RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maine >> Hancock County >> Hurds Corner >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Maine

The Commemorative Quarter for Maine





TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to Hurds Corner, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Hurds Corner - within 30 miles [48.3 km]<1>.

Unless noted otherwise, the following communities are located in Hancock County.

Our list sorts the communities in alphabetical order. There are 71 communities listed:

  • Alton
    (30 miles [48.3 km] to the north)
    • Note: The GPS coordinates that we are using for Alton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Alton
    • Alton is located in Penobscot County
    • Population from the 2020 Census: 858 people
    • Jump to TripAdvisor's Tourism page for Alton <3>
  • Aurora
    (19 miles [30.6 km] to the northeast)
    • Note: The GPS coordinates that we are using for Aurora have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Aurora
    • Aurora is located in Hancock County
    • Population from the 2020 Census: 112 people
    • Jump to TripAdvisor's Tourism page for Aurora <3>
  • Bangor
    (17 miles [27.4 km] to the northwest)
    • Jump to our Gazetteer entry for Bangor
    • Bangor is located in Penobscot County
    • Population from the 2020 Census: 31,998 people
    • Jump to TripAdvisor's Tourism page for Bangor <3>
  • Bar Harbor
    (22 miles [35.4 km] to the southeast)
  • Bass Harbor
    (27 miles [43.5 km] to the south)
    • Note: The GPS coordinates that we are using for Bass Harbor have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bass Harbor
    • Bass Harbor is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Bass Harbor <3>
  • Beddington
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Beddington have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Beddington
    • Beddington is located in Washington County
    • Population from the 2020 Census: 48 people
    • Jump to TripAdvisor's Tourism page for Beddington <3>
  • Belfast
    (27 miles [43.5 km] to the southwest)
  • Bernard
    (27 miles [43.5 km] to the south)
  • Birch Harbor
    (28 miles [45.1 km] to the southeast)
  • Blue Hill
    (14 miles [22.5 km] to the south)
  • Bradley
    (21 miles [33.8 km] to the north)
  • Brewer
    (15 miles [24.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Brewer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brewer
    • Brewer is located in Penobscot County
    • Population from the 2020 Census: 8,948 people
    • Jump to TripAdvisor's Tourism page for Brewer <3>
  • Brooklin
    (24 miles [38.6 km] to the south)
  • Brooks
    (29 miles [46.7 km] to the west)
  • Brooksville
    (20 miles [32.2 km] to the south)
    • Note: The GPS coordinates that we are using for Brooksville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brooksville
    • Brooksville is located in Hancock County
    • Population from the 2020 Census: 910 people
    • Jump to TripAdvisor's Tourism page for Brooksville <3>
  • Bucksport
    (13 miles [20.9 km] to the west)
    • Note: The GPS coordinates that we are using for Bucksport have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bucksport
    • Bucksport is located in Hancock County
    • Population from the 2020 Census: 4,916 people
    • Jump to TripAdvisor's Tourism page for Bucksport <3>
  • Carmel
    (28 miles [45.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Carmel have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Carmel
    • Carmel is located in Penobscot County
    • Population from the 2020 Census: 2,857 people
    • Jump to TripAdvisor's Tourism page for Carmel <3>
  • Castine
    (20 miles [32.2 km] to the southwest)
  • Cherryfield
    (29 miles [46.7 km] to the east)
    • Note: The GPS coordinates that we are using for Cherryfield have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cherryfield
    • Cherryfield is located in Washington County
    • Population from the 2020 Census: 1,167 people
    • Jump to TripAdvisor's Tourism page for Cherryfield <3>
  • Corea
    (30 miles [48.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Corea have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Corea
    • Corea is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Corea <3>
  • Dedham
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Dedham have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dedham
    • Dedham is located in Hancock County
    • Population from the 2020 Census: 1,666 people
    • Jump to TripAdvisor's Tourism page for Dedham <3>
  • Deer Isle
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Deer Isle have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Deer Isle
    • Deer Isle is located in Hancock County
    • Population from the 2020 Census: 1,911 people
    • Jump to TripAdvisor's Tourism page for Deer Isle <3>
  • East Blue Hill
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for East Blue Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Blue Hill
    • East Blue Hill is located in Hancock County
    • Jump to TripAdvisor's Tourism page for East Blue Hill <3>
  • East Orland
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for East Orland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Orland
    • East Orland is located in Hancock County
    • Jump to TripAdvisor's Tourism page for East Orland <3>
  • East Sullivan
    (19 miles [30.6 km] to the east)
    • Note: The GPS coordinates that we are using for East Sullivan have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Sullivan
    • East Sullivan is located in Hancock County
    • Jump to TripAdvisor's Tourism page for East Sullivan <3>
  • Eastbrook
    (13 miles [20.9 km] to the east)
    • Note: The GPS coordinates that we are using for Eastbrook have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eastbrook
    • Eastbrook is located in Hancock County
    • Population from the 2020 Census: 416 people
