RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of West Virginia >> Raleigh County >> Mountview >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
West Virginia

The Commemorative Quarter for West Virginia





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Mountview (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Mountview. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Mountview is primarily located in Raleigh County. A portion of Mountview extends into Summers County.

To see how the shape of West Virginia's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Raleigh County: Boone, Fayette, Kanawha, Mercer, Summers & Wyoming.

Below are the counties that are near Mountview. For each of these counties, we show a sample of those communities that are closest to Mountview:

  • Raleigh County     (The home county of Mountview)
    • The following are listed by their distance from Mountview, with the one closest to Mountview listed first.
    • Shady Spring
      (4 miles [6.4 km] to the northwest)
    • Daniels
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Daniels have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Daniels
      • Daniels is located in Raleigh County
      • Jump to TripAdvisor's Tourism page for Daniels <1>
    • Beaver
      (8 miles [12.9 km] to the northwest)
    • Tilden
      (8 miles [12.9 km] to the northwest)
      • Jump to our Gazetteer entry for Tilden
      • Tilden is located in Raleigh County
    • Coal City
      (8 miles [12.9 km] to the west)
      • Note: The GPS coordinates that we are using for Coal City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Coal City
      • Coal City is located in Raleigh County
    • Princewick
      (8 miles [12.9 km] to the west)
      • Jump to our Gazetteer entry for Princewick
      • Princewick is located in Raleigh County
    • Clifftop
      (9 miles [14.5 km] to the north)
      • Jump to our Gazetteer entry for Clifftop
      • Clifftop is located in Raleigh County
    • Pemberton
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Pemberton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pemberton
      • Pemberton is located in Raleigh County
    • Raleigh
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Raleigh have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Raleigh
      • Raleigh is located in Raleigh County
    • Beckley
      (11 miles [17.7 km] to the northwest)
    • Crab Orchard
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Crab Orchard have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crab Orchard
      • Crab Orchard is located in Raleigh County
      • Jump to TripAdvisor's Tourism page for Crab Orchard <1>
    • Mabscott
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Mabscott have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mabscott
      • Mabscott is located in Raleigh County
      • Population from the 2020 Census: 1,251 people
    • MacArthur
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for MacArthur have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for MacArthur
      • MacArthur is located in Raleigh County
      • Jump to TripAdvisor's Tourism page for MacArthur <1>
  • Fayette County
    • The following are listed by their distance from Mountview, with the one closest to Mountview listed first.
    • Prince
      (14 miles [22.5 km] to the north)
    • Quinnimont
      (14 miles [22.5 km] to the north)
      • Jump to our Gazetteer entry for Quinnimont
      • Quinnimont is located in Fayette County
    • Kilsyth
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Kilsyth have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kilsyth
      • Kilsyth is located in Fayette County
    • Mount Hope
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Mount Hope have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Hope
      • Mount Hope is located in Fayette County
      • Population from the 2020 Census: 1,259 people
      • Jump to TripAdvisor's Tourism page for Mount Hope <1>
    • Meadow Bridge
      (18 miles [29 km] to the northeast)
      • Note: The GPS coordinates that we are using for Meadow Bridge have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Meadow Bridge
      • Meadow Bridge is located in Fayette County
      • Population from the 2020 Census: 344 people
    • Sewell Knob ‑ Historic
      (19 miles [30.6 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Sewell Knob. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sewell Knob
      • Sewell Knob is located in Fayette County
      • Sewell Knob has also been known as:
      • Swell Knob
    • Harvey
      (20 miles [32.2 km] to the north)
      • Jump to our Gazetteer entry for Harvey
      • Harvey is located in Fayette County
    • Newlyn ‑ Historic
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Newlyn have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Newlyn
      • Newlyn is located in Fayette County
    • Redstar
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Redstar have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Redstar
      • Redstar is located in Fayette County
    • Stonecliff ‑ Historic
      (20 miles [32.2 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Stonecliff. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Stonecliff
      • Stonecliff is located in Fayette County
      • Stonecliff has also been known as:
      • Stone Cliff
    • Thurmond
      (21 miles [33.8 km] to the north)
    • Spring Dale
      (21 miles [33.8 km] to the northeast)
      • Jump to our Gazetteer entry for Spring Dale
      • Spring Dale is located in Fayette County
    • Pax
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Pax have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pax
      • Pax is located in Fayette County
      • Population from the 2020 Census: 150 people
  • Greenbrier County
    • The following are listed by their distance from Mountview, with the one closest to Mountview listed first.
