RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Iowa >> Black Hawk County >> Jubilee >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Iowa

The Commemorative Quarter for Iowa





TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to Jubilee, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Jubilee - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 40 communities listed:

  • Alburnett
    (29 miles [46.7 km] to the southeast)
  • Atkins
    (29 miles [46.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Atkins have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Atkins
    • Atkins is located in Benton County
    • Population from the 2020 Census: 1,978 people
    • Jump to TripAdvisor's Tourism page for Atkins <2>
  • Cedar Falls
    (20 miles [32.2 km] to the northwest)
  • Center Point
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Center Point have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Center Point
    • Center Point is located in Linn County
    • Population from the 2020 Census: 2,560 people
    • Jump to TripAdvisor's Tourism page for Center Point <2>
  • Clutier
    (26 miles [41.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Clutier have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clutier
    • Clutier is located in Tama County
    • Population from the 2020 Census: 203 people
    • Jump to TripAdvisor's Tourism page for Clutier <2>
  • Coggon
    (30 miles [48.3 km] to the east)
  • Denver
    (23 miles [37 km] to the northwest)
    • Note: The GPS coordinates that we are using for Denver have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Denver
    • Denver is located in Bremer County
    • Population from the 2020 Census: 1,879 people
    • Jump to TripAdvisor's Tourism page for Denver <2>
  • Dike
    (27 miles [43.5 km] to the west)
    • Jump to our Gazetteer entry for Dike
    • Dike is located in Grundy County
    • Population from the 2020 Census: 1,267 people
    • Jump to TripAdvisor's Tourism page for Dike <2>
  • Dysart
    (18 miles [29 km] to the southwest)
    • Note: The GPS coordinates that we are using for Dysart have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dysart
    • Dysart is located in Tama County
    • Population from the 2020 Census: 1,311 people
    • Jump to TripAdvisor's Tourism page for Dysart <2>
  • Elberon
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Elberon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elberon
    • Elberon is located in Tama County
    • Population from the 2020 Census: 188 people
    • Jump to TripAdvisor's Tourism page for Elberon <2>
  • Evansdale
    (11 miles [17.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Evansdale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Evansdale
    • Evansdale is located in Black Hawk County
    • Population from the 2020 Census: 4,734 people
    • Jump to TripAdvisor's Tourism page for Evansdale <2>
  • Fairbank
    (17 miles [27.4 km] to the north)
    • Note: The GPS coordinates that we are using for Fairbank have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairbank
    • Fairbank is located in Buchanan County
    • Population from the 2020 Census: 1,132 people
    • Jump to TripAdvisor's Tourism page for Fairbank <2>
  • Hazleton
    (19 miles [30.6 km] to the northeast)
  • Hudson
    (17 miles [27.4 km] to the west)
    • Jump to our Gazetteer entry for Hudson
    • Hudson is located in Black Hawk County
    • Population from the 2020 Census: 2,473 people
    • Jump to TripAdvisor's Tourism page for Hudson <2>
  • Independence
    (12 miles [19.3 km] to the northeast)
  • Janesville
    (25 miles [40.2 km] to the northwest)
  • Jesup
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Jesup have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jesup
    • Jesup is located in Black Hawk County
    • Population from the 2020 Census: 2,711 people
    • Jump to TripAdvisor's Tourism page for Jesup <2>
  • Keystone
    (26 miles [41.8 km] to the south)
    • Note: The GPS coordinates that we are using for Keystone have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Keystone
    • Keystone is located in Benton County
    • Population from the 2020 Census: 615 people
    • Jump to TripAdvisor's Tourism page for Keystone <2>
  • La Porte City
    (6 miles [9.7 km] to the southwest)
  • Lamont
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Lamont have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lamont
    • Lamont is located in Buchanan County
    • Population from the 2020 Census: 456 people
    • Jump to TripAdvisor's Tourism page for Lamont <2>
  • Maynard
    (29 miles [46.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Maynard have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maynard
    • Maynard is located in Fayette County
    • Population from the 2020 Census: 472 people
    • Jump to TripAdvisor's Tourism page for Maynard <2>
  • Morrison
    (29 miles [46.7 km] to the west)
  • New Hartford
    (29 miles [46.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for New Hartford have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Hartford
    • New Hartford is located in Butler County
    • Population from the 2020 Census: 481 people
    • Jump to TripAdvisor's Tourism page for New Hartford <2>
  • Newhall
    (27 miles [43.5 km] to the south)
    • Note: The GPS coordinates that we are using for Newhall have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Newhall
    • Newhall is located in Benton County
    • Population from the 2020 Census: 846 people
    • Jump to TripAdvisor's Tourism page for Newhall <2>
  • Oelwein
    (22 miles [35.4 km] to the northeast)
  • Palo
    (27 miles [43.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Palo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Palo
    • Palo is located in Linn County
    • Population from the 2020 Census: 1,075 people
    • Jump to TripAdvisor's Tourism page for Palo <2>
  • Quasqueton
    (17 miles [27.4 km] to the east)
  • Readlyn
    (22 miles [35.4 km] to the north)
    • Note: The GPS coordinates that we are using for Readlyn have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Readlyn
    • Readlyn is located in Bremer County
    • Population from the 2020 Census: 854 people
    • Jump to TripAdvisor's Tourism page for Readlyn <2>
  • Reinbeck
    (25 miles [40.2 km] to the west)
    • Note: The GPS coordinates that we are using for Reinbeck have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Reinbeck
    • Reinbeck is located in Grundy County
    • Population from the 2020 Census: 1,613 people
    • Jump to TripAdvisor's Tourism page for Reinbeck <2>
  • Rowley
    (13 miles [20.9 km] to the east)
    • Note: The GPS coordinates that we are using for Rowley have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rowley
    • Rowley is located in Buchanan County
    • Population from the 2020 Census: 268 people
    • Jump to TripAdvisor's Tourism page for Rowley <2>
  • Shellsburg
    (23 miles [37 km] to the southeast)
  • Toddville
    (27 miles [43.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Toddville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Toddville
    • Toddville is located in Linn County
    • Jump to TripAdvisor's Tourism page for Toddville <2>
  • Traer
    (22 miles [35.4 km] to the southwest)
  • Tripoli
    (30 miles [48.3 km] to the north)
    • Note: The GPS coordinates that we are using for Tripoli have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tripoli
    • Tripoli is located in Bremer County
    • Population from the 2020 Census: 1,375 people
    • Jump to TripAdvisor's Tourism page for Tripoli <2>
  • Troy Mills
    (22 miles [35.4 km] to the east)
  • Urbana
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Urbana have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Urbana
    • Urbana is located in Benton County
    • Population from the 2020 Census: 1,498 people
    • Jump to TripAdvisor's Tourism page for Urbana <2>
  • Vinton
    (15 miles [24.1 km] to the south)
  • Washburn
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Washburn have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Washburn
    • Washburn is located in Black Hawk County
    • Jump to TripAdvisor's Tourism page for Washburn <2>
  • Waterloo
    (14 miles [22.5 km] to the northwest)
  • Waverly
    (30 miles [48.3 km] to the northwest)

Unfortunately, we don't know of an official website for Jubilee. If you can help, please contact us through our Feedback Page.

The official website for Black Hawk County: www.co.black-hawk.ia.us/

The official website for State of Iowa: https://www.iowa.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Jubilee) to Point B.Our distance measurements begin at a specific point in Jubilee. The point we use is located at these GPS coordinates - Latitude: 42.3842, Longitude: -92.1038       In this case, the coordinates for Jubilee have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024