Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Allmon in the Atlas, the following communities of the 1890's would have been found near the current location of Allmon. The following communities are listed based on their distance, with the one closest to Allmon listed first.
- Estacado ‑ Historic
(9 miles [14.5 km] to the south)- Jump to our Gazetteer entry for Estacado
- Estacado is located in Crosby County
- Cone
(9 miles [14.5 km] to the southeast)- Jump to our Gazetteer entry for Cone
- Cone is located in Crosby County
- Jump to TripAdvisor's Tourism page for Cone <2>
- Floydada
(12 miles [19.3 km] to the northeast)- Note: The GPS coordinates that we are using for Floydada have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Floydada
- Floydada is located in Floyd County
- Population from the 2020 Census: 2,654 people
- Jump to TripAdvisor's Tourism page for Floydada <2>
- Della Plain ‑ Historic
(16 miles [25.7 km] to the northeast)- Note: We haven't been able to verify our GPS coordinates for Della Plain. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Della Plain
- Della Plain is located in Floyd County
- Lockney
(17 miles [27.4 km] to the north)- Note: The GPS coordinates that we are using for Lockney have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lockney
- Lockney is located in Floyd County
- Population from the 2020 Census: 1,619 people
- Jump to TripAdvisor's Tourism page for Lockney <2>
- Mount Blanco ‑ Historic
(18 miles [29 km] to the east)- Jump to our Gazetteer entry for Mount Blanco
- Mount Blanco is located in Crosby County
- Plainview
(24 miles [38.6 km] to the northwest)- Jump to our Gazetteer entry for Plainview
- Plainview is located in Hale County
- Population from the 2020 Census: 19,670 people
- Jump to TripAdvisor's Tourism page for Plainview <2>
- Hale City ‑ Historic
(25 miles [40.2 km] to the northwest) - Lubbock
(29 miles [46.7 km] to the southwest)- Jump to our Gazetteer entry for Lubbock
- Lubbock is located in Lubbock County
- Population from the 2020 Census: 262,611 people
- Jump to TripAdvisor's Tourism page for Lubbock <2>
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Allmon, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |