|
Nearest Communities to Rural Vale,
Listed County-By-County
The purpose of this page is to identify those communities that are closest to Rural Vale, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Rural Vale:
We have great-grandparents who lived in a small community in the southwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Please note that when we give a distance, it's a 'straight-line' distance starting from Rural Vale.<1>
If you're researching your genealogy, we hope that the following information helps.
Rural Vale is located in Monroe County.
The following 6 counties adjoin and form the boundaries of Monroe County: Cherokee (NC), Graham (NC), Blount, Loudon, McMinn & Polk.
Our Gazetteer shows that there are 487 communities within 40 miles [64.4 km]<1> of Rural Vale. Of these communities, 399 are located in counties other than Monroe County.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Rural Vale (which is Monroe County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Rural Vale
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Monroe County (where Rural Vale resides)
- County Website: https://monroetn.gov/
- County Seat for Monroe: Madisonville
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- Conasauga Mill
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Conasauga Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Conasauga Mill
- Conasauga Mill is located in Monroe County
- Jalapa
(2 miles [3.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Jalapa. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Jalapa
- Jalapa is located in Monroe County
- Google driving directions:
- From your current location to Jalapa
- From Rural Vale to Jalapa
- Holly Springs
(2 miles [3.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Holly Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holly Springs
- Holly Springs is located in Monroe County
- Epperson
(3 miles [4.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Epperson. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Epperson
- Epperson is located in Monroe County
- Google driving directions:
- From your current location to Epperson
- From Rural Vale to Epperson
- Sandy Lane
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Sandy Lane have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sandy Lane
- Sandy Lane is located in Monroe County
- Mount Harmony
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Mount Harmony have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Harmony
- Mount Harmony is located in Monroe County
- Towee Falls ‑ Historic
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Towee Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Towee Falls
- Towee Falls is located in Monroe County
- Bullet Creek
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Bullet Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bullet Creek
- Bullet Creek is located in Monroe County
- Ivy
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Ivy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ivy
- Ivy is located in Monroe County
- Ebenezer
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Ebenezer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ebenezer
- Ebenezer is located in Monroe County
- Ellis Mill
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Ellis Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellis Mill
- Ellis Mill is located in Monroe County
- Jacktown
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Jacktown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jacktown
- Jacktown is located in Monroe County
- Estimated population in 2014: 67,319 people
- Continue List (76 more) ...
- Tellico Plains
(5 miles [8 km] to the northeast)
- Cataska
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Cataska have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cataska
- Cataska is located in Monroe County
- Ironsburg
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Ironsburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ironsburg
- Ironsburg is located in Monroe County
- Coker Creek
(5 miles [8 km] to the southeast)
- Smithfield
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Smithfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smithfield
- Smithfield is located in Monroe County
- Mount Vernon
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Mount Vernon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Vernon
- Mount Vernon is located in Monroe County
- Tellico Beach
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Tellico Beach have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tellico Beach
- Tellico Beach is located in Monroe County
- Arden
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Arden have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arden
- Arden is located in Monroe County
- Bethlehem
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Bethlehem have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethlehem
- Bethlehem is located in Monroe County
- Sink ‑ Historic
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Sink have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sink
- Sink is located in Monroe County
- Stakely Mill
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Stakely Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stakely Mill
- Stakely Mill is located in Monroe County
- Belltown Mill
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Belltown Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belltown Mill
- Belltown Mill is located in Monroe County
- Nars Ford
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Nars Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nars Ford
- Nars Ford is located in Monroe County
- Waucheesi
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Waucheesi have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waucheesi
- Waucheesi is located in Monroe County
- Ho ‑ Historic
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Ho have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ho
- Ho is located in Monroe County
- Notchy Creek
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Notchy Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Notchy Creek
- Notchy Creek is located in Monroe County
- Belltown
(10 miles [16.1 km] to the northeast)
- Big Creek
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Big Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Big Creek
- Big Creek is located in Monroe County
- Chestuee
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Chestuee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chestuee
- Chestuee is located in Monroe County
- Gudger
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Gudger have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gudger
- Gudger is located in Monroe County
- Rafter
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Rafter have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rafter
- Rafter is located in Monroe County
- Rocky Spring
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Rocky Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rocky Spring
- Rocky Spring is located in Monroe County
- Sequoyah Estates
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Sequoyah Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sequoyah Estates
- Sequoyah Estates is located in Monroe County
- Sherril Heights
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Sherril Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sherril Heights
- Sherril Heights is located in Monroe County
- Tevis
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Tevis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tevis
- Tevis is located in Monroe County
- Acorn
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Acorn. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Acorn
- Acorn is located in Monroe County
- Google driving directions:
- From your current location to Acorn
- From Rural Vale to Acorn
- Ballplay
(13 miles [20.9 km] to the northeast)
- Chestnut Valley
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Chestnut Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chestnut Valley
- Chestnut Valley is located in Monroe County
- Madisonville
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Madisonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Madisonville
- Madisonville is located in Monroe County
- Population from the 2020 Census: 5,024 people
- Jump to TripAdvisor's Tourism page for Madisonville <5>
- Hopewell Mill
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Hopewell Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hopewell Mill
- Hopewell Mill is located in Monroe County
- Hopewell Springs
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Hopewell Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hopewell Springs
- Hopewell Springs is located in Monroe County
- Tariffville
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Tariffville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tariffville
- Tariffville is located in Monroe County
- Christianburg
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Christianburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Christianburg
- Christianburg is located in Monroe County
- Fagin
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Fagin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fagin
- Fagin is located in Monroe County
- Riverside
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Riverside have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverside
- Riverside is located in Monroe County
- Three Points
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Three Points have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Three Points
- Three Points is located in Monroe County
- Jeffrey ‑ Historic
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Jeffrey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jeffrey
- Jeffrey is located in Monroe County
- Hiwassee College
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Hiwassee College have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hiwassee College
- Hiwassee College is located in Monroe County
- Phillips
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Phillips have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Phillips
- Phillips is located in Monroe County
- Mount Zion
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Mount Zion have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Zion
- Mount Zion is located in Monroe County
- Kincaid
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Kincaid have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kincaid
- Kincaid is located in Monroe County
- Oak Grove
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Oak Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Grove
- Oak Grove is located in Monroe County
- Rockville
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Rockville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockville
- Rockville is located in Monroe County
- Wood
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Wood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wood
- Wood is located in Monroe County
- Toqua ‑ Historic
(19 miles [30.6 km] to the northeast)
- East Sweetwater
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for East Sweetwater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Sweetwater
- East Sweetwater is located in Monroe County
- Fourmile Bridge ‑ Historic
