RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Williamson County >> Andice >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





Nearest Communities to Andice,
Listed County-By-County

The purpose of this page is to identify those communities that are closest to Andice, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Andice:

We have great-grandparents who lived in a small community in the northwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.

Please note that when we give a distance, it's a 'straight-line' distance.<1>

If you're researching your genealogy, we hope that the following information helps.

Andice is located in Williamson County.

The following 6 counties adjoin and form the boundaries of Williamson County: Bastrop, Bell, Burnet, Lee, Milam & Travis.

Our Gazetteer shows that there are 140 communities within 40 miles [64.4 km]<1> of Andice. Of these communities, 99 are located in counties other than Williamson County.

We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.

After starting with the home county for Andice (which is Williamson County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Andice

For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.

  • Williamson County   (where Andice resides)
    • County Website:   www.wilco.org/
    • County Seat for Williamson:   Georgetown
    • Genealogy Websites   ...
    • Nearest Communities to Andice   ...
      • These communities are listed by their distance from Andice.
      • Greens Crossing
        (4 miles [6.4 km] to the northwest)
        • Note: The GPS coordinates that we are using for Greens Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Greens Crossing
        • Greens Crossing is located in Williamson County
      • Florence
        (5 miles [8 km] to the northeast)
        • Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Florence
        • Florence is located in Williamson County
        • Population from the 2020 Census: 1,304 people
        • Jump to TripAdvisor's Tourism page for Florence <4>
      • Hunt Crossing
        (6 miles [9.7 km] to the south)
        • Note: The GPS coordinates that we are using for Hunt Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Hunt Crossing
        • Hunt Crossing is located in Williamson County
      • Seward Junction
        (8 miles [12.9 km] to the south)
        • Note: The GPS coordinates that we are using for Seward Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Seward Junction
        • Seward Junction is located in Williamson County
      • Liberty Hill
        (8 miles [12.9 km] to the southwest)
        • Note: The GPS coordinates that we are using for Liberty Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Liberty Hill
        • Liberty Hill is located in Williamson County
        • Population from the 2020 Census: 3,549 people
        • Jump to TripAdvisor's Tourism page for Liberty Hill <4>
      • Russell Crossing
        (9 miles [14.5 km] to the southeast)
        • Note: The GPS coordinates that we are using for Russell Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Russell Crossing
        • Russell Crossing is located in Williamson County
      • Sun City
        (9 miles [14.5 km] to the southeast)
        • Note: The GPS coordinates that we are using for Sun City have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sun City
        • Sun City is located in Williamson County
      • Jinks Branch
        (10 miles [16.1 km] to the south)
        • Note: The GPS coordinates that we are using for Jinks Branch have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Jinks Branch
        • Jinks Branch is located in Williamson County
      • Serenada
        (11 miles [17.7 km] to the southeast)
        • Jump to our Gazetteer entry for Serenada
        • Serenada is located in Williamson County
      • Berrys Creek
        (12 miles [19.3 km] to the east)
        • Note: The GPS coordinates that we are using for Berrys Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Berrys Creek
        • Berrys Creek is located in Williamson County
      • North Georgetown
        (13 miles [20.9 km] to the southeast)
        • Note: The GPS coordinates that we are using for North Georgetown have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for North Georgetown
        • North Georgetown is located in Williamson County
      • Corn Hill
        (14 miles [22.5 km] to the east)
        • Note: The GPS coordinates that we are using for Corn Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Corn Hill
        • Corn Hill is located in Williamson County
      • Continue List   (29 more) ...
        • Jarrell
          (14 miles [22.5 km] to the east)
          • Note: The GPS coordinates that we are using for Jarrell have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Jarrell
          • Jarrell is located in Williamson County
          • Population from the 2020 Census: 2,077 people
          • Jump to TripAdvisor's Tourism page for Jarrell <4>
        • Leander
          (14 miles [22.5 km] to the south)
          • Note: The GPS coordinates that we are using for Leander have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Leander
          • Leander is located in Williamson County
          • Population from the 2020 Census: 70,519 people
          • Jump to TripAdvisor's Tourism page for Leander <4>
        • Georgetown