    • Alderson
      (23 miles [37 km] to the east)
    • Vale
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Vale
      • Vale is located in Greenbrier County
    • Frazier
      (28 miles [45.1 km] to the east)
      • Jump to our Gazetteer entry for Frazier
      • Frazier is located in Greenbrier County
    • Rainelle
      (28 miles [45.1 km] to the northeast)
    • Fort Spring
      (29 miles [46.7 km] to the east)
      • Jump to our Gazetteer entry for Fort Spring
      • Fort Spring is located in Greenbrier County
    • McRoss
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for McRoss
      • McRoss is located in Greenbrier County
    • Rockland
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Rockland have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rockland
      • Rockland is located in Greenbrier County
    • Charmco
      (30 miles [48.3 km] to the northeast)
    • Crawley
      (30 miles [48.3 km] to the northeast)
    • Hines
      (30 miles [48.3 km] to the northeast)
      • Jump to our Gazetteer entry for Hines
      • Hines is located in Greenbrier County
    • Rupert
      (30 miles [48.3 km] to the northeast)
  • Logan County
    • Rich Creek
      (22 miles [35.4 km] to the southeast)
      • Jump to our Gazetteer entry for Rich Creek
      • Rich Creek is located in Logan County
  • McDowell County
    • The following are listed by their distance from Mountview, with the one closest to Mountview listed first.
    • Elkhorn
      (25 miles [40.2 km] to the southwest)
      • Jump to our Gazetteer entry for Elkhorn
      • Elkhorn is located in McDowell County
    • Northfork
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Northfork have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Northfork
      • Northfork is located in McDowell County
      • Population from the 2020 Census: 322 people
      • Jump to TripAdvisor's Tourism page for Northfork <1>
    • Keystone
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Keystone have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Keystone
      • Keystone is located in McDowell County
      • Population from the 2020 Census: 213 people
      • Jump to TripAdvisor's Tourism page for Keystone <1>
    • Kimball
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Kimball have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kimball
      • Kimball is located in McDowell County
      • Population from the 2020 Census: 147 people
      • Jump to TripAdvisor's Tourism page for Kimball <1>
    • Anawalt
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Anawalt have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Anawalt
      • Anawalt is located in McDowell County
      • Population from the 2020 Census: 172 people
    • Big Four
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Big Four
      • Big Four is located in McDowell County
    • Thorpe
      (30 miles [48.3 km] to the southwest)
      • Jump to our Gazetteer entry for Thorpe
      • Thorpe is located in McDowell County
  • Mercer County
    • The following are listed by their distance from Mountview, with the one closest to Mountview listed first.
    • Athens
      (15 miles [24.1 km] to the south)
    • Lashmeet
      (16 miles [25.7 km] to the southwest)
      • Jump to our Gazetteer entry for Lashmeet
      • Lashmeet is located in Mercer County
    • Oak Grove
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Oak Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Grove
      • Oak Grove is located in Mercer County
    • Elgood
      (18 miles [29 km] to the southeast)
      • Jump to our Gazetteer entry for Elgood
      • Elgood is located in Mercer County
    • Matoaka
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Matoaka have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Matoaka
      • Matoaka is located in Mercer County
      • Population from the 2020 Census: 193 people
    • Weyanoke
      (18 miles [29 km] to the southwest)
      • Jump to our Gazetteer entry for Weyanoke
      • Weyanoke is located in Mercer County
    • Princeton
      (19 miles [30.6 km] to the south)
    • Johnston Town
      (20 miles [32.2 km] to the south)
      • Note: The GPS coordinates that we are using for Johnston Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Johnston Town
      • Johnston Town is located in Mercer County
    • Oakvale
      (21 miles [33.8 km] to the south)
      • Jump to our Gazetteer entry for Oakvale
      • Oakvale is located in Mercer County
      • Population from the 2020 Census: 109 people
    • El Centro ‑ Historic
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for El Centro have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for El Centro
      • El Centro is located in Mercer County
    • Willowton
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Willowton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Willowton
      • Willowton is located in Mercer County
    • Montcalm
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Montcalm have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Montcalm
      • Montcalm is located in Mercer County
    • Edison
      (23 miles [37 km] to the south)
      • Jump to our Gazetteer entry for Edison
      • Edison is located in Mercer County
  • Monroe County
    • The following are listed by their distance from Mountview, with the one closest to Mountview listed first.
    • Ballard
      (19 miles [30.6 km] to the southeast)
      • Jump to our Gazetteer entry for Ballard
      • Ballard is located in Monroe County
    • Peterstown
      (22 miles [35.4 km] to the southeast)
    • Wolfcreek
      (24 miles [38.6 km] to the east)
      • Jump to our Gazetteer entry for Wolfcreek
      • Wolfcreek is located in Monroe County
    • Union
      (28 miles [45.1 km] to the east)
      • Jump to our Gazetteer entry for Union
      • Union is located in Monroe County