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Fourmile Bridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fourmile Bridge
- Fourmile Bridge is located in Monroe County
- Sweetwater
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Sweetwater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sweetwater
- Sweetwater is located in Monroe County
- Population from the 2020 Census: 5,956 people
- Jump to TripAdvisor's Tourism page for Sweetwater <5>
- Vonore
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Vonore have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vonore
- Vonore is located in Monroe County
- Population from the 2020 Census: 1,580 people
- Jump to TripAdvisor's Tourism page for Vonore <5>
- Howard
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Howard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howard
- Howard is located in Monroe County
- Tennessee ‑ Historic
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Tennessee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tennessee
- Tennessee is located in Monroe County
- Tommotley ‑ Historic
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Tommotley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tommotley
- Tommotley is located in Monroe County
- Tomotla Ford
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Tomotla Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tomotla Ford
- Tomotla Ford is located in Monroe County
- Brakebill ‑ Historic
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Brakebill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brakebill
- Brakebill is located in Monroe County
- Lakeside
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Lakeside have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeside
- Lakeside is located in Monroe County
- Little River ‑ Historic
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Little River have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little River
- Little River is located in Monroe County
- Niles Ferry
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Niles Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Niles Ferry
- Niles Ferry is located in Monroe County
- Chota ‑ Historic
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Chota have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chota
- Chota is located in Monroe County
- Citico Beach
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Citico Beach have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Citico Beach
- Citico Beach is located in Monroe County
- Fort Loudon
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Fort Loudon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Loudon
- Fort Loudon is located in Monroe County
- Halfway Town ‑ Historic
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Halfway Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Halfway Town
- Halfway Town is located in Monroe County
- Mountainville ‑ Historic
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Mountainville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mountainville
- Mountainville is located in Monroe County
- Tuskeegee ‑ Historic
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Tuskeegee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tuskeegee
- Tuskeegee is located in Monroe County
- Estimated population in 2014: 2,663 people
- Fairlane
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Fairlane have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairlane
- Fairlane is located in Monroe County
- Halls Ferry
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Halls Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Halls Ferry
- Halls Ferry is located in Monroe County
- McGhee
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for McGhee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McGhee
- McGhee is located in Monroe County
- Mialoquo ‑ Historic
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Mialoquo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mialoquo
- Mialoquo is located in Monroe County
- Northpoint
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Northpoint have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Northpoint
- Northpoint is located in Monroe County
- Caringer ‑ Historic
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Caringer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caringer
- Caringer is located in Monroe County
- Citico ‑ Historic
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Citico have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Citico
- Citico is located in Monroe County
- Jones Ferry
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Jones Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jones Ferry
- Jones Ferry is located in Monroe County
- Eve Mills
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Eve Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eve Mills
- Eve Mills is located in Monroe County
- Macedonia
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Macedonia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Macedonia
- Macedonia is located in Monroe County
- Old Sweetwater
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Old Sweetwater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Sweetwater
- Old Sweetwater is located in Monroe County
- Ipe ‑ Historic
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Ipe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ipe
- Ipe is located in Monroe County
- Chilhowey ‑ Historic
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Chilhowey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chilhowey
- Chilhowey is located in Monroe County
- Blount County
- County Website: https://www.blounttn.gov/
- County Seat for Blount: Maryville
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- Shaddon Mill
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Shaddon Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shaddon Mill
- Shaddon Mill is located in Blount County
- Tallassee
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Tallassee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tallassee
- Tallassee is located in Blount County
- Jump to TripAdvisor's Tourism page for Tallassee <5>
- Union Grove
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Union Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Grove
- Union Grove is located in Blount County
- Calderwood
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Calderwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calderwood
- Calderwood is located in Blount County
- Tellassee ‑ Historic
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Tellassee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tellassee
- Tellassee is located in Blount County
- Allegheny Springs ‑ Historic
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Allegheny Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Allegheny Springs
- Allegheny Springs is located in Blount County
- Chilhowee
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Chilhowee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chilhowee
- Chilhowee is located in Blount County
- Wellsville
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Wellsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wellsville
- Wellsville is located in Blount County
- Wilham ‑ Historic
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Wilham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilham
- Wilham is located in Blount County
- Lanier
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Lanier have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lanier
- Lanier is located in Blount County
- Brick Mill
(27 miles [43.5 km] to the northeast)
- Chota
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Chota have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chota
- Chota is located in Blount County
- Continue List (7 more) ...
- McMullens
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for McMullens have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McMullens
- McMullens is located in Blount County
- Estimated population in 2014: 13,620 people
- Cloyd Creek ‑ Historic
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Cloyd Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cloyd Creek
- Cloyd Creek is located in Blount County
- Mint
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Mint have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mint
- Mint is located in Blount County
- Christie Hill
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Christie Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Christie Hill
- Christie Hill is located in Blount County
- Happy Valley
(30 miles [48.3 km] to the northeast)
- Marble Hill
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Marble Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marble Hill
- Marble Hill is located in Blount County
- Springview
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Springview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springview
- Springview is located in Blount County
- Bradley County
- County Website: https://bradleycountytn.gov/
- County Seat for Bradley: Cleveland
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- Cooks Ferry
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Cooks Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cooks Ferry
- Cooks Ferry is located in Bradley County
- River Bend Estates
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for River Bend Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for River Bend Estates
- River Bend Estates is located in Bradley County
- Charleston
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Charleston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Charleston
- Charleston is located in Bradley County
- Population from the 2020 Census: 706 people
- Jump to TripAdvisor's Tourism page for Charleston <5>
- Walkers Ferry
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Walkers Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walkers Ferry
- Walkers Ferry is located in Bradley County
- Climer
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Climer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Climer
- Climer is located in Bradley County
- Heritage Hills
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Heritage Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Heritage Hills
- Heritage Hills is located in Bradley County
- Bellefounte
(24 miles [38.6 km] to the west)
- Carriage Hills
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Carriage Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carriage Hills
- Carriage Hills is located in Bradley County
- Wilson Heights
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Wilson Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilson Heights
- Wilson Heights is located in Bradley County
- Colonial Estates
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Colonial Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colonial Estates
- Colonial Estates is located in Bradley County
- Hickory Hills
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Hickory Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hickory Hills
- Hickory Hills is located in Bradley County
- Monte Carlo Estates
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Monte Carlo Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monte Carlo Estates
- Monte Carlo Estates is located in Bradley County
- Continue List (52 more) ...