          (14 miles [22.5 km] to the southeast)
        • New Corn Hill
          (15 miles [24.1 km] to the east)
          • Note: The GPS coordinates that we are using for New Corn Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for New Corn Hill
          • New Corn Hill is located in Williamson County
        • Theon
          (15 miles [24.1 km] to the east)
          • Note: The GPS coordinates that we are using for Theon have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Theon
          • Theon is located in Williamson County
        • Walburg
          (16 miles [25.7 km] to the east)
          • Note: The GPS coordinates that we are using for Walburg have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Walburg
          • Walburg is located in Williamson County
          • Jump to TripAdvisor's Tourism page for Walburg <4>
        • Walkerton
          (17 miles [27.4 km] to the south)
          • Note: The GPS coordinates that we are using for Walkerton have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Walkerton
          • Walkerton is located in Williamson County
        • Weir
          (17 miles [27.4 km] to the southeast)
          • Note: The GPS coordinates that we are using for Weir have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Weir
          • Weir is located in Williamson County
          • Population from the 2020 Census: 549 people
          • Jump to TripAdvisor's Tourism page for Weir <4>
        • Cedar Park
          (18 miles [29 km] to the south)
          • Note: The GPS coordinates that we are using for Cedar Park have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Cedar Park
          • Cedar Park is located in Williamson County
          • Population from the 2020 Census: 81,040 people
          • Jump to TripAdvisor's Tourism page for Cedar Park <4>
        • White Stone
          (18 miles [29 km] to the south)
          • Note: The GPS coordinates that we are using for White Stone have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for White Stone
          • White Stone is located in Williamson County
        • Brushy Creek
          (19 miles [30.6 km] to the south)
          • Note: The GPS coordinates that we are using for Brushy Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Brushy Creek
          • Brushy Creek is located in Williamson County
        • Keelersville
          (20 miles [32.2 km] to the east)
          • Note: The GPS coordinates that we are using for Keelersville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Keelersville
          • Keelersville is located in Williamson County
        • Mozo
          (20 miles [32.2 km] to the east)
          • Note: The GPS coordinates that we are using for Mozo have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Mozo
          • Mozo is located in Williamson County
        • Schwertner
          (20 miles [32.2 km] to the east)
          • Note: The GPS coordinates that we are using for Schwertner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Schwertner
          • Schwertner is located in Williamson County
          • Jump to TripAdvisor's Tourism page for Schwertner <4>
        • Round Rock
          (20 miles [32.2 km] to the southeast)
        • Turkey Hollow
          (21 miles [33.8 km] to the south)
          • Note: The GPS coordinates that we are using for Turkey Hollow have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Turkey Hollow
          • Turkey Hollow is located in Williamson County
        • Jonah
          (21 miles [33.8 km] to the southeast)
          • Note: The GPS coordinates that we are using for Jonah have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Jonah
          • Jonah is located in Williamson County
        • Old Round Rock ‑ Historic
          (21 miles [33.8 km] to the southeast)
          • Note: The GPS coordinates that we are using for Old Round Rock have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Old Round Rock
          • Old Round Rock is located in Williamson County
        • Anderson Mill
          (22 miles [35.4 km] to the south)
          • Note: The GPS coordinates that we are using for Anderson Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Anderson Mill
          • Anderson Mill is located in Williamson County
        • Jollyville
          (23 miles [37 km] to the south)
          • Note: The GPS coordinates that we are using for Jollyville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Jollyville
          • Jollyville is located in Williamson County
        • Pond Springs
          (23 miles [37 km] to the south)
          • Note: The GPS coordinates that we are using for Pond Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Pond Springs
          • Pond Springs is located in Williamson County
        • Granger
          (24 miles [38.6 km] to the east)
        • Hutto
          (24 miles [38.6 km] to the southeast)
          • Note: The GPS coordinates that we are using for Hutto have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hutto
          • Hutto is located in Williamson County
          • Population from the 2020 Census: 29,987 people
          • Jump to TripAdvisor's Tourism page for Hutto <4>
        • Circleville
          (26 miles [41.8 km] to the east)
          • Note: The GPS coordinates that we are using for Circleville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Circleville
