Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Rockford (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Rockford. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Rockford is located in Floyd County.
To see how the shape of Iowa's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Floyd County: Bremer, Butler, Cerro Gordo, Chickasaw, Franklin, Howard, Mitchell & Worth.
Below are the counties that are near Rockford. For each of these counties, we show a sample of those communities that are closest to Rockford:
- Floyd County (The home county of Rockford)
- The following are listed by their distance from Rockford, with the one closest to Rockford listed first.
- Rudd
(5 miles [8 km] to the northeast)
- Aureola
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Aureola have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aureola
- Aureola is located in Floyd County
- Roseville
(7 miles [11.3 km] to the east)
- Nora Springs
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Nora Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nora Springs
- Nora Springs is located in Floyd County
- Population from the 2020 Census: 1,342 people
- Jump to TripAdvisor's Tourism page for Nora Springs <1>
- Marble Rock
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Marble Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marble Rock
- Marble Rock is located in Floyd County
- Population from the 2020 Census: 287 people
- Jump to TripAdvisor's Tourism page for Marble Rock <1>
- Oakwood
(9 miles [14.5 km] to the east)
- Floyd
(11 miles [17.7 km] to the northeast)
- Charles City
(14 miles [22.5 km] to the east)
- Carrville
(19 miles [30.6 km] to the east)
- Colwell
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Colwell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colwell
- Colwell is located in Floyd County
- Population from the 2020 Census: 67 people
- Jump to TripAdvisor's Tourism page for Colwell <1>
- Bremer County
- The following are listed by their distance from Rockford, with the one closest to Rockford listed first.
- Plainfield
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Plainfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainfield
- Plainfield is located in Bremer County
- Population from the 2020 Census: 413 people
- Jump to TripAdvisor's Tourism page for Plainfield <1>
- Horton
(27 miles [43.5 km] to the southeast)
- Butler County
- The following are listed by their distance from Rockford, with the one closest to Rockford listed first.
- Greene
(13 miles [20.9 km] to the southeast)
- Aredale
(15 miles [24.1 km] to the south)
- Bristow
(19 miles [30.6 km] to the south)
- Dumont
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Dumont have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dumont
- Dumont is located in Butler County
- Population from the 2020 Census: 595 people
- Jump to TripAdvisor's Tourism page for Dumont <1>
- Allison
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Allison have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Allison
- Allison is located in Butler County
- Population from the 2020 Census: 965 people
- Jump to TripAdvisor's Tourism page for Allison <1>
- Clarksville
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Clarksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarksville
- Clarksville is located in Butler County
- Population from the 2020 Census: 1,333 people
- Jump to TripAdvisor's Tourism page for Clarksville <1>
- Butler Center
(25 miles [40.2 km] to the south)
- Kesley
(27 miles [43.5 km] to the south)
- Coster
(28 miles [45.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Coster. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Coster
- Coster is located in Butler County
- Google driving directions:
- From your current location to Coster
- From Rockford to Coster
- Shell Rock
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Shell Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shell Rock
- Shell Rock is located in Butler County
- Population from the 2020 Census: 1,268 people
- Jump to TripAdvisor's Tourism page for Shell Rock <1>
- Cerro Gordo County
- The following are listed by their distance from Rockford, with the one closest to Rockford listed first.
- Cartersville
(7 miles [11.3 km] to the southwest)
- Dougherty
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Dougherty have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dougherty
- Dougherty is located in Cerro Gordo County
- Population from the 2020 Census: 56 people
- Portland
(10 miles [16.1 km] to the northwest)
- Rock Falls
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Rock Falls have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock Falls
- Rock Falls is located in Cerro Gordo County
- Population from the 2020 Census: 146 people
- Cameron
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Cameron. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cameron
- Cameron is located in Cerro Gordo County
- Google driving directions:
- From your current location to Cameron
- From Rockford to Cameron
- Mason City Junction
(12 miles [19.3 km] to the west)
- Rockwell
(13 miles [20.9 km] to the west)
- Mason City
(14 miles [22.5 km] to the northwest)
- Plymouth Junction
(15 miles [24.1 km] to the northwest)
- Plymouth
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Plymouth have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plymouth
- Plymouth is located in Cerro Gordo County
- Population from the 2020 Census: 361 people
- Burchinal
(16 miles [25.7 km] to the west)
- Swaledale
(19 miles [30.6 km] to the west)
- Clear Lake
(22 miles [35.4 km] to the west)
- Chickasaw County
- The following are listed by their distance from Rockford, with the one closest to Rockford listed first.