    • Jump to TripAdvisor's Tourism page for Eastbrook <3>
  • Eddington
    (16 miles [25.7 km] to the northwest)
  • Ellsworth
    (7 miles [11.3 km] to the southeast)
  • Frankfort
    (17 miles [27.4 km] to the west)
    • Note: The GPS coordinates that we are using for Frankfort have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Frankfort
    • Frankfort is located in Waldo County
    • Population from the 2020 Census: 1,196 people
    • Jump to TripAdvisor's Tourism page for Frankfort <3>
  • Franklin
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Franklin
    • Franklin is located in Hancock County
    • Population from the 2020 Census: 1,567 people
    • Jump to TripAdvisor's Tourism page for Franklin <3>
  • Gouldsboro
    (25 miles [40.2 km] to the east)
    • Note: The GPS coordinates that we are using for Gouldsboro have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gouldsboro
    • Gouldsboro is located in Hancock County
    • Population from the 2020 Census: 1,743 people
    • Jump to TripAdvisor's Tourism page for Gouldsboro <3>
  • Hampden
    (17 miles [27.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Hampden have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hampden
    • Hampden is located in Penobscot County
    • Population from the 2020 Census: 7,513 people
    • Jump to TripAdvisor's Tourism page for Hampden <3>
  • Hancock
    (14 miles [22.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Hancock have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hancock
    • Hancock is located in Hancock County
    • Population from the 2020 Census: 2,440 people
    • Jump to TripAdvisor's Tourism page for Hancock <3>
  • Harborside
    (23 miles [37 km] to the southwest)
    • Note: The GPS coordinates that we are using for Harborside have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harborside
    • Harborside is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Harborside <3>
  • Hermon
    (23 miles [37 km] to the northwest)
    • Note: The GPS coordinates that we are using for Hermon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hermon
    • Hermon is located in Penobscot County
    • Population from the 2020 Census: 6,104 people
    • Jump to TripAdvisor's Tourism page for Hermon <3>
  • Holden
    (12 miles [19.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Holden have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Holden
    • Holden is located in Penobscot County
    • Population from the 2020 Census: 3,120 people
    • Jump to TripAdvisor's Tourism page for Holden <3>
  • Hulls Cove
    (19 miles [30.6 km] to the southeast)
  • Kenduskeag
    (28 miles [45.1 km] to the northwest)
  • Lamoine
    (13 miles [20.9 km] to the southeast)
  • Levant
    (26 miles [41.8 km] to the northwest)
    • Jump to our Gazetteer entry for Levant
    • Levant is located in Penobscot County
    • Population from the 2020 Census: 2,983 people
    • Jump to TripAdvisor's Tourism page for Levant <3>
  • Little Deer Isle
    (24 miles [38.6 km] to the south)
  • Milford
    (23 miles [37 km] to the north)
    • Note: The GPS coordinates that we are using for Milford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Milford
    • Milford is located in Penobscot County
    • Population from the 2020 Census: 2,973 people
    • Jump to TripAdvisor's Tourism page for Milford <3>
  • Mount Desert
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Mount Desert have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Desert
    • Mount Desert is located in Hancock County
    • Population from the 2020 Census: 2,114 people
    • Jump to TripAdvisor's Tourism page for Mount Desert <3>
  • Northeast Harbor
    (25 miles [40.2 km] to the southeast)
  • Northport
    (28 miles [45.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Northport have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Northport
    • Northport is located in Waldo County
    • Population from the 2020 Census: 1,593 people
    • Jump to TripAdvisor's Tourism page for Northport <3>
  • Old Town
    (22 miles [35.4 km] to the north)
    • Note: The GPS coordinates that we are using for Old Town have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Old Town
    • Old Town is located in Penobscot County
    • Population from the 2020 Census: 7,404 people
    • Jump to TripAdvisor's Tourism page for Old Town <3>
  • Orland
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Orland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Orland
    • Orland is located in Hancock County
    • Population from the 2020 Census: 2,173 people
    • Jump to TripAdvisor's Tourism page for Orland <3>
  • Orono
    (19 miles [30.6 km] to the north)
    • Note: The GPS coordinates that we are using for Orono have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Orono
    • Orono is located in Penobscot County
    • Population from the 2020 Census: 10,636 people
    • Jump to TripAdvisor's Tourism page for Orono <3>
  • Orrington
    (16 miles [25.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Orrington have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Orrington
    • Orrington is located in Penobscot County
    • Population from the 2020 Census: 3,668 people
    • Jump to TripAdvisor's Tourism page for Orrington <3>
  • Otter Creek
    (25 miles [40.2 km] to the southeast)
  • Penobscot
    (20 miles [32.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Penobscot have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Penobscot
    • Penobscot is located in Hancock County
    • Population from the 2020 Census: 1,220 people
    • Jump to TripAdvisor's Tourism page for Penobscot <3>
  • Prospect Harbor
    (28 miles [45.1 km] to the southeast)
  • Prospect
    (17 miles [27.4 km] to the west)
    • Note: The GPS coordinates that we are using for Prospect have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Prospect
    • Prospect is located in Waldo County
