Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Oenaville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Oenaville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Oenaville is located in Bell County.
To see how the shape of Texas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Bell County: Burnet, Coryell, Falls, Lampasas, McLennan, Milam & Williamson.
Below are the counties that are near Oenaville. For each of these counties, we show a sample of those communities that are closest to Oenaville:
- Bell County (The home county of Oenaville)
- The following are listed by their distance from Oenaville, with the one closest to Oenaville listed first.
- Troy
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Troy have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Troy
- Troy is located in Bell County
- Population from the 2020 Census: 2,191 people
- Jump to TripAdvisor's Tourism page for Troy <2>
- Ocker
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Ocker. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ocker
- Ocker is located in Bell County
- Google driving directions:
- From your current location to Ocker
- From Oenaville to Ocker
- Temple
(7 miles [11.3 km] to the west)
- Pendleton
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Pendleton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pendleton
- Pendleton is located in Bell County
- Jump to TripAdvisor's Tourism page for Pendleton <2>
- Cyclone
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Cyclone. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cyclone
- Cyclone is located in Bell County
- Google driving directions:
- From your current location to Cyclone
- From Oenaville to Cyclone
- Heidenheimer
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Heidenheimer have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Heidenheimer
- Heidenheimer is located in Bell County
- Jump to TripAdvisor's Tourism page for Heidenheimer <2>
- Meeks
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Meeks have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meeks
- Meeks is located in Bell County
- Academy
(12 miles [19.3 km] to the southwest)
- Little River-Academy
(12 miles [19.3 km] to the southwest)
- Little River
(12 miles [19.3 km] to the southwest)
- Rogers
(13 miles [20.9 km] to the south)
- Edgeworth
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Edgeworth. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Edgeworth
- Edgeworth is located in Bell County
- Google driving directions:
- From your current location to Edgeworth
- From Oenaville to Edgeworth
- Morgan's Point Resort
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Morgan's Point Resort have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morgan's Point Resort
- Morgan's Point Resort is located in Bell County
- Population from the 2020 Census: 4,785 people
- Jump to TripAdvisor's Tourism page for Morgan's Point Resort <2>
- Coryell County
- The following are listed by their distance from Oenaville, with the one closest to Oenaville listed first.
- The Grove
(20 miles [32.2 km] to the northwest)
- McGregor
(23 miles [37 km] to the northwest)
- Lime City
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Lime City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lime City
- Lime City is located in Coryell County
- Flat
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Flat have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flat
- Flat is located in Coryell County
- Jump to TripAdvisor's Tourism page for Flat <2>
- Leon Junction
(26 miles [41.8 km] to the northwest)
- Oglesby
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Oglesby have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oglesby
- Oglesby is located in Coryell County
- Population from the 2020 Census: 464 people
- Jump to TripAdvisor's Tourism page for Oglesby <2>
- Mound
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Mound have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mound
- Mound is located in Coryell County
- Jump to TripAdvisor's Tourism page for Mound <2>
- Mason Crossing ‑ Historic
(29 miles [46.7 km] to the west)
- Falls County
- The following are listed by their distance from Oenaville, with the one closest to Oenaville listed first.
- Westphalia
(6 miles [9.7 km] to the east)
- Durango
(7 miles [11.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Durango. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Durango
- Durango is located in Falls County
- Google driving directions:
- From your current location to Durango
- From Oenaville to Durango
- Zipperlandville ‑ Historic
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Zipperlandville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zipperlandville
- Zipperlandville is located in Falls County
- Zipperlandville has also been known as:
- Zipperlen
- Zipperlenville
- Bruceville - Eddy
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Bruceville - Eddy have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bruceville - Eddy
- Bruceville - Eddy is located in Falls County
- Population from the 2020 Census: 1,704 people
- Lott
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Lott have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lott
- Lott is located in Falls County
- Population from the 2020 Census: 744 people
- Jump to TripAdvisor's Tourism page for Lott <2>
- Mooreville
(13 miles [20.9 km] to the northeast)
- Chilton
(14 miles [22.5 km] to the northeast)
- Rosebud
(15 miles [24.1 km] to the east)
- Golinda
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Golinda have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Golinda
- Golinda is located in Falls County
- Population from the 2020 Census: 610 people
- Satin
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Satin have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Satin
- Satin is located in Falls County
- Jump to TripAdvisor's Tourism page for Satin <2>
- Wilderville
(20 miles [32.2 km] to the east)
- Highbank
(23 miles [37 km] to the east)
- Marlin
(23 miles [37 km] to the northeast)
- McLennan County
- The following are listed by their distance from Oenaville, with the one closest to Oenaville listed first.