- Bassett
(21 miles [33.8 km] to the east)
- Nashua
(21 miles [33.8 km] to the east)
- Chickasaw
(22 miles [35.4 km] to the east)
- Bradford
(23 miles [37 km] to the east)
- Deerfield
(24 miles [38.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Deerfield. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Deerfield
- Deerfield is located in Chickasaw County
- Google driving directions:
- From your current location to Deerfield
- From Rockford to Deerfield
- Ionia
(24 miles [38.6 km] to the east)
- North Washington
(27 miles [43.5 km] to the east)
- Alta Vista
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Alta Vista have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alta Vista
- Alta Vista is located in Chickasaw County
- Population from the 2020 Census: 248 people
- Jump to TripAdvisor's Tourism page for Alta Vista <1>
- Republic
(28 miles [45.1 km] to the east)
- Franklin County
- The following are listed by their distance from Rockford, with the one closest to Rockford listed first.
- Sheffield
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Sheffield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sheffield
- Sheffield is located in Franklin County
- Population from the 2020 Census: 1,096 people
- Chapin
(20 miles [32.2 km] to the southwest)
- Hansell
(21 miles [33.8 km] to the south)
- Hampton
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Hampton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hampton
- Hampton is located in Franklin County
- Population from the 2020 Census: 4,162 people
- Jump to TripAdvisor's Tourism page for Hampton <1>
- Geneva
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Geneva have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Geneva
- Geneva is located in Franklin County
- Population from the 2020 Census: 154 people
- Jump to TripAdvisor's Tourism page for Geneva <1>
- Latimer
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Latimer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Latimer
- Latimer is located in Franklin County
- Population from the 2020 Census: 463 people
- Jump to TripAdvisor's Tourism page for Latimer <1>
- Faulkner
(30 miles [48.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Faulkner. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Faulkner
- Faulkner is located in Franklin County
- Google driving directions:
- From your current location to Faulkner
- From Rockford to Faulkner
- Coulter
(30 miles [48.3 km] to the southwest)
- Reeve
(30 miles [48.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Reeve. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Reeve
- Reeve is located in Franklin County
- Google driving directions:
- From your current location to Reeve
- From Rockford to Reeve
- Howard County
- The following are listed by their distance from Rockford, with the one closest to Rockford listed first.
- Elma
(29 miles [46.7 km] to the northeast)
- Riceville
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Riceville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riceville
- Riceville is located in Howard County
- Population from the 2020 Census: 762 people
- Jump to TripAdvisor's Tourism page for Riceville <1>
- Mitchell County
- The following are listed by their distance from Rockford, with the one closest to Rockford listed first.
- Rock Creek
(12 miles [19.3 km] to the north)
- Orchard
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Orchard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orchard
- Orchard is located in Mitchell County
- Population from the 2020 Census: 71 people
- Osage
(17 miles [27.4 km] to the northeast)
- Mitchell
(18 miles [29 km] to the north)
- Saint Ansgar
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Saint Ansgar have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Ansgar
- Saint Ansgar is located in Mitchell County
- Population from the 2020 Census: 1,125 people
- Jump to TripAdvisor's Tourism page for Saint Ansgar <1>
- New Haven
(22 miles [35.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for New Haven. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for New Haven
- New Haven is located in Mitchell County
- Google driving directions:
- From your current location to New Haven
- From Rockford to New Haven
- Carpenter
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Carpenter have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carpenter
- Carpenter is located in Mitchell County
- Population from the 2020 Census: 108 people
- Little Cedar
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Little Cedar have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Cedar
- Little Cedar is located in Mitchell County
- Stacyville
(27 miles [43.5 km] to the north)
- Toeterville
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Toeterville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toeterville
- Toeterville is located in Mitchell County
- Jump to TripAdvisor's Tourism page for Toeterville <1>
- Meyer
(30 miles [48.3 km] to the northeast)
- Worth County
- The following are listed by their distance from Rockford, with the one closest to Rockford listed first.
- Grafton
(20 miles [32.2 km] to the north)
- Manly
(20 miles [32.2 km] to the northwest)
- Bolan
(23 miles [37 km] to the north)
- Kensett
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Kensett have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kensett
- Kensett is located in Worth County
- Population from the 2020 Census: 249 people
- Hanlontown
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Hanlontown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hanlontown
- Hanlontown is located in Worth County
- Population from the 2020 Census: 220 people
- Fertile
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Fertile have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fertile
- Fertile is located in Worth County
- Population from the 2020 Census: 356 people
- Jump to TripAdvisor's Tourism page for Fertile <1>
- Northwood
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Northwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Northwood
- Northwood is located in Worth County
- Population from the 2020 Census: 1,958 people
- Jump to TripAdvisor's Tourism page for Northwood <1>
For an expanded list of the communities that are closest to Rockford, see our County-by-County Page for Rockford.
Cemeteries Near Rockford ...
Below are cemeteries that are in the vicinity of Rockford.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Rockford covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Rockford, with the one closest to Rockford listed first.