- Tasso
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Tasso have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tasso
- Tasso is located in Bradley County
- American Heritage
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for American Heritage have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for American Heritage
- American Heritage is located in Bradley County
- Chestuee
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Chestuee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chestuee
- Chestuee is located in Bradley County
- Arrowhead Point
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Arrowhead Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arrowhead Point
- Arrowhead Point is located in Bradley County
- Fairview
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Bradley County
- Homestead Acres
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Homestead Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Homestead Acres
- Homestead Acres is located in Bradley County
- Johnston Circle
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Johnston Circle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johnston Circle
- Johnston Circle is located in Bradley County
- Marina Hills
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Marina Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marina Hills
- Marina Hills is located in Bradley County
- North Club Estates
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for North Club Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Club Estates
- North Club Estates is located in Bradley County
- Oakwood
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Oakwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakwood
- Oakwood is located in Bradley County
- Raht Ferry
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Raht Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raht Ferry
- Raht Ferry is located in Bradley County
- Rolling Brook
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Rolling Brook have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rolling Brook
- Rolling Brook is located in Bradley County
- Royal Oak
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Royal Oak have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Royal Oak
- Royal Oak is located in Bradley County
- Tasso Heights
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Tasso Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tasso Heights
- Tasso Heights is located in Bradley County
- Whisperwood
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Whisperwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whisperwood
- Whisperwood is located in Bradley County
- Taylor
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Taylor have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylor
- Taylor is located in Bradley County
- Foxfire
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Foxfire have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Foxfire
- Foxfire is located in Bradley County
- Hill Acres
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Hill Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hill Acres
- Hill Acres is located in Bradley County
- Hooper Acres
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Hooper Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hooper Acres
- Hooper Acres is located in Bradley County
- Kingwood Estates
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Kingwood Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingwood Estates
- Kingwood Estates is located in Bradley County
- Mapleton Hills
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Mapleton Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mapleton Hills
- Mapleton Hills is located in Bradley County
- Peach Orchard
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Peach Orchard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peach Orchard
- Peach Orchard is located in Bradley County
- Nantahala Estates
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Nantahala Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nantahala Estates
- Nantahala Estates is located in Bradley County
- Union Grove
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Union Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Grove
- Union Grove is located in Bradley County
- Eureka
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Eureka have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eureka
- Eureka is located in Bradley County
- Harbor Hills
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Harbor Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harbor Hills
- Harbor Hills is located in Bradley County
- Mount Harmony
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Mount Harmony have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Harmony
- Mount Harmony is located in Bradley County
- Sequoia Grove
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Sequoia Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sequoia Grove
- Sequoia Grove is located in Bradley County
- Shenandoah
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Shenandoah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shenandoah
- Shenandoah is located in Bradley County
- South Mapleton Hills
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for South Mapleton Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Mapleton Hills
- South Mapleton Hills is located in Bradley County
- Cedar Spring
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Cedar Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Spring
- Cedar Spring is located in Bradley County
- Burlington Heights
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Burlington Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burlington Heights
- Burlington Heights is located in Bradley County
- Countryside Village
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Countryside Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Countryside Village
- Countryside Village is located in Bradley County
- East Cleveland
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for East Cleveland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Cleveland
- East Cleveland is located in Bradley County
- Population from the 2010 Census: 1,608 people
- Eureka Hills
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Eureka Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eureka Hills
- Eureka Hills is located in Bradley County
- Northwest Acres
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Northwest Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Northwest Acres
- Northwest Acres is located in Bradley County
- Windwood
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Windwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Windwood
- Windwood is located in Bradley County
- Pumpkin Center
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Pumpkin Center have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pumpkin Center
- Pumpkin Center is located in Bradley County
- Sugar Grove
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Sugar Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sugar Grove
- Sugar Grove is located in Bradley County
- Twin Oaks
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Twin Oaks have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Twin Oaks
- Twin Oaks is located in Bradley County
- Bigsby Creek Estates
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Bigsby Creek Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bigsby Creek Estates
- Bigsby Creek Estates is located in Bradley County
- Camelot
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Camelot have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Camelot
- Camelot is located in Bradley County
- Cleveland
(30 miles [48.3 km] to the west)
- Davis Heights
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Davis Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Davis Heights
- Davis Heights is located in Bradley County
- Etola
(30 miles [48.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Etola. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Etola
- Etola is located in Bradley County
- Google driving directions:
- From your current location to Etola
- From Rural Vale to Etola
- Hope Acres
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Hope Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hope Acres
- Hope Acres is located in Bradley County
- Hopewell Estates
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Hopewell Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hopewell Estates
- Hopewell Estates is located in Bradley County
- Population from the 2010 Census: 1,874 people
- Hopewell
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Hopewell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hopewell
- Hopewell is located in Bradley County
- Lee Estates
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Lee Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lee Estates
- Lee Estates is located in Bradley County
- North Cleveland
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for North Cleveland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Cleveland
- North Cleveland is located in Bradley County
- Villa Heights
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Villa Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Villa Heights
- Villa Heights is located in Bradley County
- Westview Heights
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Westview Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westview Heights
- Westview Heights is located in Bradley County
- Loudon County
- County Website: https://loudoncounty-tn.gov/
- County Seat for Loudon: Loudon
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- Trigonia
(22 miles [35.4 km] to the northeast)
- Morganton Ferry
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Morganton Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morganton Ferry
- Morganton Ferry is located in Loudon County
- Sunnyside
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Sunnyside have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunnyside
- Sunnyside is located in Loudon County
- Morganton
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Morganton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Morganton
- Morganton is located in Loudon County
- Google driving directions:
- From your current location to Morganton
- From Rural Vale to Morganton
- Burton Mill
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Burton Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burton Mill
- Burton Mill is located in Loudon County
- Philadelphia
(25 miles [40.2 km] to the north)
- Luttrell
(25 miles [40.2 km] to the northwest)
- Alleghany ‑ Historic
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Alleghany have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alleghany
- Alleghany is located in Loudon County
- Estimated population in 2014: 630 people
- Big Piney
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Big Piney have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Big Piney
- Big Piney is located in Loudon County
- Griffitts ‑ Historic
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Griffitts have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Griffitts
- Griffitts is located in Loudon County
- Jackson Ferry
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Jackson Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jackson Ferry
- Jackson Ferry is located in Loudon County
- Maple Spring
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Maple Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maple Spring
- Maple Spring is located in Loudon County
- Continue List (19 more) ...