- Eddy
(11 miles [17.7 km] to the north)
- Bruceville
(13 miles [20.9 km] to the north)
- Moody
(14 miles [22.5 km] to the northwest)
- Lorena
(17 miles [27.4 km] to the north)
- Rosenthal
(21 miles [33.8 km] to the north)
- Hewitt
(23 miles [37 km] to the north)
- Downsville
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Downsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Downsville
- Downsville is located in McLennan County
- Google driving directions:
- From your current location to Downsville
- From Oenaville to Downsville
- Robinson
(24 miles [38.6 km] to the north)
- Woodway
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Woodway have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodway
- Woodway is located in McLennan County
- Population from the 2020 Census: 9,077 people
- Jump to TripAdvisor's Tourism page for Woodway <2>
- Beverly Hills
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Beverly Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beverly Hills
- Beverly Hills is located in McLennan County
- Population from the 2020 Census: 1,980 people
- Waco
(29 miles [46.7 km] to the north)
- Riesel
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Riesel have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riesel
- Riesel is located in McLennan County
- Population from the 2020 Census: 1,049 people
- Jump to TripAdvisor's Tourism page for Riesel <2>
- East Waco
(30 miles [48.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for East Waco. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for East Waco
- East Waco is located in McLennan County
- Google driving directions:
- From your current location to East Waco
- From Oenaville to East Waco
- Milam County
- The following are listed by their distance from Oenaville, with the one closest to Oenaville listed first.
- Burlington
(15 miles [24.1 km] to the southeast)
- Buckholts
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Buckholts have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckholts
- Buckholts is located in Milam County
- Population from the 2020 Census: 518 people
- Jump to TripAdvisor's Tourism page for Buckholts <2>
- Val Verde
(20 miles [32.2 km] to the south)
- Silver City
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver City
- Silver City is located in Milam County
- Davilla
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Davilla have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Davilla
- Davilla is located in Milam County
- Jump to TripAdvisor's Tourism page for Davilla <2>
- Baileyville
(24 miles [38.6 km] to the east)
- Cameron
(24 miles [38.6 km] to the southeast)
- Jones Prairie
(25 miles [40.2 km] to the southeast)
- Marlow
(26 miles [41.8 km] to the southeast)
- Tracy
(27 miles [43.5 km] to the south)
- Maysfield
(27 miles [43.5 km] to the southeast)
- Crossroads
(28 miles [45.1 km] to the southeast)
- Minerva
(29 miles [46.7 km] to the southeast)
- Robertson County
- Hammond
(30 miles [48.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Hammond. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hammond
- Hammond is located in Robertson County
- Google driving directions:
- From your current location to Hammond
- From Oenaville to Hammond
- Williamson County
- The following are listed by their distance from Oenaville, with the one closest to Oenaville listed first.
- Schwertner
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Schwertner have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Schwertner
- Schwertner is located in Williamson County
- Jump to TripAdvisor's Tourism page for Schwertner <2>
- Friendship ‑ Historic
(29 miles [46.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Friendship. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Friendship
- Friendship is located in Williamson County
- Google driving directions:
- From your current location to Friendship
- From Oenaville to Friendship
- Laneport
(30 miles [48.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Laneport. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Laneport
- Laneport is located in Williamson County
- Google driving directions:
- From your current location to Laneport
- From Oenaville to Laneport
- Granger
(30 miles [48.3 km] to the southwest)
For an expanded list of the communities that are closest to Oenaville, see our County-by-County Page for Oenaville.
Cemeteries Near Oenaville ...
Below are cemeteries that are in the vicinity of Oenaville.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Oenaville covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Oenaville, with the one closest to Oenaville listed first.
