Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Jimtown (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Jimtown. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Jimtown is located in Richland County.
To see how the shape of Wisconsin's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Richland County: Crawford, Grant, Iowa, Sauk & Vernon.
Below are the counties that are near Jimtown. For each of these counties, we show a sample of those communities that are closest to Jimtown:
- Richland County (The home county of Jimtown)
- The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
- Boaz
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Boaz have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boaz
- Boaz is located in Richland County
- Population from the 2020 Census: 148 people
- Sabin
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Sabin. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Sabin
- Sabin is located in Richland County
- Viola
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Viola
- Viola is located in Richland County
- Population from the 2020 Census: 665 people
- Gillingham
(10 miles [16.1 km] to the northeast)
- Jump to our Gazetteer entry for Gillingham
- Gillingham is located in Richland County
- Westport
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Westport have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westport
- Westport is located in Richland County
- Richland Center
(12 miles [19.3 km] to the east)
- Jump to our Gazetteer entry for Richland Center
- Richland Center is located in Richland County
- Population from the 2020 Census: 4,949 people
- Balmoral
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Balmoral. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Balmoral
- Balmoral is located in Richland County
- Bloom City
(13 miles [20.9 km] to the northeast)
- Jump to our Gazetteer entry for Bloom City
- Bloom City is located in Richland County
- Hub City
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Hub City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hub City
- Hub City is located in Richland County
- Yuba
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Yuba have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yuba
- Yuba is located in Richland County
- Population from the 2020 Census: 69 people
- Aubrey
(17 miles [27.4 km] to the east)
- Jump to our Gazetteer entry for Aubrey
- Aubrey is located in Richland County
- Ithaca
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Ithaca. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Ithaca
- Ithaca is located in Richland County
- Crawford County
- The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
- Soldiers Grove
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Soldiers Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Soldiers Grove
- Soldiers Grove is located in Crawford County
- Population from the 2020 Census: 535 people
- Bell Center
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Bell Center. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Bell Center
- Bell Center is located in Crawford County
- Population from the 2020 Census: 114 people
- Gays Mills
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Gays Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gays Mills
- Gays Mills is located in Crawford County
- Population from the 2020 Census: 504 people
- Petersburg
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Petersburg
- Petersburg is located in Crawford County
- Towerville
(13 miles [20.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Towerville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Towerville
- Towerville is located in Crawford County
- Mount Sterling
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Mount Sterling have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Sterling
- Mount Sterling is located in Crawford County
- Population from the 2020 Census: 196 people
- Steuben
(16 miles [25.7 km] to the southwest)
- Jump to our Gazetteer entry for Steuben
- Steuben is located in Crawford County
- Population from the 2020 Census: 121 people
- Rising Sun
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Rising Sun. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rising Sun
- Rising Sun is located in Crawford County
- Boydtown
(18 miles [29 km] to the southwest)
- Jump to our Gazetteer entry for Boydtown
- Boydtown is located in Crawford County
- Wauzeka
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Wauzeka have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wauzeka
- Wauzeka is located in Crawford County
- Population from the 2020 Census: 733 people
- Ferryville
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Ferryville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ferryville
- Ferryville is located in Crawford County
- Population from the 2020 Census: 173 people
- Freeman
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Freeman have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Freeman
- Freeman is located in Crawford County
- Grant County
- The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
- Blue River
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Blue River have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blue River
- Blue River is located in Grant County
- Population from the 2020 Census: 418 people
- Boscobel
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Boscobel have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boscobel
- Boscobel is located in Grant County
- Population from the 2020 Census: 3,134 people
- Muscoda
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Muscoda have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Muscoda
- Muscoda is located in Grant County
- Population from the 2020 Census: 1,236 people
- Woodman
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Woodman have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodman
- Woodman is located in Grant County
- Population from the 2020 Census: 129 people
- Fennimore
(25 miles [40.2 km] to the south)
- Jump to our Gazetteer entry for Fennimore
- Fennimore is located in Grant County
- Population from the 2020 Census: 2,469 people
- Preston
(26 miles [41.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Preston. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Preston
- Preston is located in Grant County
- Millville
(26 miles [41.8 km] to the southwest)
- Jump to our Gazetteer entry for Millville
- Millville is located in Grant County
- Mount Ida
(27 miles [43.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Mount Ida. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Mount Ida
- Mount Ida is located in Grant County
- Montfort
(28 miles [45.1 km] to the south)