          • Circleville is located in Williamson County
        • Frame Switch
          (27 miles [43.5 km] to the southeast)
          • Note: The GPS coordinates that we are using for Frame Switch have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Frame Switch
          • Frame Switch is located in Williamson County
        • Waterloo
          (29 miles [46.7 km] to the east)
          • Note: The GPS coordinates that we are using for Waterloo have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Waterloo
          • Waterloo is located in Williamson County
        • Norman
          (29 miles [46.7 km] to the southeast)
          • Note: The GPS coordinates that we are using for Norman have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Norman
          • Norman is located in Williamson County
        • Normans Crossing
          (29 miles [46.7 km] to the southeast)
          • Note: The GPS coordinates that we are using for Normans Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Normans Crossing
          • Normans Crossing is located in Williamson County
        • Taylor
          (30 miles [48.3 km] to the southeast)
          • Jump to our Gazetteer entry for Taylor
          • Taylor is located in Williamson County
          • Population from the 2020 Census: 17,921 people
          • Jump to TripAdvisor's Tourism page for Taylor <4>
  • Bell County
    • County Website:   www.bellcountytx.com/
    • County Seat for Bell:   Belton
    • Genealogy Websites   ...
    • Nearest Communities to Andice   ...
      • These communities are listed by their distance from Andice.
      • Cedar Valley
        (13 miles [20.9 km] to the northeast)
        • Note: The GPS coordinates that we are using for Cedar Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Cedar Valley
        • Cedar Valley is located in Bell County
      • Ding Dong
        (14 miles [22.5 km] to the north)
        • Jump to our Gazetteer entry for Ding Dong
        • Ding Dong is located in Bell County
      • Maxdale ‑ Historic
        (14 miles [22.5 km] to the north)
        • Note: The GPS coordinates that we are using for Maxdale have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Maxdale
        • Maxdale is located in Bell County
      • Youngsport
        (14 miles [22.5 km] to the northeast)
        • Note: The GPS coordinates that we are using for Youngsport have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Youngsport
        • Youngsport is located in Bell County
      • Mountain View Estates
        (16 miles [25.7 km] to the north)
        • Note: The GPS coordinates that we are using for Mountain View Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Mountain View Estates
        • Mountain View Estates is located in Bell County
      • Prairie Dell
        (17 miles [27.4 km] to the northeast)
        • Note: The GPS coordinates that we are using for Prairie Dell have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Prairie Dell
        • Prairie Dell is located in Bell County
      • Union Grove
        (21 miles [33.8 km] to the northeast)
        • Note: The GPS coordinates that we are using for Union Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Union Grove
        • Union Grove is located in Bell County
      • Killeen
        (22 miles [35.4 km] to the north)
        • Note: The GPS coordinates that we are using for Killeen have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Killeen
        • Killeen is located in Bell County
        • Population from the 2020 Census: 153,991 people
        • Jump to TripAdvisor's Tourism page for Killeen <4>
      • Harker Heights
        (22 miles [35.4 km] to the northeast)
        • Note: The GPS coordinates that we are using for Harker Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Harker Heights
        • Harker Heights is located in Bell County
        • Population from the 2020 Census: 33,071 people
        • Jump to TripAdvisor's Tourism page for Harker Heights <4>
      • Salado
        (22 miles [35.4 km] to the northeast)
      • Copperas Cove
        (23 miles [37 km] to the north)
        • Note: The GPS coordinates that we are using for Copperas Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Copperas Cove
        • Copperas Cove is located in Bell County
        • Population from the 2020 Census: 33,498 people
        • Jump to TripAdvisor's Tourism page for Copperas Cove <4>
      • Lone Star
        (23 miles [37 km] to the north)
        • Note: The GPS coordinates that we are using for Lone Star have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lone Star
        • Lone Star is located in Bell County
      • Continue List   (16 more) ...
        • Bartlett
          (24 miles [38.6 km] to the east)
          • Note: The GPS coordinates that we are using for Bartlett have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bartlett
          • Bartlett is located in Bell County
          • Population from the 2020 Census: 1,766 people
          • Jump to TripAdvisor's Tourism page for Bartlett <4>
        • Chaffee Village
          (24 miles [38.6 km] to the north)
          • Note: The GPS coordinates that we are using for Chaffee Village have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Chaffee Village
          • Chaffee Village is located in Bell County
        • Fort Hood
          (24 miles [38.6 km] to the north)
        • McNair Village
          (24 miles [38.6 km] to the north)
          • Note: The GPS coordinates that we are using for McNair Village have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for McNair Village
          • McNair Village is located in Bell County
        • Walker Village
          (25 miles [40.2 km] to the north)
          • Note: The GPS coordinates that we are using for Walker Village have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Walker Village
          • Walker Village is located in Bell County
        • Nolanville
          (25 miles [40.2 km] to the northeast)
        • Holland
          (27 miles [43.5 km] to the east)
        • Dog Ridge ‑ Historic
          (27 miles [43.5 km] to the northeast)
          • Note: The GPS coordinates that we are using for Dog Ridge have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Dog Ridge
          • Dog Ridge is located in Bell County
        • Childers Mill ‑ Historic
          (28 miles [45.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for Childers Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Childers Mill
          • Childers Mill is located in Bell County
        • Sommers Mill
          (28 miles [45.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for Sommers Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Sommers Mill
          • Sommers Mill is located in Bell County
        • Belton
          (29 miles [46.7 km] to the northeast)
        • Donahoe
          (30 miles [48.3 km] to the east)
          • Note: The GPS coordinates that we are using for Donahoe have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Donahoe
          • Donahoe is located in Bell County
        • Sparks
          (30 miles [48.3 km] to the east)
          • Jump to our Gazetteer entry for Sparks
          • Sparks is located in Bell County
        • Brookhaven
          (30 miles [48.3 km] to the northeast)
          • Note: The GPS coordinates that we are using for Brookhaven have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Brookhaven
          • Brookhaven is located in Bell County
        • Hobbs
          (30 miles [48.3 km] to the northeast)
          • Note: The GPS coordinates that we are using for Hobbs have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hobbs
          • Hobbs is located in Bell County
        • Westcliff
          (30 miles [48.3 km] to the northeast)
          • Note: The GPS coordinates that we are using for Westcliff have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Westcliff
          • Westcliff is located in Bell County
  • Burnet County
    • County Seat for Burnet:   Burnet
    • Genealogy Websites   ...
    • Nearest Communities to Andice   ...
      • These communities are listed by their distance from Andice.
      • Mahomet
        (5 miles [8 km] to the northwest)
        • Note: The GPS coordinates that we are using for Mahomet have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Mahomet
        • Mahomet is located in Burnet County
      • Briggs
        (8 miles [12.9 km] to the northwest)
        • Note: The GPS coordinates that we are using for Briggs have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Briggs
        • Briggs is located in Burnet County
        • Jump to TripAdvisor's Tourism page for Briggs <4>
      • Joppa
        (11 miles [17.7 km] to the west)
        • Note: The GPS coordinates that we are using for Joppa have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Joppa
        • Joppa is located in Burnet County
      • Bertram
        (12 miles [19.3 km] to the west)
        • Note: The GPS coordinates that we are using for Bertram have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Bertram
        • Bertram is located in Burnet County
        • Population from the 2020 Census: 1,520 people
        • Jump to TripAdvisor's Tourism page for Bertram <4>
      • Shady Grove
        (13 miles [20.9 km] to the west)
        • Note: The GPS coordinates that we are using for Shady Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Shady Grove
        • Shady Grove is located in Burnet County
      • Oakalla
        (14 miles [22.5 km] to the north)
        • Note: The GPS coordinates that we are using for Oakalla have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Oakalla
        • Oakalla is located in Burnet County
      • Watson
        (14 miles [22.5 km] to the northwest)
        • Note: The GPS coordinates that we are using for Watson have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Watson
        • Watson is located in Burnet County
      • Oatmeal
        (15 miles [24.1 km] to the southwest)
      • Sunnylane
        (19 miles [30.6 km] to the northwest)
        • Note: The GPS coordinates that we are using for Sunnylane have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sunnylane
        • Sunnylane is located in Burnet County
      • Lake Victor
        (22 miles [35.4 km] to the northwest)
        • Note: The GPS coordinates that we are using for Lake Victor have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lake Victor
        • Lake Victor is located in Burnet County
      • Burnet
        (22 miles [35.4 km] to the west)
      • Gandy
        (22 miles [35.4 km] to the west)
        • Note: The GPS coordinates that we are using for Gandy have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Gandy