- Palin ‑ Historic
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Palin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Palin
- Palin is located in Loudon County
- Greenback
(26 miles [41.8 km] to the northeast)
- Jena
(26 miles [41.8 km] to the northeast)
- Erie
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Erie have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Erie
- Erie is located in Loudon County
- Cedar Fork
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Cedar Fork have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Fork
- Cedar Fork is located in Loudon County
- Fochee
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Fochee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fochee
- Fochee is located in Loudon County
- Coytee ‑ Historic
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Coytee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coytee
- Coytee is located in Loudon County
- Loudon City Park
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Loudon City Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loudon City Park
- Loudon City Park is located in Loudon County
- Meadow
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Meadow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meadow
- Meadow is located in Loudon County
- Prospect
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Prospect have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Prospect
- Prospect is located in Loudon County
- Robinson Mill
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Robinson Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Robinson Mill
- Robinson Mill is located in Loudon County
- Adolphus
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Adolphus have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Adolphus
- Adolphus is located in Loudon County
- Centersville
(29 miles [46.7 km] to the north)
- Davis Ferry
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Davis Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Davis Ferry
- Davis Ferry is located in Loudon County
- Davis
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Davis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Davis
- Davis is located in Loudon County
- Loudon
(29 miles [46.7 km] to the north)
- Glendale
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Glendale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glendale
- Glendale is located in Loudon County
- Pond Creek Ferry
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Pond Creek Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pond Creek Ferry
- Pond Creek Ferry is located in Loudon County
- Poplar Springs
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Poplar Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Poplar Springs
- Poplar Springs is located in Loudon County
- McMinn County
- County Website: https://mcminncountytn.gov/
- County Seat for McMinn: Athens
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- Mecca
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Mecca. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Mecca
- Mecca is located in McMinn County
- Google driving directions:
- From your current location to Mecca
- From Rural Vale to Mecca
- Prospect
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Prospect have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Prospect
- Prospect is located in McMinn County
- Liberty Hill
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Liberty Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liberty Hill
- Liberty Hill is located in McMinn County
- Macedonia
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Macedonia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Macedonia
- Macedonia is located in McMinn County
- Conasauga
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Conasauga have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Conasauga
- Conasauga is located in McMinn County
- Burger
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Burger have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burger
- Burger is located in McMinn County
- Nonaburg
(8 miles [12.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Nonaburg. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Nonaburg
- Nonaburg is located in McMinn County
- Google driving directions:
- From your current location to Nonaburg
- From Rural Vale to Nonaburg
- East Etowah
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for East Etowah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Etowah
- East Etowah is located in McMinn County
- Old Englewood
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Old Englewood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Englewood
- Old Englewood is located in McMinn County
- Etowah
(9 miles [14.5 km] to the west)
- Grady
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Grady have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grady
- Grady is located in McMinn County
- North Etowah
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for North Etowah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Etowah
- North Etowah is located in McMinn County
- Continue List (81 more) ...
- Williamsburg
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Williamsburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamsburg
- Williamsburg is located in McMinn County
- Addison
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Addison have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Addison
- Addison is located in McMinn County
- Englewood
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Englewood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Englewood
- Englewood is located in McMinn County
- Population from the 2020 Census: 1,538 people
- Jump to TripAdvisor's Tourism page for Englewood <5>
- Zion Hill
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Zion Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zion Hill
- Zion Hill is located in McMinn County
- Balltown
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Balltown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Balltown
- Balltown is located in McMinn County
- Belleview Estates
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Belleview Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belleview Estates
- Belleview Estates is located in McMinn County
- Cambria
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Cambria have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cambria
- Cambria is located in McMinn County
- Carlock
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Carlock have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carlock
- Carlock is located in McMinn County
- Seven Cedars
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Seven Cedars have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seven Cedars
- Seven Cedars is located in McMinn County
- Goodsprings
(11 miles [17.7 km] to the west)
- Goosetown
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Goosetown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goosetown
- Goosetown is located in McMinn County
- New Bethel
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for New Bethel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Bethel
- New Bethel is located in McMinn County
- Wesleyanna
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Wesleyanna have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wesleyanna
- Wesleyanna is located in McMinn County
- Bethsalem
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Bethsalem have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethsalem
- Bethsalem is located in McMinn County
- Manila
(12 miles [19.3 km] to the northwest)
- Mashburn
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Mashburn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mashburn
- Mashburn is located in McMinn County
- Mount Cumberland
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Mount Cumberland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Cumberland
- Mount Cumberland is located in McMinn County
- Yancey ‑ Historic
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Yancey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yancey
- Yancey is located in McMinn County
- Piney Grove
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Piney Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Piney Grove
- Piney Grove is located in McMinn County
- Fairview
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in McMinn County
- Heritage Park
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Heritage Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Heritage Park
- Heritage Park is located in McMinn County
- Sunset View
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Sunset View have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunset View
- Sunset View is located in McMinn County
- Dentville
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Dentville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dentville
- Dentville is located in McMinn County
- Bohannon Addition
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Bohannon Addition have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bohannon Addition
- Bohannon Addition is located in McMinn County
- Brewer Addition
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Brewer Addition have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brewer Addition
- Brewer Addition is located in McMinn County
- Ingleside Hill
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Ingleside Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ingleside Hill
- Ingleside Hill is located in McMinn County
- Knox Park
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Knox Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Knox Park
- Knox Park is located in McMinn County
- Lockmiller Addition
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Lockmiller Addition have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lockmiller Addition
- Lockmiller Addition is located in McMinn County
- Morningside
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Morningside have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morningside
- Morningside is located in McMinn County
- Double Springs
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Double Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Double Springs
- Double Springs is located in McMinn County
- South Liberty
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for South Liberty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Liberty
- South Liberty is located in McMinn County
- Athens
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Athens have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Athens
- Athens is located in McMinn County
- Population from the 2020 Census: 14,120 people
- Jump to TripAdvisor's Tourism page for Athens <5>
- Avalon Heights
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Avalon Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Avalon Heights