- Jump to our Gazetteer entry for Montfort
- Montfort is located in Grant County
- Population from the 2020 Census: 675 people
- Mount Hope
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Mount Hope have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Hope
- Mount Hope is located in Grant County
- Population from the 2020 Census: 216 people
- Stitzer
(29 miles [46.7 km] to the south)
- Jump to our Gazetteer entry for Stitzer
- Stitzer is located in Grant County
- Annaton
(30 miles [48.3 km] to the south)
- Jump to our Gazetteer entry for Annaton
- Annaton is located in Grant County
- Iowa County
- The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
- Avoca
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Avoca have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Avoca
- Avoca is located in Iowa County
- Population from the 2020 Census: 620 people
- Highland
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Highland have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Highland
- Highland is located in Iowa County
- Population from the 2020 Census: 826 people
- Centreville ‑ Historic
(25 miles [40.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Centreville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Centreville
- Centreville is located in Iowa County
- Former name for Centreville:
- Dry Bone
- Cobb
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Cobb have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cobb
- Cobb is located in Iowa County
- Population from the 2020 Census: 455 people
- Juneau County
- The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
- Union Center
(29 miles [46.7 km] to the northeast)
- Jump to our Gazetteer entry for Union Center
- Union Center is located in Juneau County
- Population from the 2020 Census: 193 people
- Wonewoc
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Wonewoc have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wonewoc
- Wonewoc is located in Juneau County
- Population from the 2020 Census: 789 people
- Monroe County
- The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
- Cashton
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Cashton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cashton
- Cashton is located in Monroe County
- Population from the 2020 Census: 1,111 people
- Oil City
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Oil City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oil City
- Oil City is located in Monroe County
- Sauk County
- The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
- Sandusky
(24 miles [38.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Sandusky. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Sandusky
- Sandusky is located in Sauk County
- Lime Ridge
(25 miles [40.2 km] to the east)
- Jump to our Gazetteer entry for Lime Ridge
- Lime Ridge is located in Sauk County
- Population from the 2020 Census: 163 people
- Ironton
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Ironton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ironton
- Ironton is located in Sauk County
- Population from the 2020 Census: 251 people
- Loganville
(30 miles [48.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Loganville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Loganville
- Loganville is located in Sauk County
- Population from the 2020 Census: 297 people
- Plain
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Plain have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plain
- Plain is located in Sauk County
- Population from the 2020 Census: 765 people
- La Valle
(30 miles [48.3 km] to the northeast)
- Jump to our Gazetteer entry for La Valle
- La Valle is located in Sauk County
- Population from the 2020 Census: 360 people
- Vernon County
- The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
- Readstown
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Readstown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Readstown
- Readstown is located in Vernon County
- Population from the 2020 Census: 414 people
- Liberty
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liberty
- Liberty is located in Vernon County
- La Farge
(15 miles [24.1 km] to the north)
- Jump to our Gazetteer entry for La Farge
- La Farge is located in Vernon County
- Population from the 2020 Census: 763 people
- Liberty Pole
(16 miles [25.7 km] to the northwest)
- Jump to our Gazetteer entry for Liberty Pole
- Liberty Pole is located in Vernon County
- Fargo
(17 miles [27.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Fargo. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Fargo
- Fargo is located in Vernon County
- Viroqua
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Viroqua have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Viroqua
- Viroqua is located in Vernon County
- Population from the 2020 Census: 4,394 people
- White City
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for White City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White City
- White City is located in Vernon County
- Purdy
(23 miles [37 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Purdy. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Purdy
- Purdy is located in Vernon County
- Westby
(23 miles [37 km] to the northwest)
- Jump to our Gazetteer entry for Westby
- Westby is located in Vernon County
- Population from the 2020 Census: 2,254 people
- Retreat
(23 miles [37 km] to the west)
- Jump to our Gazetteer entry for Retreat
- Retreat is located in Vernon County
- Mount Tabor
(25 miles [40.2 km] to the north)
- Jump to our Gazetteer entry for Mount Tabor
- Mount Tabor is located in Vernon County
- Hillsboro
(25 miles [40.2 km] to the northeast)
- Jump to our Gazetteer entry for Hillsboro
- Hillsboro is located in Vernon County
- Population from the 2020 Census: 1,387 people
- Allamakee County (IA)
- The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
- Harpers Ferry
(27 miles [43.5 km] to the west)
- Lansing
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Lansing have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lansing
- Lansing is located in Allamakee County (IA)
- Population from the 2020 Census: 933 people
- Jump to TripAdvisor's Tourism page for Lansing <3>
- Waukon Junction
(30 miles [48.3 km] to the southwest)
- Jump to our Gazetteer entry for Waukon Junction
- Waukon Junction is located in Allamakee County (IA)
For an expanded list of the communities that are closest to Jimtown, see our County-by-County Page for Jimtown.
Cemeteries Near Jimtown ...
Below are cemeteries that are in the vicinity of Jimtown.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Jimtown covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Jimtown, with the one closest to Jimtown listed first.