        • Gandy is located in Burnet County
      • Continue List   (8 more) ...
        • Smithwick
          (23 miles [37 km] to the southwest)
          • Note: The GPS coordinates that we are using for Smithwick have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Smithwick
          • Smithwick is located in Burnet County
        • Mormon Mill ‑ Historic
          (24 miles [38.6 km] to the southwest)
          • Jump to our Gazetteer entry for Mormon Mill
          • Mormon Mill is located in Burnet County
          • Mormon Mill has also been known as:
          • Mormon Colony
        • Sudduth
          (25 miles [40.2 km] to the west)
          • Note: The GPS coordinates that we are using for Sudduth have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Sudduth
          • Sudduth is located in Burnet County
        • Spicewood
          (27 miles [43.5 km] to the southwest)
          • Note: The GPS coordinates that we are using for Spicewood have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Spicewood
          • Spicewood is located in Burnet County
          • Jump to TripAdvisor's Tourism page for Spicewood <4>
        • Fairland
          (27 miles [43.5 km] to the west)
          • Note: The GPS coordinates that we are using for Fairland have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Fairland
          • Fairland is located in Burnet County
        • Marble Falls
          (28 miles [45.1 km] to the southwest)
        • Scobee
          (29 miles [46.7 km] to the west)
          • Note: The GPS coordinates that we are using for Scobee have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Scobee
          • Scobee is located in Burnet County
        • Meadowlakes
          (30 miles [48.3 km] to the southwest)
          • Note: The GPS coordinates that we are using for Meadowlakes have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Meadowlakes
          • Meadowlakes is located in Burnet County
          • Population from the 2020 Census: 1,733 people
  • Coryell County
    • County Seat for Coryell:   Gatesville
    • Genealogy Websites   ...
    • Nearest Communities to Andice   ...
      • These communities are listed by their distance from Andice.
      • Kay Bee Heights
        (23 miles [37 km] to the north)
        • Note: The GPS coordinates that we are using for Kay Bee Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Kay Bee Heights
        • Kay Bee Heights is located in Coryell County
      • Montague Village
        (23 miles [37 km] to the north)
        • Note: The GPS coordinates that we are using for Montague Village have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Montague Village
        • Montague Village is located in Coryell County
      • Comanche Village I
        (24 miles [38.6 km] to the north)
        • Note: The GPS coordinates that we are using for Comanche Village I have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Comanche Village I
        • Comanche Village I is located in Coryell County
      • Comanche Village II
        (24 miles [38.6 km] to the north)
        • Note: The GPS coordinates that we are using for Comanche Village II have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Comanche Village II
        • Comanche Village II is located in Coryell County
      • Comanche Village III
        (24 miles [38.6 km] to the north)
        • Note: The GPS coordinates that we are using for Comanche Village III have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Comanche Village III
        • Comanche Village III is located in Coryell County
      • House Crossing
        (27 miles [43.5 km] to the north)
        • Note: The GPS coordinates that we are using for House Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for House Crossing
        • House Crossing is located in Coryell County
      • Mason Crossing ‑ Historic
        (30 miles [48.3 km] to the north)
        • Note: The GPS coordinates that we are using for Mason Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Mason Crossing
        • Mason Crossing is located in Coryell County
      • Middle Crossing
        (30 miles [48.3 km] to the north)
        • Note: The GPS coordinates that we are using for Middle Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Middle Crossing
        • Middle Crossing is located in Coryell County
      • Saint Elijah Village
        (30 miles [48.3 km] to the north)
        • Note: The GPS coordinates that we are using for Saint Elijah Village have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Saint Elijah Village
        • Saint Elijah Village is located in Coryell County
  • Lampasas County
    • County Seat for Lampasas:   Lampasas
    • Genealogy Websites   ...
    • Nearest Communities to Andice   ...
      • These communities are listed by their distance from Andice.
      • Kempner
        (21 miles [33.8 km] to the north)
        • Note: The GPS coordinates that we are using for Kempner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Kempner
        • Kempner is located in Lampasas County
        • Population from the 2020 Census: 1,160 people
        • Jump to TripAdvisor's Tourism page for Kempner <4>
      • Hallmark Crossing
        (24 miles [38.6 km] to the northwest)
        • Note: The GPS coordinates that we are using for Hallmark Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Hallmark Crossing