- Avalon Heights is located in McMinn County
- Cedar Springs
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Cedar Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Springs
- Cedar Springs is located in McMinn County
- Clem Jones Heights
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Clem Jones Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clem Jones Heights
- Clem Jones Heights is located in McMinn County
- Housley Addition
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Housley Addition have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Housley Addition
- Housley Addition is located in McMinn County
- Mount Harmony
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Mount Harmony have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Harmony
- Mount Harmony is located in McMinn County
- Ridgeway
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Ridgeway have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ridgeway
- Ridgeway is located in McMinn County
- Tellico Hills
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Tellico Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tellico Hills
- Tellico Hills is located in McMinn County
- Westwood Heights
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Westwood Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westwood Heights
- Westwood Heights is located in McMinn County
- Claxton
(16 miles [25.7 km] to the west)
- Luskville
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Luskville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Luskville
- Luskville is located in McMinn County
- Google driving directions:
- From your current location to Luskville
- From Rural Vale to Luskville
- Poplar Hill
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Poplar Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Poplar Hill
- Poplar Hill is located in McMinn County
- Alta Vista
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Alta Vista have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alta Vista
- Alta Vista is located in McMinn County
- Bell Spring
(17 miles [27.4 km] to the northwest)
- Bryson
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Bryson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bryson
- Bryson is located in McMinn County
- Forrest Hills
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Forrest Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forrest Hills
- Forrest Hills is located in McMinn County
- Hutsell
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Hutsell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hutsell
- Hutsell is located in McMinn County
- Niota
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Niota have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Niota
- Niota is located in McMinn County
- Population from the 2020 Census: 738 people
- Jump to TripAdvisor's Tourism page for Niota <5>
- Pickwatina Place
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Pickwatina Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pickwatina Place
- Pickwatina Place is located in McMinn County
- Coile
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Coile have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coile
- Coile is located in McMinn County
- Mount Verd
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Mount Verd have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Verd
- Mount Verd is located in McMinn County
- Reagan
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Reagan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reagan
- Reagan is located in McMinn County
- Marshall Hill
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Marshall Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marshall Hill
- Marshall Hill is located in McMinn County
- North Liberty
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for North Liberty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Liberty
- North Liberty is located in McMinn County
- Georgetown
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Georgetown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Georgetown
- Georgetown is located in McMinn County
- Riceville
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Riceville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riceville
- Riceville is located in McMinn County
- Population from the 2010 Census: 670 people
- Jump to TripAdvisor's Tourism page for Riceville <5>
- Suburban Hills
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Suburban Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Suburban Hills
- Suburban Hills is located in McMinn County
- Acme Mill
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Acme Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Acme Mill
- Acme Mill is located in McMinn County
- Barton Mill
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Barton Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barton Mill
- Barton Mill is located in McMinn County
- Sanford
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Sanford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sanford
- Sanford is located in McMinn County
- Clearwater
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Clearwater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clearwater
- Clearwater is located in McMinn County
- Pond Hill
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Pond Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pond Hill
- Pond Hill is located in McMinn County
- Calhoun
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Calhoun have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calhoun
- Calhoun is located in McMinn County
- Population from the 2020 Census: 503 people
- Jump to TripAdvisor's Tourism page for Calhoun <5>
- Spring Creek
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Spring Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Creek
- Spring Creek is located in McMinn County
- Watt Heights
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Watt Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Watt Heights
- Watt Heights is located in McMinn County
- Fiketon
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Fiketon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fiketon
- Fiketon is located in McMinn County
- Idlewild
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Idlewild have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Idlewild
- Idlewild is located in McMinn County
- Riddles Store
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Riddles Store have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riddles Store
- Riddles Store is located in McMinn County
- Rogers Creek
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Rogers Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rogers Creek
- Rogers Creek is located in McMinn County
- Prigmore
(23 miles [37 km] to the northwest)
- Union Grove
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Union Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Grove
- Union Grove is located in McMinn County
- Pine Grove
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Pine Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Grove
- Pine Grove is located in McMinn County
- Tranquillity
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Tranquillity have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tranquillity
- Tranquillity is located in McMinn County
- Folger ‑ Historic
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Folger have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Folger
- Folger is located in McMinn County
- Clear Springs
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Clear Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clear Springs
- Clear Springs is located in McMinn County
- Collins Mill
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Collins Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Collins Mill
- Collins Mill is located in McMinn County
- Murray Store
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Murray Store have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Murray Store
- Murray Store is located in McMinn County
- Hillsview
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Hillsview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillsview
- Hillsview is located in McMinn County
- Lamontville
(25 miles [40.2 km] to the west)
- Regret ‑ Historic
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Regret have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Regret
- Regret is located in McMinn County
- Meigs County
- County Website: https://www.meigscounty.org/
- County Seat for Meigs: Decatur
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- Boggess Crossroad
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Boggess Crossroad have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boggess Crossroad
- Boggess Crossroad is located in Meigs County
- Sewee
(26 miles [41.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Sewee. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Sewee
- Sewee is located in Meigs County
- Google driving directions:
- From your current location to Sewee
- From Rural Vale to Sewee
- Union Grove
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Union Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Grove
- Union Grove is located in Meigs County
- Walnut Grove
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Walnut Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walnut Grove
- Walnut Grove is located in Meigs County
- Cute ‑ Historic
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Cute have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cute
- Cute is located in Meigs County
- Surprise
(27 miles [43.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Surprise. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Surprise
- Surprise is located in Meigs County
- Estimated population in 2014: 1,799 people
- Google driving directions:
- From your current location to Surprise
- From Rural Vale to Surprise
- Decatur
(28 miles [45.1 km] to the northwest)
- Fairview
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Meigs County
- Allen
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Allen have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Allen
- Allen is located in Meigs County
- Goodfield
(28 miles [45.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Goodfield. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Goodfield
- Goodfield is located in Meigs County
- Google driving directions:
- From your current location to Goodfield
- From Rural Vale to Goodfield
- Breedenton
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Breedenton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Breedenton
- Breedenton is located in Meigs County
- Decatur Hills
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Decatur Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Decatur Hills
- Decatur Hills is located in Meigs County
- Continue List (9 more) ...