      • Population from the 2020 Census: 539 people
  • Summers County
    • The following are listed by their distance from Mountview, with the one closest to Mountview listed first.
    • Jumping Branch
      (4 miles [6.4 km] to the east)
      • Jump to our Gazetteer entry for Jumping Branch
      • Jumping Branch is located in Summers County
    • Nimitz
      (5 miles [8 km] to the east)
      • Jump to our Gazetteer entry for Nimitz
      • Nimitz is located in Summers County
    • Pipestem
      (8 miles [12.9 km] to the southeast)
    • True
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for True have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for True
      • True is located in Summers County
    • Hinton
      (9 miles [14.5 km] to the east)
    • Bellepoint
      (10 miles [16.1 km] to the east)
      • Jump to our Gazetteer entry for Bellepoint
      • Bellepoint is located in Summers County
    • Buck
      (13 miles [20.9 km] to the east)
      • Note: The GPS coordinates that we are using for Buck have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Buck
      • Buck is located in Summers County
    • Sandstone
      (13 miles [20.9 km] to the northeast)
    • Forest Hill
      (15 miles [24.1 km] to the east)
    • Bargers Springs
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Bargers Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bargers Springs
      • Bargers Springs is located in Summers County
    • Talcott
      (17 miles [27.4 km] to the east)
  • Wyoming County
    • The following are listed by their distance from Mountview, with the one closest to Mountview listed first.
    • Bud
      (18 miles [29 km] to the southwest)
      • Jump to our Gazetteer entry for Bud
      • Bud is located in Wyoming County
    • Mullens
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for Mullens have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mullens
      • Mullens is located in Wyoming County
      • Population from the 2020 Census: 1,288 people
      • Jump to TripAdvisor's Tourism page for Mullens <1>
    • Keyrock
      (24 miles [38.6 km] to the west)
      • Jump to our Gazetteer entry for Keyrock
      • Keyrock is located in Wyoming County
    • Rock View
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Rock View have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rock View
      • Rock View is located in Wyoming County
    • Pineville
      (26 miles [41.8 km] to the west)
    • Mullensville
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Mullensville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mullensville
      • Mullensville is located in Wyoming County
    • Kopperston
      (28 miles [45.1 km] to the west)
      • Jump to our Gazetteer entry for Kopperston
      • Kopperston is located in Wyoming County
    • Turkey
      (28 miles [45.1 km] to the west)
      • Note: The GPS coordinates that we are using for Turkey have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Turkey
      • Turkey is located in Wyoming County
    • Wyoming
      (29 miles [46.7 km] to the west)
      • Jump to our Gazetteer entry for Wyoming
      • Wyoming is located in Wyoming County
    • Oceana
      (30 miles [48.3 km] to the west)
  • Bland County (VA)
    • The following are listed by their distance from Mountview, with the one closest to Mountview listed first.
    • Round Bottom
      (26 miles [41.8 km] to the south)
      • Jump to our Gazetteer entry for Round Bottom
      • Round Bottom is located in Bland County (VA)
    • Rocky Gap
      (27 miles [43.5 km] to the south)
      • Jump to our Gazetteer entry for Rocky Gap
      • Rocky Gap is located in Bland County (VA)
  • Giles County (VA)
    • The following are listed by their distance from Mountview, with the one closest to Mountview listed first.
    • Glen Lyn
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Glen Lyn have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glen Lyn
      • Glen Lyn is located in Giles County (VA)
      • Population from the 2020 Census: 97 people
    • Lurich
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Lurich have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lurich
      • Lurich is located in Giles County (VA)
    • Rich Creek
      (22 miles [35.4 km] to the southeast)
    • Narrows
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Narrows have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Narrows
      • Narrows is located in Giles County (VA)
      • Population from the 2020 Census: 1,949 people
      • Jump to TripAdvisor's Tourism page for Narrows <1>
    • Bluff City
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Bluff City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bluff City
      • Bluff City is located in Giles County (VA)
    • Pearisburg
      (28 miles [45.1 km] to the southeast)
    • Thessalia
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Thessalia have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Thessalia
      • Thessalia is located in Giles County (VA)
  • Tazewell County (VA)
    • The following are listed by their distance from Mountview, with the one closest to Mountview listed first.
    • Pocahontas
      (27 miles [43.5 km] to the southwest)
      • Jump to our Gazetteer entry for Pocahontas
      • Pocahontas is located in Tazewell County (VA)
      • Population from the 2020 Census: 348 people
    • Yards
      (27 miles [43.5 km] to the southwest)
      • Jump to our Gazetteer entry for Yards
      • Yards is located in Tazewell County (VA)
    • Falls Mills
      (28 miles [45.1 km] to the southwest)
      • Jump to our Gazetteer entry for Falls Mills
      • Falls Mills is located in Tazewell County (VA)
    • Bluefield
      (29 miles [46.7 km] to the south)
    • Boissevain
      (30 miles [48.3 km] to the southwest)
      • Jump to our Gazetteer entry for Boissevain
      • Boissevain is located in Tazewell County (VA)