    • Population from the 2020 Census: 750 people
    • Jump to TripAdvisor's Tourism page for Prospect <3>
  • Sandy Point
    (15 miles [24.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Sandy Point have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sandy Point
    • Sandy Point is located in Waldo County
    • Jump to TripAdvisor's Tourism page for Sandy Point <3>
  • Seal Cove
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Seal Cove have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Seal Cove
    • Seal Cove is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Seal Cove <3>
  • Seal Harbor
    (25 miles [40.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Seal Harbor have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Seal Harbor
    • Seal Harbor is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Seal Harbor <3>
  • Searsport
    (22 miles [35.4 km] to the southwest)
  • Sedgwick
    (21 miles [33.8 km] to the south)
    • Note: The GPS coordinates that we are using for Sedgwick have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sedgwick
    • Sedgwick is located in Hancock County
    • Population from the 2020 Census: 1,175 people
    • Jump to TripAdvisor's Tourism page for Sedgwick <3>
  • Sorrento
    (19 miles [30.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Sorrento have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sorrento
    • Sorrento is located in Hancock County
    • Population from the 2020 Census: 267 people
    • Jump to TripAdvisor's Tourism page for Sorrento <3>
  • Southwest Harbor
    (25 miles [40.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Southwest Harbor have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Southwest Harbor
    • Southwest Harbor is located in Hancock County
    • Population from the 2020 Census: 1,793 people
    • Jump to TripAdvisor's Tourism page for Southwest Harbor <3>
  • Steuben
    (28 miles [45.1 km] to the east)
    • Note: The GPS coordinates that we are using for Steuben have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Steuben
    • Steuben is located in Washington County
    • Population from the 2020 Census: 1,148 people
    • Jump to TripAdvisor's Tourism page for Steuben <3>
  • Stockton Springs
    (18 miles [29 km] to the southwest)
    • Note: The GPS coordinates that we are using for Stockton Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stockton Springs
    • Stockton Springs is located in Waldo County
    • Population from the 2020 Census: 1,640 people
    • Jump to TripAdvisor's Tourism page for Stockton Springs <3>
  • Sullivan
    (17 miles [27.4 km] to the east)
    • Note: The GPS coordinates that we are using for Sullivan have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sullivan
    • Sullivan is located in Hancock County
    • Population from the 2020 Census: 1,261 people
    • Jump to TripAdvisor's Tourism page for Sullivan <3>
  • Sunset
    (29 miles [46.7 km] to the south)
    • Note: The GPS coordinates that we are using for Sunset have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sunset
    • Sunset is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Sunset <3>
  • Surry
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Surry have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Surry
    • Surry is located in Hancock County
    • Population from the 2020 Census: 1,504 people
    • Jump to TripAdvisor's Tourism page for Surry <3>
  • Swanville
    (24 miles [38.6 km] to the west)
    • Note: The GPS coordinates that we are using for Swanville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Swanville
    • Swanville is located in Waldo County
    • Population from the 2020 Census: 1,359 people
    • Jump to TripAdvisor's Tourism page for Swanville <3>
  • Trenton
    (14 miles [22.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Trenton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Trenton
    • Trenton is located in Hancock County
    • Population from the 2020 Census: 1,568 people
    • Jump to TripAdvisor's Tourism page for Trenton <3>
  • Veazie
    (17 miles [27.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Veazie have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Veazie
    • Veazie is located in Penobscot County
    • Population from the 2020 Census: 1,824 people
    • Jump to TripAdvisor's Tourism page for Veazie <3>
  • West Tremont
    (25 miles [40.2 km] to the south)
    • Note: The GPS coordinates that we are using for West Tremont have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Tremont
    • West Tremont is located in Hancock County
    • Jump to TripAdvisor's Tourism page for West Tremont <3>
  • Winter Harbor
    (26 miles [41.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Winter Harbor have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winter Harbor
    • Winter Harbor is located in Hancock County
    • Population from the 2020 Census: 510 people
    • Jump to TripAdvisor's Tourism page for Winter Harbor <3>
  • Winterport
    (15 miles [24.1 km] to the west)
    • Note: The GPS coordinates that we are using for Winterport have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winterport
    • Winterport is located in Waldo County
    • Population from the 2020 Census: 4,028 people
    • Jump to TripAdvisor's Tourism page for Winterport <3>

Unfortunately, we don't know of an official website for Hurds Corner. If you can help, please contact us through our Feedback Page.

The official website for Hancock County: www.co.hancock.me.us/

The official website for State of Maine: https://www.maine.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Hurds Corner) to Point B.Our distance measurements begin at a specific point in Hurds Corner. The point we use is located at these GPS coordinates - Latitude: 44.6156, Longitude: -68.5261       In this case, the coordinates for Hurds Corner have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024