- Eves Ferry
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Eves Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eves Ferry
- Eves Ferry is located in Meigs County
- Ten Mile
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Ten Mile have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ten Mile
- Ten Mile is located in Meigs County
- Jump to TripAdvisor's Tourism page for Ten Mile <5>
- Beta
(29 miles [46.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Beta. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Beta
- Beta is located in Meigs County
- Google driving directions:
- From your current location to Beta
- From Rural Vale to Beta
- Akeman Crossroad
(30 miles [48.3 km] to the northwest)
- Calico
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Calico have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calico
- Calico is located in Meigs County
- Estimated population in 2014: 495 people
- Forest Grove
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Forest Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest Grove
- Forest Grove is located in Meigs County
- Prices Ferry
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Prices Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Prices Ferry
- Prices Ferry is located in Meigs County
- Big Spring
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Big Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Big Spring
- Big Spring is located in Meigs County
- Brittsville
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Brittsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brittsville
- Brittsville is located in Meigs County
- Polk County
- County Website: https://www.polkgovernment.com/
- County Seat for Polk: Benton
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- Servilla
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Servilla have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Servilla
- Servilla is located in Polk County
- Towee
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Towee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Towee
- Towee is located in Polk County
- Long Ford
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Long Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Long Ford
- Long Ford is located in Polk County
- Maggies Mill
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Maggies Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maggies Mill
- Maggies Mill is located in Polk County
- McFarland
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for McFarland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McFarland
- McFarland is located in Polk County
- Apalachia
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Apalachia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Apalachia
- Apalachia is located in Polk County
- Hambright
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Hambright have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hambright
- Hambright is located in Polk County
- Farner
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Farner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farner
- Farner is located in Polk County
- Austral
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Austral have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Austral
- Austral is located in Polk County
- Probst
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Probst have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Probst
- Probst is located in Polk County
- Reliance
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Reliance have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reliance
- Reliance is located in Polk County
- Jump to TripAdvisor's Tourism page for Reliance <5>
- Delano
(11 miles [17.7 km] to the west)
- Continue List (46 more) ...
- Wetmore
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Wetmore have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wetmore
- Wetmore is located in Polk County
- Pine Ridge
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Pine Ridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Ridge
- Pine Ridge is located in Polk County
- Turtletown
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Turtletown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turtletown
- Turtletown is located in Polk County
- Jump to TripAdvisor's Tourism page for Turtletown <5>
- Rymers ‑ Historic
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Rymers have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rymers
- Rymers is located in Polk County
- Harbuck
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Harbuck have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harbuck
- Harbuck is located in Polk County
- Kimsey
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Kimsey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kimsey
- Kimsey is located in Polk County
- Archville
(15 miles [24.1 km] to the southwest)
- Columbus ‑ Historic
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Columbus have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Columbus
- Columbus is located in Polk County
- Linsdale
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Linsdale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linsdale
- Linsdale is located in Polk County
- Old Patty
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Old Patty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Patty
- Old Patty is located in Polk County
- Patty
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Patty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patty
- Patty is located in Polk County
- Boonville ‑ Historic
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Boonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boonville
- Boonville is located in Polk County
- Chanceytown
(17 miles [27.4 km] to the south)
- Reesetown
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Reesetown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reesetown
- Reesetown is located in Polk County
- Oak Grove
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Oak Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Grove
- Oak Grove is located in Polk County
- Postelle
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Postelle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Postelle
- Postelle is located in Polk County
- Benton Springs
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Benton Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benton Springs
- Benton Springs is located in Polk County
- Caney Creek
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Caney Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caney Creek
- Caney Creek is located in Polk County
- Chestuee
(18 miles [29 km] to the west)
- Belltown Hill
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Belltown Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belltown Hill
- Belltown Hill is located in Polk County
- Estimated population in 2014: 2,457 people
- Ducktown
(19 miles [30.6 km] to the south)
- Isabella
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Isabella have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Isabella
- Isabella is located in Polk County
- Jump to TripAdvisor's Tourism page for Isabella <5>
- McAllister Hill
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for McAllister Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McAllister Hill
- McAllister Hill is located in Polk County
- McGeetown
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for McGeetown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McGeetown
- McGeetown is located in Polk County
- Stewardtown ‑ Historic
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Stewardtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stewardtown
- Stewardtown is located in Polk County
- Benton
(19 miles [30.6 km] to the southwest)
- Benton Station
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Benton Station have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benton Station
- Benton Station is located in Polk County
- Grief ‑ Historic
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Grief have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grief
- Grief is located in Polk County
- Belltown
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Belltown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belltown
- Belltown is located in Polk County
- Coletown
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Coletown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coletown
- Coletown is located in Polk County
- Copperhill
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Copperhill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Copperhill
- Copperhill is located in Polk County
- Population from the 2020 Census: 316 people
- Jump to TripAdvisor's Tourism page for Copperhill <5>
- Grassy Creek
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Grassy Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grassy Creek
- Grassy Creek is located in Polk County
- McHarg
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for McHarg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McHarg
- McHarg is located in Polk County
- Newtown
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Newtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newtown
- Newtown is located in Polk County
- Staffordtown
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Staffordtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Staffordtown
- Staffordtown is located in Polk County
- Parksville
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Parksville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parksville
- Parksville is located in Polk County
- Patterson Mill
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Patterson Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patterson Mill
- Patterson Mill is located in Polk County
- Camp Ocoee
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Camp Ocoee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Camp Ocoee
- Camp Ocoee is located in Polk County
- Chable ‑ Historic
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Chable have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chable
- Chable is located in Polk County
- Fetzerton ‑ Historic
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Fetzerton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fetzerton
- Fetzerton is located in Polk County
- Ocoee
(23 miles [37 km] to the southwest)
- Sylco
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Sylco have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sylco
- Sylco is located in Polk County
- Ball Play
(27 miles [43.5 km] to the southwest)
- Oldfort
(27 miles [43.5 km] to the southwest)
- Willis Springs
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Willis Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willis Springs
- Willis Springs is located in Polk County
- Conasauga
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Conasauga have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Conasauga
- Conasauga is located in Polk County
- Jump to TripAdvisor's Tourism page for Conasauga <5>
- Roane County
- County Website: https://roanecountytn.gov/
- County Seat for Roane: Kingston
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- Johnson
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Johnson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johnson
- Johnson is located in Roane County
- Cook Mill
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Cook Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cook Mill
- Cook Mill is located in Roane County
- Pattie Gap ‑ Historic
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Pattie Gap have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pattie Gap
- Pattie Gap is located in Roane County
- Fannin County
- County Website: https://fannincountyga.com/
- County Seat for Fannin: Blue Ridge (GA)
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- Fry
(22 miles [35.4 km] to the south)
- Jonestown
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Jonestown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonestown
- Jonestown is located in Fannin County (GA)
- McCaysville
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for McCaysville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McCaysville
- McCaysville is located in Fannin County (GA)
- Population from the 2020 Census: 1,217 people
- Jump to TripAdvisor's Tourism page for McCaysville <5>
- Pantertown
(22 miles [35.4 km] to the south)
- Salem
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salem
- Salem is located in Fannin County (GA)
- Williamstown
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamstown
- Williamstown is located in Fannin County (GA)
- Kingtown
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Kingtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingtown
- Kingtown is located in Fannin County (GA)
- Watson Gap ‑ Historic
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Watson Gap have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Watson Gap
- Watson Gap is located in Fannin County (GA)
- Epworth
(24 miles [38.6 km] to the south)
- Kyle
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Kyle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kyle
- Kyle is located in Fannin County (GA)
- Pierceville
(24 miles [38.6 km] to the south)
- Rocky Gap ‑ Historic
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Rocky Gap have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rocky Gap
- Rocky Gap is located in Fannin County (GA)
- Continue List (34 more) ...