For an expanded list of the communities that are closest to Mountview, see our County-by-County Page for Mountview.

Newspapers Published in Mountview ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 25 newspapers that have been published in the area around Mountview.

Although we're unaware of any newspapers that were published in the immediate area of Mountview, there are papers which were published within 11 miles [17.7 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Mountview.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Mountview:

Cemeteries Near Mountview ...

Below are cemeteries that are in the vicinity of Mountview.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Mountview covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Mountview, with the one closest to Mountview listed first.

  • Lilly Cemetery
    (3 miles [4.8 km] to the southwest)
  • Williams Cemetery
    (3 miles [4.8 km] to the north)
  • Camp Creek Cemetery
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Camp Creek Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Camp Creek Cemetery
  • Russ Lilly Cemetery
    (4 miles [6.4 km] to the northwest)
  • Crook Cemetery
    (4 miles [6.4 km] to the northwest)
  • Lilly - Crews Cemetery
    (5 miles [8 km] to the east)
    • To give a relative sense of its location, the Lilly - Crews Cemetery is a large cemetery that is located less than 2 miles<4> to the north of Nimitz.
    • The Lilly - Crews Cemetery has also been known as:
    • Crews Cemetery
    • Jump to our Gazetteer entry for the Lilly - Crews Cemetery
    • Jump to Find-A-Grave: FG ID #1960819 <5>
  • Hatcher Cemetery
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for the Hatcher Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hatcher Cemetery
  • Hatcher Cemetery
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for the Hatcher Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hatcher Cemetery
  • Dunns Cemetery
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for the Dunns Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Dunns Cemetery
  • Hall Family Cemetery
    (6 miles [9.7 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for the Hall Family Cemetery. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • To give a relative sense of its location, the Hall Family Cemetery is located less than 2 miles<4> to the south of Shady Spring.
    • Jump to our Gazetteer entry for the Hall Family Cemetery
  • Brammer Cemetery
    (7 miles [11.3 km] to the southwest)
  • Meador Cemetery
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for the Meador Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Meador Cemetery
  • Continue List   (439 more) ...
    • Restwood Cemetery
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for the Restwood Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Restwood Cemetery
    • Snider Cemetery
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for the Snider Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Snider Cemetery
    • Adkins Family Cemetery
      (8 miles [12.9 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for the Adkins Family Cemetery. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for the Adkins Family Cemetery
      • Jump to Find-A-Grave: FG ID #2454122 <5>

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

While we didn't find Mountview in the Atlas, the following 1895 communities would have been found near the current location of Mountview.

These communities are listed based on their distance from Mountview, with the one closest to Mountview listed first.

  • Flat Top
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Flat Top have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Flat Top
    • Flat Top is located in Mercer County
    • Jump to TripAdvisor's Tourism page for Flat Top <1>
  • Shady Spring
    (4 miles [6.4 km] to the northwest)
  • Jumping Branch
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for Jumping Branch
    • Jumping Branch is located in Summers County
  • Ellison
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Ellison have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ellison
    • Ellison is located in Summers County
  • Dunns
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Dunns have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dunns
    • Dunns is located in Mercer County
  • Odd
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Odd have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Odd
    • Odd is located in Raleigh County
  • Daniels
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Daniels have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Daniels
    • Daniels is located in Raleigh County
    • Jump to TripAdvisor's Tourism page for Daniels <1>
  • Pipestem
    (8 miles [12.9 km] to the southeast)
  • True
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for True have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for True
    • True is located in Summers County
  • Crow
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Crow have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crow
    • Crow is located in Raleigh County
  • Packs Ferry
    (9 miles [14.5 km] to the east)
    • Note: The GPS coordinates that we are using for Packs Ferry have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Packs Ferry
    • Packs Ferry is located in Summers County
  • Hinton
    (9 miles [14.5 km] to the east)
  • Continue List   (14 more) ...
    • Pemberton
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Pemberton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pemberton
      • Pemberton is located in Raleigh County
    • Egeria
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Egeria have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Egeria
      • Egeria is located in Mercer County
    • Warford ‑ Historic
      (11 miles [17.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Warford have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Warford
      • Warford is located in Summers County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Mountview. See our List of 1890's Communities around Mountview.

Unfortunately, we don't know of a website for Mountview. If you can help, please contact us through our Feedback Page.

The official website for State of West Virginia: https://www.wv.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Mountview) to Point B.Our distance measurements begin at a specific point in Mountview. The point we use is located at these GPS coordinates - Latitude: 37.6421, Longitude: -81.0654       In this case, the coordinates for Mountview have been provided by the Geographic Names Information System (GNIS).
<5>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Mountview, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024