RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Denton County >> Parvin >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that in 1895, Parvin had a post office and no railroad service.

The following communities are listed based on their distance from Parvin, with the one closest to Parvin listed first.

  • Navo
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Navo have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Navo
    • Navo is located in Denton County
  • Little Elm
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Little Elm have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Little Elm
    • Little Elm is located in Denton County
    • Population from the 2020 Census: 56,625 people
    • Jump to TripAdvisor's Tourism page for Little Elm <3>
  • Mustang
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Mustang have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mustang
    • Mustang is located in Denton County
  • Celina
    (6 miles [9.7 km] to the northeast)
  • Rhea Mills
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Rhea Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rhea Mills
    • Rhea Mills is located in Collin County
  • Aubrey
    (7 miles [11.3 km] to the northwest)
  • Lebanon
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lebanon
    • Lebanon is located in Collin County
  • Pilot Point
    (11 miles [17.7 km] to the northwest)
  • Mingo
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Mingo have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mingo
    • Mingo is located in Denton County
  • Roland
    (12 miles [19.3 km] to the east)
    • Note: The GPS coordinates that we are using for Roland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Roland
    • Roland is located in Collin County
  • Weston
    (12 miles [19.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Weston have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Weston
    • Weston is located in Collin County
    • Population from the 2020 Census: 543 people
    • Jump to TripAdvisor's Tourism page for Weston <3>
  • Corinth
    (13 miles [20.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Corinth have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Corinth
    • Corinth is located in Denton County
    • Population from the 2020 Census: 22,365 people
    • Jump to TripAdvisor's Tourism page for Corinth <3>
  • McKinney
    (13 miles [20.9 km] to the east)
  • Hebron
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Hebron have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hebron
    • Hebron is located in Collin County
    • Population from the 2020 Census: 212 people
  • Lewisville
    (15 miles [24.1 km] to the southwest)
  • Allen
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Allen have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Allen
    • Allen is located in Collin County
    • Population from the 2020 Census: 109,379 people
    • Jump to TripAdvisor's Tourism page for Allen <3>
  • Denton
    (15 miles [24.1 km] to the west)
  • Tioga
    (15 miles [24.1 km] to the north)
    • Jump to our Gazetteer entry for Tioga
    • Tioga is located in Grayson County
    • Population from the 2020 Census: 1,117 people
    • Jump to TripAdvisor's Tourism page for Tioga <3>
  • Bloomfield
    (16 miles [25.7 km] to the northwest)
    • Jump to our Gazetteer entry for Bloomfield
    • Bloomfield is located in Cooke County
  • Melissa
    (17 miles [27.4 km] to the east)
  • Elmont
    (17 miles [27.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Elmont have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elmont
    • Elmont is located in Grayson County
  • Carrollton
    (18 miles [29 km] to the south)
    • Note: The GPS coordinates that we are using for Carrollton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Carrollton
    • Carrollton is located in Collin County
    • Population from the 2020 Census: 139,892 people
    • Jump to TripAdvisor's Tourism page for Carrollton <3>
  • Renner
    (18 miles [29 km] to the south)
    • Note: The GPS coordinates that we are using for Renner have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Renner
    • Renner is located in Collin County
  • Mountain Springs
    (18 miles [29 km] to the northwest)
    • Note: The GPS coordinates that we are using for Mountain Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mountain Springs
    • Mountain Springs is located in Cooke County
  • Elm View
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Elm View have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elm View
    • Elm View is located in Grayson County

The official website for Denton County: www.co.denton.tx.us/

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Parvin, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024