield
    • Whitefield is located in Lincoln County
    • Population from the 2020 Census: 2,281 people
    • Jump to TripAdvisor's Tourism page for Whitefield <2>
  • Windsor
    (16 miles [25.7 km] to the west)
    • Note: The GPS coordinates that we are using for Windsor have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Windsor
    • Windsor is located in Kennebec County
    • Population from the 2020 Census: 2,620 people
    • Jump to TripAdvisor's Tourism page for Windsor <2>
  • Winslow
    (24 miles [38.6 km] to the northwest)
    • Note: The GPS coordinates that we are using for Winslow have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winslow
    • Winslow is located in Kennebec County
    • Population from the 2020 Census: 7,654 people
    • Jump to TripAdvisor's Tourism page for Winslow <2>
  • Winterport
    (30 miles [48.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Winterport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winterport
    • Winterport is located in Waldo County
    • Population from the 2020 Census: 4,028 people
    • Jump to TripAdvisor's Tourism page for Winterport <2>
  • Wiscasset
    (29 miles [46.7 km] to the southwest)

Unfortunately, we don't know of an official website for Pitmans Corner. If you can help, please contact us through our Feedback Page.

The official website for Knox County: www.knoxcounty.midcoast.com/

The official website for State of Maine: https://www.maine.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Pitmans Corner) to Point B.Our distance measurements begin at a specific point in Pitmans Corner. The point we use is located at these GPS coordinates - Latitude: 44.3076, Longitude: -69.2437       In this case, the coordinates for Pitmans Corner have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024