- Rockford Riverside Cemetery
(Less than 2 miles to the northeast)
- Flood Creek Cemetery
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for the Flood Creek Cemetery
- Note: The GPS coordinates that we are using for the Flood Creek Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Rudd Twp. Cemetery
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for the Rudd Twp. Cemetery
- Note: The GPS coordinates that we are using for the Rudd Twp. Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Rock Grove Twp. Cemetery
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for the Rock Grove Twp. Cemetery
- Note: The GPS coordinates that we are using for the Rock Grove Twp. Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Park Cemetery
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for the Park Cemetery
- Note: The GPS coordinates that we are using for the Park Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Evergreen Cemetery
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for the Evergreen Cemetery
- Note: The GPS coordinates that we are using for the Evergreen Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Westside Cemetery
(7 miles [11.3 km] to the southeast)
- Jump to our Gazetteer entry for the Westside Cemetery
- Note: The GPS coordinates that we are using for the Westside Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Hillside Cemetery
(7 miles [11.3 km] to the southeast)
- Jump to our Gazetteer entry for the Hillside Cemetery
- Note: The GPS coordinates that we are using for the Hillside Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Spring Grove Cemetery
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for the Spring Grove Cemetery
- Note: The GPS coordinates that we are using for the Spring Grove Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Methodist Cemetery
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for the Methodist Cemetery
- Note: The GPS coordinates that we are using for the Methodist Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Owen's Grove Cemetery
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for the Owen's Grove Cemetery
- Note: The GPS coordinates that we are using for the Owen's Grove Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- St. Patricks Catholic Cemetery
(9 miles [14.5 km] to the southwest)
- Continue List (172 more) ...
- Oscar Peterson Cemetery
(11 miles [17.7 km] to the north)
- Jump to our Gazetteer entry for the Oscar Peterson Cemetery
- Note: The GPS coordinates that we are using for the Oscar Peterson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Oakwood Cemetery
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for the Oakwood Cemetery
- Note: The GPS coordinates that we are using for the Oakwood Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Eden Cemetery
(11 miles [17.7 km] to the north)
- Jump to our Gazetteer entry for the Eden Cemetery
- Note: The GPS coordinates that we are using for the Eden Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
The Rand McNally Atlas shows that Rockford had a population of 1,010 people in 1895 with a post office and railroad service. In 2020, Rockford had a population of 813 people.
These communities are listed based on their distance from Rockford, with the one closest to Rockford listed first.
- Rudd
(5 miles [8 km] to the northeast)
- Marble Rock
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Marble Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marble Rock
- Marble Rock is located in Floyd County
- Population from the 2020 Census: 287 people
- Jump to TripAdvisor's Tourism page for Marble Rock <1>
- Nora Springs
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Nora Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nora Springs
- Nora Springs is located in Floyd County
- Population from the 2020 Census: 1,342 people
- Jump to TripAdvisor's Tourism page for Nora Springs <1>
- Floyd Crossing
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Floyd Crossing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Floyd Crossing
- Floyd Crossing is located in Floyd County
- Portland
(10 miles [16.1 km] to the northwest)
- Floyd
(11 miles [17.7 km] to the northeast)
- Rock Falls
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Rock Falls have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock Falls
- Rock Falls is located in Cerro Gordo County
- Population from the 2020 Census: 146 people
- Rock Creek
(12 miles [19.3 km] to the north)
- Mason City Junction
(12 miles [19.3 km] to the west)
- Cameron
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Cameron. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cameron
- Cameron is located in Cerro Gordo County
- Google driving directions:
- From your current location to Cameron
- From Rockford to Cameron
- Rockwell
(13 miles [20.9 km] to the west)
- Greene
(13 miles [20.9 km] to the southeast)
- Continue List (15 more) ...
- Charles City
(14 miles [22.5 km] to the east)
- Orchard
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Orchard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orchard
- Orchard is located in Mitchell County
- Population from the 2020 Census: 71 people
- Mason City
(14 miles [22.5 km] to the northwest)
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Rockford. See our List of 1890's Communities around Rockford.
Newspapers Published in the Vicinity of Rockford ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 120 newspapers that have been published in the area around Rockford.
We have organized these newspapers into two lists:
- A Local Newspaper List - focusing on the papers published in the immediate area of Rockford. There are actually two parts to this list - papers printed in the immediate area of Rockford and those printed in the larger area surrounding Rockford.
- An Extended Newspaper List - a longer list, sorted by paper name and containing those papers published within 30 miles [48.3 km]<6> of Rockford.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Rockford:
- Websites specific to Iowa
- Pages specific to Floyd County
- Genealogy information for nearby counties
- Bremer County
- Butler County
- Cerro Gordo County
- Chickasaw County
- Franklin County
- Howard County
- Mitchell County
- Worth County
- Cemetery Information and Directories for Iowa
Off-the-Road Links ...
Unfortunately, we don't know of a website for Rockford. If you can help, please contact us through our Feedback Page.
The official website for Floyd County: www.floydcoia.org/
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rockford, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Rockford) to Point B.Our distance measurements begin at a specific point in Rockford. The point we use is located at these GPS coordinates - Latitude: 43.0524, Longitude: -92.9501 |