        • Hallmark Crossing is located in Lampasas County
      • Shortall
        (24 miles [38.6 km] to the northwest)
        • Note: The GPS coordinates that we are using for Shortall have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Shortall
        • Shortall is located in Lampasas County
      • Brooks Crossing
        (25 miles [40.2 km] to the northwest)
        • Note: The GPS coordinates that we are using for Brooks Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Brooks Crossing
        • Brooks Crossing is located in Lampasas County
      • Sparks Crossing ‑ Historic
        (26 miles [41.8 km] to the northwest)
        • Note: The GPS coordinates that we are using for Sparks Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sparks Crossing
        • Sparks Crossing is located in Lampasas County
      • Lampasas
        (27 miles [43.5 km] to the northwest)
      • Radio Junction
        (27 miles [43.5 km] to the northwest)
        • Note: The GPS coordinates that we are using for Radio Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Radio Junction
        • Radio Junction is located in Lampasas County
      • Rumley
        (29 miles [46.7 km] to the northwest)
        • Note: The GPS coordinates that we are using for Rumley have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Rumley
        • Rumley is located in Lampasas County
  • Travis County
    • County Website:   www.co.travis.tx.us/
    • County Seat for Travis:   Austin
    • Genealogy Websites   ...
    • Nearest Communities to Andice   ...
      • These communities are listed by their distance from Andice.
      • Round Mountain
        (15 miles [24.1 km] to the south)
        • Note: The GPS coordinates that we are using for Round Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Round Mountain
        • Round Mountain is located in Travis County
      • Nameless ‑ Historic
        (18 miles [29 km] to the south)
        • Jump to our Gazetteer entry for Nameless
        • Nameless is located in Travis County
        • Nameless has also been known as:
        • Cross Creek
        • Fairview
      • Jonestown
        (21 miles [33.8 km] to the south)
        • Note: The GPS coordinates that we are using for Jonestown have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Jonestown
        • Jonestown is located in Travis County
        • Population from the 2020 Census: 2,169 people
        • Jump to TripAdvisor's Tourism page for Jonestown <4>
      • South Jonestown Hills
        (22 miles [35.4 km] to the south)
        • Note: The GPS coordinates that we are using for South Jonestown Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for South Jonestown Hills
        • South Jonestown Hills is located in Travis County
      • Lago Vista
        (23 miles [37 km] to the south)
      • Volente
        (23 miles [37 km] to the south)
        • Note: The GPS coordinates that we are using for Volente have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Volente
        • Volente is located in Travis County
        • Population from the 2020 Census: 589 people
        • Jump to TripAdvisor's Tourism page for Volente <4>
      • McNeil
        (24 miles [38.6 km] to the south)
        • Note: The GPS coordinates that we are using for McNeil have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for McNeil
        • McNeil is located in Travis County
      • Merrelltown
        (24 miles [38.6 km] to the southeast)
        • Note: The GPS coordinates that we are using for Merrelltown have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Merrelltown
        • Merrelltown is located in Travis County
      • Hudson Bend
        (25 miles [40.2 km] to the south)
        • Note: The GPS coordinates that we are using for Hudson Bend have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Hudson Bend
        • Hudson Bend is located in Travis County
      • Kings Village
        (25 miles [40.2 km] to the southeast)
        • Note: The GPS coordinates that we are using for Kings Village have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Kings Village
        • Kings Village is located in Travis County
      • Three Points
        (25 miles [40.2 km] to the southeast)
        • Jump to our Gazetteer entry for Three Points
        • Three Points is located in Travis County
      • Ward Spring
        (25 miles [40.2 km] to the southeast)
        • Note: The GPS coordinates that we are using for Ward Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Ward Spring
        • Ward Spring is located in Travis County
      • Continue List   (22 more) ...
        • Wells Branch
          (25 miles [40.2 km] to the southeast)
          • Note: The GPS coordinates that we are using for Wells Branch have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Wells Branch
          • Wells Branch is located in Travis County
        • Windemere
          (25 miles [40.2 km] to the southeast)
          • Note: The GPS coordinates that we are using for Windemere have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Windemere
          • Windemere is located in Travis County
        • Four Points
          (26 miles [41.8 km] to the south)
          • Note: The GPS coordinates that we are using for Four Points have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Four Points
