|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Lucille Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Lucille Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Lucille Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Palmer
(Less than 2 miles to the west)
- Crisp
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for Crisp
- Crisp is located in Ellis County
- Garrett
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Garrett have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garrett
- Garrett is located in Ellis County
- Population from the 2020 Census: 891 people
- Boyce
(6 miles [9.7 km] to the southwest)
- Jump to our Gazetteer entry for Boyce
- Boyce is located in Ellis County
- Ike
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for Ike
- Ike is located in Ellis County
- Ennis
(7 miles [11.3 km] to the south)
- Ferris
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Ferris have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ferris
- Ferris is located in Dallas County
- Population from the 2020 Census: 3,069 people
- Jump to TripAdvisor's Tourism page for Ferris <2>
- Walnut Springs
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Walnut Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walnut Springs
- Walnut Springs is located in Ellis County
- Pecan Hill
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Pecan Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pecan Hill
- Pecan Hill is located in Ellis County
- Population from the 2020 Census: 714 people
- Telico
(9 miles [14.5 km] to the southeast)
- Jump to our Gazetteer entry for Telico
- Telico is located in Ellis County
- Sterrett
(10 miles [16.1 km] to the west)
- Jump to our Gazetteer entry for Sterrett
- Sterrett is located in Ellis County
- Waxahachie
(11 miles [17.7 km] to the west)
- Bardwell
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Bardwell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bardwell
- Bardwell is located in Ellis County
- Population from the 2020 Census: 709 people
- Jump to TripAdvisor's Tourism page for Bardwell <2>
- Rosser
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Rosser have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rosser
- Rosser is located in Kaufman County
- Population from the 2020 Census: 422 people
- Jump to TripAdvisor's Tourism page for Rosser <2>
- Red Oak
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Red Oak have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Oak
- Red Oak is located in Ellis County
- Population from the 2020 Census: 14,098 people
- Jump to TripAdvisor's Tourism page for Red Oak <2>
- Wilmer
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Wilmer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilmer
- Wilmer is located in Dallas County
- Population from the 2020 Census: 5,444 people
- Jump to TripAdvisor's Tourism page for Wilmer <2>
- Howard
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for Howard
- Howard is located in Ellis County
- Alma
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Alma have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alma
- Alma is located in Ellis County
- Population from the 2020 Census: 400 people
- Oak Leaf
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Oak Leaf have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Leaf
- Oak Leaf is located in Ellis County
- Population from the 2020 Census: 1,498 people
- Combine
(13 miles [20.9 km] to the northeast)
- Jump to our Gazetteer entry for Combine
- Combine is located in Dallas County
- Population from the 2020 Census: 2,537 people
- Lancaster
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Lancaster have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lancaster
- Lancaster is located in Dallas County
- Population from the 2020 Census: 39,265 people
- Jump to TripAdvisor's Tourism page for Lancaster <2>
- Hutchins
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Hutchins have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hutchins
- Hutchins is located in Dallas County
- Population from the 2020 Census: 6,020 people
- Jump to TripAdvisor's Tourism page for Hutchins <2>
- Glenn Heights
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Glenn Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glenn Heights
- Glenn Heights is located in Dallas County
- Population from the 2020 Census: 14,333 people
- Jump to TripAdvisor's Tourism page for Glenn Heights <2>
- Sardis
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Sardis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sardis
- Sardis is located in Ellis County
- Nash
(15 miles [24.1 km] to the southwest)
- Jump to our Gazetteer entry for Nash
- Nash is located in Ellis County
- Rice
(15 miles [24.1 km] to the southeast)
- Cottonwood
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Cottonwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cottonwood
- Cottonwood is located in Kaufman County
- Population from the 2020 Census: 209 people
- Ovilla
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Ovilla have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ovilla
- Ovilla is located in Dallas County
- Population from the 2020 Census: 4,288 people
- Jump to TripAdvisor's Tourism page for Ovilla <2>
Off-the-Road Links ...
The official website for Ellis County: www.co.ellis.tx.us/ The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Lucille Cemetery. The point we use is located at these GPS coordinates - Latitude: 32.4363, Longitude: -96.6503 In this case, the coordinates for the Lucille Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|