- St. Peters Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the St. Peters Cemetery
- Note: The GPS coordinates that we are using for the St. Peters Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Felton Cemetery
(2 miles [3.2 km] to the northeast)
- Jump to our Gazetteer entry for the Felton Cemetery
- Note: The GPS coordinates that we are using for the Felton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Five Points Cemetery
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for the Five Points Cemetery
- Note: The GPS coordinates that we are using for the Five Points Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- St. Phillips Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the St. Phillips Cemetery
- Note: The GPS coordinates that we are using for the St. Phillips Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Tavera Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Tavera Cemetery
- Note: The GPS coordinates that we are using for the Tavera Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Sylvan Cemetery
(4 miles [6.4 km] to the north)
- Jump to our Gazetteer entry for the Sylvan Cemetery
- Note: The GPS coordinates that we are using for the Sylvan Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Mill Creek Cemetery
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for the Mill Creek Cemetery
- Note: The GPS coordinates that we are using for the Mill Creek Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- North Clayton Cemetery
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for the North Clayton Cemetery
- Note: The GPS coordinates that we are using for the North Clayton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Mook Cemetery
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for the Mook Cemetery
- Note: The GPS coordinates that we are using for the Mook Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Immanuel Lutheran Cemetery
(5 miles [8 km] to the southeast)
- Jump to our Gazetteer entry for the Immanuel Lutheran Cemetery
- To give a relative sense of its location, the Immanuel Lutheran Cemetery is located 4 miles [6.4 km]<4> to the northeast of Boaz.
- The Immanuel Lutheran Cemetery has also been known as:
- Maple Ridge Cemetery
- Jump to Find-A-Grave: FG ID #2350091 <5>
- Sugar Grove Cemetery
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for the Sugar Grove Cemetery
- Note: The GPS coordinates that we are using for the Sugar Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Boaz Cemetery
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for the Boaz Cemetery
- Note: The GPS coordinates that we are using for the Boaz Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Continue List (216 more) ...
- Conkle Cemetery
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for the Conkle Cemetery
- Note: The GPS coordinates that we are using for the Conkle Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Montgomeryville Cemetery
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for the Montgomeryville Cemetery
- Note: The GPS coordinates that we are using for the Montgomeryville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- West Fork Cemetery
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for the West Fork Cemetery
- Note: The GPS coordinates that we are using for the West Fork Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>
While we didn't find Jimtown in the Atlas, the following 1895 communities would have been found near the current location of Jimtown.
These communities are listed based on their distance from Jimtown, with the one closest to Jimtown listed first.
- Five Points
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Five Points have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Five Points
- Five Points is located in Richland County
- Sylvan
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Sylvan have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sylvan
- Sylvan is located in Richland County
- North Clayton
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for North Clayton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Clayton
- North Clayton is located in Crawford County
- Sugar Grove
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Sugar Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sugar Grove
- Sugar Grove is located in Vernon County
- Boaz
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Boaz have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boaz
- Boaz is located in Richland County
- Population from the 2020 Census: 148 people
- Mill Creek ‑ Historic
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Mill Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Creek
- Mill Creek is located in Richland County
- Sabin
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Sabin. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Sabin
- Sabin is located in Richland County
- Excelsior
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Excelsior have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Excelsior
- Excelsior is located in Richland County
- Soldiers Grove
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Soldiers Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Soldiers Grove
- Soldiers Grove is located in Crawford County
- Population from the 2020 Census: 535 people
- Readstown
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Readstown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Readstown
- Readstown is located in Vernon County
- Population from the 2020 Census: 414 people
- Basswood
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Basswood have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Basswood
- Basswood is located in Richland County
- Bell Center
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Bell Center. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Bell Center
- Bell Center is located in Crawford County
- Population from the 2020 Census: 114 people
- Continue List (17 more) ...
- Westport
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Westport have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westport
- Westport is located in Richland County
- Byrds Creek
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Byrds Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Byrds Creek
- Byrds Creek is located in Richland County
- Gillingham
(10 miles [16.1 km] to the northeast)
- Jump to our Gazetteer entry for Gillingham
- Gillingham is located in Richland County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Jimtown. See our List of 1890's Communities around Jimtown.
Newspapers Published in Jimtown ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 123 newspapers that have been published in the area around Jimtown.
Although we're unaware of any newspapers that were published in the immediate area of Jimtown, there are papers which were published within 30 miles [48.3 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Jimtown.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Jimtown:
- Websites specific to Wisconsin
- Pages specific to Richland County
- Genealogy information for nearby counties
- Crawford County
- Grant County
- Iowa County
- Juneau County
- Monroe County
- Sauk County
- Vernon County
- Allamakee County
- Cemetery Information and Directories for Wisconsin
Off-the-Road Links ...
Unfortunately, we don't know of a website for Jimtown. If you can help, please contact us through our Feedback Page.
The official website for Richland County: www.co.richland.wi.us/
The official website for State of Wisconsin: https://www.wisconsin.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Jimtown) to Point B.Our distance measurements begin at a specific point in Jimtown. The point we use is located at these GPS coordinates - Latitude: 43.3533, Longitude: -90.6385 In this case, the coordinates for Jimtown have been provided by the Geographic Names Information System (GNIS). |
<5> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<6> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Jimtown, please let us know so that we can improve our accuracy. |