- Sweet Gum
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Sweet Gum have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sweet Gum
- Sweet Gum is located in Fannin County (GA)
- Union
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Union have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union
- Union is located in Fannin County (GA)
- Galloway
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Galloway have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galloway
- Galloway is located in Fannin County (GA)
- McCullough
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for McCullough have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McCullough
- McCullough is located in Fannin County (GA)
- Pleasant Hill
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Pleasant Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Hill
- Pleasant Hill is located in Fannin County (GA)
- Coles Crossing
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Coles Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coles Crossing
- Coles Crossing is located in Fannin County (GA)
- Curtis
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Curtis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Curtis
- Curtis is located in Fannin County (GA)
- Cutcane
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Cutcane have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cutcane
- Cutcane is located in Fannin County (GA)
- Estimated population in 2019: 3,417 people
- Dunn
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Dunn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunn
- Dunn is located in Fannin County (GA)
- Hothouse
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Hothouse have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hothouse
- Hothouse is located in Fannin County (GA)
- Madola
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Madola have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Madola
- Madola is located in Fannin County (GA)
- Windy Ridge
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Windy Ridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Windy Ridge
- Windy Ridge is located in Fannin County (GA)
- Bakers Ferry
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Bakers Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bakers Ferry
- Bakers Ferry is located in Fannin County (GA)
- Brown Mill
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Brown Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brown Mill
- Brown Mill is located in Fannin County (GA)
- Dora ‑ Historic
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Dora have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dora
- Dora is located in Fannin County (GA)
- Lickskillet
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Lickskillet have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lickskillet
- Lickskillet is located in Fannin County (GA)
- Mineral Bluff
(27 miles [43.5 km] to the south)
- Chestnut Gap
(28 miles [45.1 km] to the south)
- Galloway Mill
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Galloway Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galloway Mill
- Galloway Mill is located in Fannin County (GA)
- Loving
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Loving have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loving
- Loving is located in Fannin County (GA)
- Oasis
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Oasis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oasis
- Oasis is located in Fannin County (GA)
- Colwell
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Colwell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colwell
- Colwell is located in Fannin County (GA)
- Forge Mill
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Forge Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forge Mill
- Forge Mill is located in Fannin County (GA)
- Higdon
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Higdon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Higdon
- Higdon is located in Fannin County (GA)
- Jones Mill ‑ Historic
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Jones Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jones Mill
- Jones Mill is located in Fannin County (GA)
- Lakewood
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Lakewood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakewood
- Lakewood is located in Fannin County (GA)
- Maple Grove
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Maple Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maple Grove
- Maple Grove is located in Fannin County (GA)
- Murphy Junction
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Murphy Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Murphy Junction
- Murphy Junction is located in Fannin County (GA)
- Sugar Creek
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Sugar Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sugar Creek
- Sugar Creek is located in Fannin County (GA)
- Wright Mill
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Wright Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wright Mill
- Wright Mill is located in Fannin County (GA)
- Blue Ridge
(30 miles [48.3 km] to the south)
- Bryan Mill
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Bryan Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bryan Mill
- Bryan Mill is located in Fannin County (GA)
- Elrod Mill
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Elrod Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elrod Mill
- Elrod Mill is located in Fannin County (GA)
- Morganton
(30 miles [48.3 km] to the south)
- Murray County
- County Website: https://www.murraycountyga.org/
- County Seat for Murray: Chatsworth (GA)
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- Alaculsy
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Alaculsy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alaculsy
- Alaculsy is located in Murray County (GA)
- Doogan
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Doogan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Doogan
- Doogan is located in Murray County (GA)
- Union County
- County Website: https://www.unioncountyga.gov/
- County Seat for Union: Blairsville (GA)
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- Pearl
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Pearl have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pearl
- Pearl is located in Union County (GA)
- Lance Mill
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Lance Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lance Mill
- Lance Mill is located in Union County (GA)
- Lewner
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Lewner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lewner
- Lewner is located in Union County (GA)
- Ivylog
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Ivylog have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ivylog
- Ivylog is located in Union County (GA)
- Thomas Mill
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Thomas Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thomas Mill
- Thomas Mill is located in Union County (GA)
- Cherokee County
- County Website: http://www.cherokeecounty-nc.gov/
- County Seat for Cherokee: Murphy (NC)
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- Hiwassee
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Hiwassee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hiwassee
- Hiwassee is located in Cherokee County (NC)
- Violet
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Violet have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Violet
- Violet is located in Cherokee County (NC)
- Pleasant Hill
(12 miles [19.3 km] to the southeast)
- Liberty
(13 miles [20.9 km] to the south)
- Fields of the Wood
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Fields of the Wood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fields of the Wood
- Fields of the Wood is located in Cherokee County (NC)
- Unaka
(14 miles [22.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Unaka. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Unaka
- Unaka is located in Cherokee County (NC)
- Google driving directions:
- From your current location to Unaka
- From Rural Vale to Unaka
- Wehutty
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Wehutty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wehutty
- Wehutty is located in Cherokee County (NC)
- Hiwassee Village
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Hiwassee Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hiwassee Village
- Hiwassee Village is located in Cherokee County (NC)
- Oak Park
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Oak Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Park
- Oak Park is located in Cherokee County (NC)
- Vests
(15 miles [24.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Vests. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Vests
- Vests is located in Cherokee County (NC)
- Google driving directions:
- From your current location to Vests
- From Rural Vale to Vests
- Ogreeta
(16 miles [25.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Ogreeta. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ogreeta
- Ogreeta is located in Cherokee County (NC)
- Google driving directions:
- From your current location to Ogreeta
- From Rural Vale to Ogreeta
- Postell
(17 miles [27.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Postell. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Postell
- Postell is located in Cherokee County (NC)
- Google driving directions:
- From your current location to Postell
- From Rural Vale to Postell
- Continue List (32 more) ...
- Fain Ford
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Fain Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fain Ford
- Fain Ford is located in Cherokee County (NC)
- Burger Town
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Burger Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burger Town
- Burger Town is located in Cherokee County (NC)
- Friendship
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Friendship have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Friendship
- Friendship is located in Cherokee County (NC)
- Wolf Creek
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Wolf Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wolf Creek
- Wolf Creek is located in Cherokee County (NC)
- Ebenezer
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Ebenezer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ebenezer
- Ebenezer is located in Cherokee County (NC)
- Grandview
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Grandview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grandview
- Grandview is located in Cherokee County (NC)
- Grape Creek
(20 miles [32.2 km] to the southeast)
- Boiling Springs
(21 miles [33.8 km] to the east)
- Hothouse
(21 miles [33.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Hothouse. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hothouse
- Hothouse is located in Cherokee County (NC)
- Google driving directions:
- From your current location to Hothouse
- From Rural Vale to Hothouse
- Johnsonville
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Johnsonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johnsonville
- Johnsonville is located in Cherokee County (NC)
- Sunny Point
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Sunny Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunny Point
- Sunny Point is located in Cherokee County (NC)
- Bates Creek
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Bates Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bates Creek
- Bates Creek is located in Cherokee County (NC)
- Letitia
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Letitia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Letitia
- Letitia is located in Cherokee County (NC)
- Pleasant Valley
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Pleasant Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Valley
- Pleasant Valley is located in Cherokee County (NC)
- Texana
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Texana have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Texana
- Texana is located in Cherokee County (NC)
- Culberson
(24 miles [38.6 km] to the southeast)
- Murphy
(24 miles [38.6 km] to the southeast)
- Regal
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Regal have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Regal
- Regal is located in Cherokee County (NC)
- Sales Ford
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Sales Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sales Ford
- Sales Ford is located in Cherokee County (NC)
- Tomotla
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Tomotla have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tomotla
- Tomotla is located in Cherokee County (NC)
- Maltby
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Maltby have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maltby
- Maltby is located in Cherokee County (NC)
- Marble
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Marble have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marble
- Marble is located in Cherokee County (NC)
- Jump to TripAdvisor's Tourism page for Marble <5>
- Coalville
(27 miles [43.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Coalville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Coalville
- Coalville is located in Cherokee County (NC)
- Google driving directions:
- From your current location to Coalville
- From Rural Vale to Coalville
- Oak Grove
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Oak Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Grove
- Oak Grove is located in Cherokee County (NC)
- Arrwood Mill
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Arrwood Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arrwood Mill
- Arrwood Mill is located in Cherokee County (NC)
- Bellview
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Bellview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bellview
- Bellview is located in Cherokee County (NC)
- Martins Creek
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Martins Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Martins Creek
- Martins Creek is located in Cherokee County (NC)
- Peachtree
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Peachtree have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peachtree
- Peachtree is located in Cherokee County (NC)
- Woodville
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Woodville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodville
- Woodville is located in Cherokee County (NC)
- Hardin
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Hardin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hardin
- Hardin is located in Cherokee County (NC)
- Jones Mill
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Jones Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jones Mill
- Jones Mill is located in Cherokee County (NC)
- Mission
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Mission have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mission
- Mission is located in Cherokee County (NC)
- Clay County
- County Website: https://www.clayconc.com/
- County Seat for Clay: Hayesville (NC)
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- Brasstown
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Brasstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brasstown
- Brasstown is located in Clay County (NC)
- Jump to TripAdvisor's Tourism page for Brasstown <5>
- Pinelog
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Pinelog have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinelog
- Pinelog is located in Clay County (NC)
- Graham County
- County Website: https://www.grahamcounty.org/
- County Seat for Graham: Robbinsville (NC)
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- These communities are listed by their distance from Rural Vale.
- McGuires
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for McGuires have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McGuires
- McGuires is located in Graham County (NC)
- Jenkins Meadow
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Jenkins Meadow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jenkins Meadow
- Jenkins Meadow is located in Graham County (NC)
- Junction
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Junction
- Junction is located in Graham County (NC)
- Dentons
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Dentons have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dentons
- Dentons is located in Graham County (NC)
- Rattler Ford
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Rattler Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rattler Ford
- Rattler Ford is located in Graham County (NC)
- Tapoco
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Tapoco have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tapoco
- Tapoco is located in Graham County (NC)
- Lake Santeetlah
(28 miles [45.1 km] to the east)
- Rymers Ferry
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Rymers Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rymers Ferry
- Rymers Ferry is located in Graham County (NC)
- Milltown
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Milltown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milltown
- Milltown is located in Graham County (NC)
- Yellow Creek
(30 miles [48.3 km] to the east)
- Swain County
- County Website: https://www.swaincountync.gov/
- County Seat for Swain: Bryson City (NC)
- Genealogy Websites ...
- Nearest Communities to Rural Vale ...
- Fairfax
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Fairfax have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfax
- Fairfax is located in Swain County (NC)
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Rural Vale) to Point B.Our distance measurements begin at a specific point in Rural Vale. The point we use is located at these GPS coordinates - Latitude: 35.3116, Longitude: -84.3602 In this case, the coordinates for Rural Vale have been provided by the Geographic Names Information System (GNIS). |
| <2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.
We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.
Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|