          • Four Points is located in Travis County
        • North Shore Acres
          (26 miles [41.8 km] to the south)
          • Note: The GPS coordinates that we are using for North Shore Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Shore Acres
          • North Shore Acres is located in Travis County
        • Waters Park
          (26 miles [41.8 km] to the south)
          • Note: The GPS coordinates that we are using for Waters Park have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Waters Park
          • Waters Park is located in Travis County
        • Idyle Hour Acres
          (26 miles [41.8 km] to the southeast)
          • Note: The GPS coordinates that we are using for Idyle Hour Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Idyle Hour Acres
          • Idyle Hour Acres is located in Travis County
        • Pflugerville
          (26 miles [41.8 km] to the southeast)
          • Note: The GPS coordinates that we are using for Pflugerville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Pflugerville
          • Pflugerville is located in Travis County
          • Population from the 2020 Census: 66,826 people
          • Jump to TripAdvisor's Tourism page for Pflugerville <4>
        • Edgewater Beach
          (27 miles [43.5 km] to the south)
          • Note: The GPS coordinates that we are using for Edgewater Beach have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Edgewater Beach
          • Edgewater Beach is located in Travis County
        • Marshall Ford
          (27 miles [43.5 km] to the south)
          • Note: The GPS coordinates that we are using for Marshall Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Marshall Ford
          • Marshall Ford is located in Travis County
        • Dessau Fountains
          (27 miles [43.5 km] to the southeast)
          • Note: The GPS coordinates that we are using for Dessau Fountains have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Dessau Fountains
          • Dessau Fountains is located in Travis County
        • Buffalo Gap
          (28 miles [45.1 km] to the south)
        • Coxville
          (28 miles [45.1 km] to the south)
          • Note: The GPS coordinates that we are using for Coxville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Coxville
          • Coxville is located in Travis County
        • Briarcliff
          (28 miles [45.1 km] to the southwest)
        • Eubank Acres
          (29 miles [46.7 km] to the south)
          • Note: The GPS coordinates that we are using for Eubank Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Eubank Acres
          • Eubank Acres is located in Travis County
        • Point Venture
          (29 miles [46.7 km] to the south)
          • Note: The GPS coordinates that we are using for Point Venture have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Point Venture
          • Point Venture is located in Travis County
          • Population from the 2020 Census: 1,053 people
          • Point Venture has also been known as:
          • Point Venture village
          • Jump to TripAdvisor's Tourism page for Point Venture <4>
        • Walnut Forest
          (29 miles [46.7 km] to the south)
          • Note: The GPS coordinates that we are using for Walnut Forest have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Walnut Forest
          • Walnut Forest is located in Travis County
        • Dessau
          (29 miles [46.7 km] to the southeast)
          • Note: The GPS coordinates that we are using for Dessau have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Dessau
          • Dessau is located in Travis County
        • Greenshores
          (30 miles [48.3 km] to the south)
          • Note: The GPS coordinates that we are using for Greenshores have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Greenshores
          • Greenshores is located in Travis County
        • Lakeway
          (30 miles [48.3 km] to the south)
          • Note: The GPS coordinates that we are using for Lakeway have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Lakeway
          • Lakeway is located in Travis County
          • Population from the 2020 Census: 16,216 people
          • Jump to TripAdvisor's Tourism page for Lakeway <4>
        • River Hills
          (30 miles [48.3 km] to the south)
          • Note: The GPS coordinates that we are using for River Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for River Hills
          • River Hills is located in Travis County
        • Villa Siesta Retirement Village
          (30 miles [48.3 km] to the south)
          • Note: The GPS coordinates that we are using for Villa Siesta Retirement Village have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Villa Siesta Retirement Village
          • Villa Siesta Retirement Village is located in Travis County
        • Cele
          (30 miles [48.3 km] to the southeast)
          • Jump to our Gazetteer entry for Cele
          • Cele is located in Travis County

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Andice) to Point B.Our distance measurements begin at a specific point in Andice. The point we use is located at these GPS coordinates - Latitude: 30.7824, Longitude: -97.8525    
<2>Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.

We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.

Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024