- Theo Cemetery
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for the Theo Cemetery
- Note: The GPS coordinates that we are using for the Theo Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Belfalls Cemetery
(3 miles [4.8 km] to the northeast)
- Lancaster Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Lancaster Cemetery
- Note: The GPS coordinates that we are using for the Lancaster Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Little Flock Cemetery
(4 miles [6.4 km] to the southwest)
- Jena Cemetery
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for the Jena Cemetery
- Note: The GPS coordinates that we are using for the Jena Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Seaton Cemetery
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for the Seaton Cemetery
- Note: The GPS coordinates that we are using for the Seaton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Evergreen Cemetery
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for the Evergreen Cemetery
- Note: The GPS coordinates that we are using for the Evergreen Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Shiloh Cemetery
(6 miles [9.7 km] to the northwest)
- Jump to our Gazetteer entry for the Shiloh Cemetery
- Note: The GPS coordinates that we are using for the Shiloh Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- St. Marys Cemetery
(6 miles [9.7 km] to the east)
- Pleasant View Cemetery
(6 miles [9.7 km] to the northwest)
- Jump to our Gazetteer entry for the Pleasant View Cemetery
- Note: The GPS coordinates that we are using for the Pleasant View Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Mt. Zion Cemetery
(6 miles [9.7 km] to the northwest)
- Jump to our Gazetteer entry for the Mt. Zion Cemetery
- Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Hillcrest Cemetery
(6 miles [9.7 km] to the west)
- Continue List (251 more) ...
- Dyess Grove Cemetery
(7 miles [11.3 km] to the south)
- Dyess Cemetery
(7 miles [11.3 km] to the south)
- Barclay Cemetery
(7 miles [11.3 km] to the southeast)
- Jump to our Gazetteer entry for the Barclay Cemetery
- Note: The GPS coordinates that we are using for the Barclay Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>
The Rand McNally Atlas shows that Oenaville had a population of 176 people in 1895 with a post office and no railroad service.
These communities are listed based on their distance from Oenaville, with the one closest to Oenaville listed first.
- Belfalls
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Belfalls have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belfalls
- Belfalls is located in Bell County
- Seaton
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Seaton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seaton
- Seaton is located in Bell County
- Ocker
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Ocker. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ocker
- Ocker is located in Bell County
- Google driving directions:
- From your current location to Ocker
- From Oenaville to Ocker
- Westphalia
(6 miles [9.7 km] to the east)
- Blevins
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Blevins have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blevins
- Blevins is located in Falls County
- Troy
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Troy have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Troy
- Troy is located in Bell County
- Population from the 2020 Census: 2,191 people
- Jump to TripAdvisor's Tourism page for Troy <2>
- Temple
(7 miles [11.3 km] to the west)
- Barclay
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Barclay have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barclay
- Barclay is located in Falls County
- Durango
(7 miles [11.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Durango. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Durango
- Durango is located in Falls County
- Google driving directions:
- From your current location to Durango
- From Oenaville to Durango
- Heidenheimer
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Heidenheimer have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Heidenheimer
- Heidenheimer is located in Bell County
- Jump to TripAdvisor's Tourism page for Heidenheimer <2>
- Cyclone
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Cyclone. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cyclone
- Cyclone is located in Bell County
- Google driving directions:
- From your current location to Cyclone
- From Oenaville to Cyclone
- Pendleton
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Pendleton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pendleton
- Pendleton is located in Bell County
- Jump to TripAdvisor's Tourism page for Pendleton <2>
- Continue List (15 more) ...
- Eddy
(11 miles [17.7 km] to the north)
- Little River
(12 miles [19.3 km] to the southwest)
- Lott
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Lott have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lott
- Lott is located in Falls County
- Population from the 2020 Census: 744 people
- Jump to TripAdvisor's Tourism page for Lott <2>
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Oenaville. See our List of 1890's Communities around Oenaville.
Newspapers Published in Oenaville ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 65 newspapers that have been published in the area around Oenaville.
Although we're unaware of any newspapers that were published in the immediate area of Oenaville, there are papers which were published within 25 miles [40.2 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Oenaville.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Oenaville:
- Websites specific to Texas
- Pages specific to Bell County
- Genealogy information for nearby counties
- Coryell County
- Falls County
- McLennan County
- Milam County
- Robertson County
- Williamson County
- Cemetery Information and Directories for Texas
Off-the-Road Links ...
Unfortunately, we don't know of a website for Oenaville. If you can help, please contact us through our Feedback Page.
The official website for Bell County: www.bellcountytx.com/
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Oenaville) to Point B.Our distance measurements begin at a specific point in Oenaville. The point we use is located at these GPS coordinates - Latitude: 31.1264, Longitude: -97.2290 In this case, the coordinates for Oenaville have been provided by the Geographic Names Information System (GNIS). |
<6> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Oenaville, please let us know so that we can improve our accuracy. |