Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Panorama Village in the Atlas, the following communities of the 1890's would have been found near the current location of Panorama Village. The following communities are listed based on their distance, with the one closest to Panorama Village listed first.
- Willis
(3 miles [4.8 km] to the north)- Jump to our Gazetteer entry for Willis
- Willis is located in Montgomery County
- Population from the 2020 Census: 7,122 people
- Jump to TripAdvisor's Tourism page for Willis <2>
- Conroe
(5 miles [8 km] to the southeast)- Jump to our Gazetteer entry for Conroe
- Conroe is located in Montgomery County
- Population from the 2020 Census: 96,214 people
- Jump to TripAdvisor's Tourism page for Conroe <2>
- New Waverly
(10 miles [16.1 km] to the north)- Note: The GPS coordinates that we are using for New Waverly have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Waverly
- New Waverly is located in Walker County
- Population from the 2020 Census: 1,073 people
- Jump to TripAdvisor's Tourism page for New Waverly <2>
- Egypt
(11 miles [17.7 km] to the south) - Montgomery
(12 miles [19.3 km] to the west)- Note: The GPS coordinates that we are using for Montgomery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montgomery
- Montgomery is located in Montgomery County
- Population from the 2020 Census: 1,639 people
- Jump to TripAdvisor's Tourism page for Montgomery <2>
- Maynard
(13 miles [20.9 km] to the northeast) - Bath
(16 miles [25.7 km] to the northwest) - Dacus
(18 miles [29 km] to the west)- Jump to our Gazetteer entry for Dacus
- Dacus is located in Montgomery County
- Evergreen
(19 miles [30.6 km] to the northeast)- Jump to our Gazetteer entry for Evergreen
- Evergreen is located in San Jacinto County
- Spring
(21 miles [33.8 km] to the south)- Jump to our Gazetteer entry for Spring
- Spring is located in Harris County
- Jump to TripAdvisor's Tourism page for Spring <2>
- Phelps
(21 miles [33.8 km] to the north) - New Caney
(22 miles [35.4 km] to the southeast)- Jump to our Gazetteer entry for New Caney
- New Caney is located in Montgomery County
- Jump to TripAdvisor's Tourism page for New Caney <2>
- Plantersville
(22 miles [35.4 km] to the west)- Note: The GPS coordinates that we are using for Plantersville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plantersville
- Plantersville is located in Grimes County
- Jump to TripAdvisor's Tourism page for Plantersville <2>
- Huntsville
(23 miles [37 km] to the north)- Jump to our Gazetteer entry for Huntsville
- Huntsville is located in Walker County
- Population from the 2020 Census: 41,392 people
- Jump to TripAdvisor's Tourism page for Huntsville <2>
- Rose Hill
(24 miles [38.6 km] to the southwest) - Cleveland
(24 miles [38.6 km] to the east)- Note: The GPS coordinates that we are using for Cleveland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cleveland
- Cleveland is located in Liberty County
- Population from the 2020 Census: 8,458 people
- Jump to TripAdvisor's Tourism page for Cleveland <2>
- Keno
(25 miles [40.2 km] to the east) - Dodge
(25 miles [40.2 km] to the north)- Note: The GPS coordinates that we are using for Dodge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dodge
- Dodge is located in Walker County
- Jump to TripAdvisor's Tourism page for Dodge <2>
- Apolonia
(25 miles [40.2 km] to the west) - Stoneham
(25 miles [40.2 km] to the west)- Jump to our Gazetteer entry for Stoneham
- Stoneham is located in Grimes County
- Coldspring
(26 miles [41.8 km] to the northeast)- Note: The GPS coordinates that we are using for Coldspring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coldspring
- Coldspring is located in San Jacinto County
- Population from the 2020 Census: 950 people
- Jump to TripAdvisor's Tourism page for Coldspring <2>
- Yarboro
(27 miles [43.5 km] to the west) - Whitehall
(29 miles [46.7 km] to the west) - Humble
(29 miles [46.7 km] to the southeast)- Jump to our Gazetteer entry for Humble
- Humble is located in Harris County
- Population from the 2020 Census: 15,539 people
- Jump to TripAdvisor's Tourism page for Humble <2>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Panorama Village. If you can help, please contact us through our Feedback Page.
The official website for Montgomery County: www.co.montgomery.tx.us/
The official website for State of Texas: https://texas.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Panorama Village, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |