Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Rader (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Rader. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Rader is located in Greene County.
To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Greene County: Madison (NC), Cocke, Hamblen, Hawkins, Unicoi & Washington.
Below are the counties that are near Rader. For each of these counties, we show a sample of those communities that are closest to Rader:
- Greene County (The home county of Rader)
- The following are listed by their distance from Rader, with the one closest to Rader listed first.
- Mosheim
(2 miles [3.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Mosheim have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mosheim
- Mosheim is located in Greene County
- Population from the 2020 Census: 2,357 people
- Jump to TripAdvisor's Tourism page for Mosheim <2>
- Midway
(3 miles [4.8 km] to the west)
- Greeneville
(5 miles [8 km] to the east)
- Albany
(5 miles [8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Albany. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Albany
- Albany is located in Greene County
- Bright Hope
(5 miles [8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Bright Hope. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bright Hope
- Bright Hope is located in Greene County
- Little Chucky ‑ Historic
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Little Chucky have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Chucky
- Little Chucky is located in Greene County
- Marvin
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Marvin. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Marvin
- Marvin is located in Greene County
- Forest Hills
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Forest Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest Hills
- Forest Hills is located in Greene County
- Estimated population in 2014: 5,027 people
- Ottway
(7 miles [11.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Ottway. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ottway
- Ottway is located in Greene County
- Bolton Estates
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Bolton Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bolton Estates
- Bolton Estates is located in Greene County
- Estimated population in 2014: 5,152 people
- Morelock ‑ Historic
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Morelock have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morelock
- Morelock is located in Greene County
- Romeo
(8 miles [12.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Romeo. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Romeo
- Romeo is located in Greene County
- Warrensburg
(9 miles [14.5 km] to the west)
- Jump to our Gazetteer entry for Warrensburg
- Warrensburg is located in Greene County
- Cocke County
- The following are listed by their distance from Rader, with the one closest to Rader listed first.
- Parrottsville
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Parrottsville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parrottsville
- Parrottsville is located in Cocke County
- Population from the 2020 Census: 283 people
- Jump to TripAdvisor's Tourism page for Parrottsville <2>
- Bybee
(16 miles [25.7 km] to the southwest)
- Del Rio
(17 miles [27.4 km] to the south)
- Wolf Creek
(17 miles [27.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Wolf Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Wolf Creek
- Wolf Creek is located in Cocke County
- Bridgeport
(18 miles [29 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Bridgeport. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bridgeport
- Bridgeport is located in Cocke County
- West Myers
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for West Myers have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Myers
- West Myers is located in Cocke County
- Estimated population in 2014: 2,282 people
- Jimtown
(19 miles [30.6 km] to the southwest)
- Jump to our Gazetteer entry for Jimtown
- Jimtown is located in Cocke County
- Nough
(20 miles [32.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Nough. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Nough
- Nough is located in Cocke County
- Jaybird
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Jaybird have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jaybird
- Jaybird is located in Cocke County
- Estimated population in 2014: 3,299 people
- Newport
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Newport have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newport
- Newport is located in Cocke County
- Population from the 2020 Census: 6,894 people
- Jump to TripAdvisor's Tourism page for Newport <2>
- Tom Town
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Tom Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tom Town
- Tom Town is located in Cocke County
- Edwina
(22 miles [35.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Edwina. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Edwina
- Edwina is located in Cocke County
- Clevenger
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Clevenger have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clevenger
- Clevenger is located in Cocke County
- Estimated population in 2014: 43,182 people
- Grainger County
- The following are listed by their distance from Rader, with the one closest to Rader listed first.
- Bean Station
(22 miles [35.4 km] to the northwest)
- Wyatt Village
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Wyatt Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wyatt Village
- Wyatt Village is located in Grainger County
- Marshalls Ferry
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Marshalls Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marshalls Ferry
- Marshalls Ferry is located in Grainger County
- Beans
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Beans have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beans
- Beans is located in Grainger County
- Estimated population in 2014: 3,084 people
- Thorn Hill
(29 miles [46.7 km] to the northwest)
- Jump to our Gazetteer entry for Thorn Hill
- Thorn Hill is located in Grainger County
- Bowen
(29 miles [46.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Bowen. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bowen
- Bowen is located in Grainger County
- Wa-Ni Village
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Wa-Ni Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wa-Ni Village
- Wa-Ni Village is located in Grainger County
- Hamblen County
- The following are listed by their distance from Rader, with the one closest to Rader listed first.
- Whitesburg
(13 miles [20.9 km] to the northwest)
- Silver City
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver City
- Silver City is located in Hamblen County
- East Village
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for East Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Village
- East Village is located in Hamblen County
- Bright ‑ Historic
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Bright have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bright
- Bright is located in Hamblen County
- Estimated population in 2014: 2,942 people
- Monte Vista Estates
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Monte Vista Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monte Vista Estates
- Monte Vista Estates is located in Hamblen County
- Estimated population in 2014: 2,860 people
- Morristown
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Morristown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morristown
- Morristown is located in Hamblen County
- Population from the 2020 Census: 30,275 people
- Jump to TripAdvisor's Tourism page for Morristown <2>
- Casablanca
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Casablanca have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Casablanca
- Casablanca is located in Hamblen County
- Estimated population in 2014: 2,223 people
- Collons Ferry
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Collons Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Collons Ferry
- Collons Ferry is located in Hamblen County
- Estimated population in 2014: 986 people
- Hancock County
- The following are listed by their distance from Rader, with the one closest to Rader listed first.
- Yount Town
(25 miles [40.2 km] to the northwest)
- Jump to our Gazetteer entry for Yount Town
- Yount Town is located in Hancock County
- Trent Valley
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Trent Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trent Valley
- Trent Valley is located in Hancock County
- Estimated population in 2014: 4,157 people
- Duck Creek
(27 miles [43.5 km] to the northwest)
- Jump to our Gazetteer entry for Duck Creek
- Duck Creek is located in Hancock County
- Kyles Ford
(28 miles [45.1 km] to the north)
- Willis
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Willis have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willis
- Willis is located in Hancock County
- Estimated population in 2014: 387 people
- Sneedville
(29 miles [46.7 km] to the northwest)
- Hawkins County
- The following are listed by their distance from Rader, with the one closest to Rader listed first.
- Bulls Gap
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Bulls Gap have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bulls Gap
- Bulls Gap is located in Hawkins County
- Population from the 2020 Census: 717 people
- Jump to TripAdvisor's Tourism page for Bulls Gap <2>
- Persia
(12 miles [19.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Persia. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Persia
- Persia is located in Hawkins County
- Strahl
(12 miles [19.3 km] to the north)
- Jump to our Gazetteer entry for Strahl
- Strahl is located in Hawkins County
- Kepler
(16 miles [25.7 km] to the north)
- Jump to our Gazetteer entry for Kepler
- Kepler is located in Hawkins County
- Rogersville
(16 miles [25.7 km] to the north)
- Amis
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Amis. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Amis
- Amis is located in Hawkins County
- Red Bridge Ferry
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Red Bridge Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Bridge Ferry
- Red Bridge Ferry is located in Hawkins County
- Estimated population in 2014: 1,135 people
- Chimneytop ‑ Historic
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Chimneytop have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chimneytop
- Chimneytop is located in Hawkins County
- Galbraith Springs
(19 miles [30.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Galbraith Springs. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Galbraith Springs
- Galbraith Springs is located in Hawkins County
- Mooresburg
(20 miles [32.2 km] to the northwest)
- Surgoinsville
(21 miles [33.8 km] to the north)
- Mooresburg Springs
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Mooresburg Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mooresburg Springs
- Mooresburg Springs is located in Hawkins County
- Population from the 2010 Census: 941 people
- Blossom
(22 miles [35.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Blossom. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Blossom
- Blossom is located in Hawkins County
- Jefferson County
- The following are listed by their distance from Rader, with the one closest to Rader listed first.
- Leadvale
(18 miles [29 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Leadvale. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Leadvale
- Leadvale is located in Jefferson County
- White Pine
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for White Pine have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Pine
- White Pine is located in Jefferson County
- Population from the 2020 Census: 2,634 people
- Jump to TripAdvisor's Tourism page for White Pine <2>
- Baneberry
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Baneberry have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Baneberry
- Baneberry is located in Jefferson County
- Population from the 2020 Census: 540 people
- Jump to TripAdvisor's Tourism page for Baneberry <2>
- Edna
(25 miles [40.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Edna. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Edna
- Edna is located in Jefferson County
- Talbott
(26 miles [41.8 km] to the west)
- Dandridge
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Dandridge have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dandridge
- Dandridge is located in Jefferson County
- Population from the 2020 Census: 3,182 people
- Jump to TripAdvisor's Tourism page for Dandridge <2>
- Rock Town
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Rock Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock Town
- Rock Town is located in Jefferson County
- Sullivan County
- The following are listed by their distance from Rader, with the one closest to Rader listed first.
- Blair Gap
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Blair Gap have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blair Gap
- Blair Gap is located in Sullivan County
- Estimated population in 2014: 1,870 people
- Fordtown
(30 miles [48.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Fordtown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Fordtown
- Fordtown is located in Sullivan County
- Unicoi County
- The following are listed by their distance from Rader, with the one closest to Rader listed first.
- Loganton ‑ Historic
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Loganton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loganton
- Loganton is located in Unicoi County
- Flag Pond
(23 miles [37 km] to the southeast)
- Jump to our Gazetteer entry for Flag Pond
- Flag Pond is located in Unicoi County
- Bumpus Cove
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Bumpus Cove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bumpus Cove
- Bumpus Cove is located in Unicoi County
- Estimated population in 2014: 729 people
- Clear Branch
(24 miles [38.6 km] to the east)
- Jump to our Gazetteer entry for Clear Branch
- Clear Branch is located in Unicoi County
- Former name for Clear Branch:
- Kittyton
- Ernestville
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Ernestville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ernestville
- Ernestville is located in Unicoi County
- Estimated population in 2014: 1,311 people
- Indian Creek ‑ Historic
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Indian Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Indian Creek
- Indian Creek is located in Unicoi County
- Banner Hill
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Banner Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Banner Hill
- Banner Hill is located in Unicoi County
- Population from the 2010 Census: 1,497 people
- Erwin
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Erwin have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Erwin
- Erwin is located in Unicoi County
- Population from the 2020 Census: 5,854 people
- Jump to TripAdvisor's Tourism page for Erwin <2>
- Washington County
- The following are listed by their distance from Rader, with the one closest to Rader listed first.
- Limestone
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Limestone. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Limestone
- Limestone is located in Washington County
- Jump to TripAdvisor's Tourism page for Limestone <2>
- Mill Brook
(18 miles [29 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Mill Brook. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mill Brook
- Mill Brook is located in Washington County
- Oakland
(18 miles [29 km] to the east)
- Jump to our Gazetteer entry for Oakland
- Oakland is located in Washington County
- Nolichucky ‑ Historic
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for Nolichucky have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nolichucky
- Nolichucky is located in Washington County
- Population from the 2010 Census: 5,861 people
- Ducktown
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Ducktown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ducktown
- Ducktown is located in Washington County
- Estimated population in 2014: 457 people
- Conklin
(21 miles [33.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Conklin. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Conklin
- Conklin is located in Washington County
- Big Sandy
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Big Sandy have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Big Sandy
- Big Sandy is located in Washington County
- Estimated population in 2014: 542 people
- Bowmantown
(21 miles [33.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Bowmantown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bowmantown
- Bowmantown is located in Washington County
- Population from the 2010 Census: 302 people
- Telford
(22 miles [35.4 km] to the east)
- Locust Mount
(23 miles [37 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Locust Mount. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Locust Mount
- Locust Mount is located in Washington County
- Fall Branch
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Fall Branch. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Fall Branch
- Fall Branch is located in Washington County
- Population from the 2010 Census: 1,291 people
- Jump to TripAdvisor's Tourism page for Fall Branch <2>
- Kansas City
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Kansas City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kansas City
- Kansas City is located in Washington County
- Harmony
(25 miles [40.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Harmony. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Harmony
- Harmony is located in Washington County
- Haywood County (NC)
- Mount Sterling
(29 miles [46.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Mount Sterling. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mount Sterling
- Mount Sterling is located in Haywood County (NC)
- Madison County (NC)
- The following are listed by their distance from Rader, with the one closest to Rader listed first.
- Allenstand
(16 miles [25.7 km] to the southeast)
- Jump to our Gazetteer entry for Allenstand
- Allenstand is located in Madison County (NC)
- Allegheny
(19 miles [30.6 km] to the southeast)
- Jump to our Gazetteer entry for Allegheny
- Allegheny is located in Madison County (NC)
- Cutshalltown
(19 miles [30.6 km] to the southeast)
- Jump to our Gazetteer entry for Cutshalltown
- Cutshalltown is located in Madison County (NC)
- White Rock
(19 miles [30.6 km] to the southeast)
- Jump to our Gazetteer entry for White Rock
- White Rock is located in Madison County (NC)
- Hot Springs
(20 miles [32.2 km] to the south)
- Chapel Hill
(20 miles [32.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Chapel Hill. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Chapel Hill
- Chapel Hill is located in Madison County (NC)
- Hurricane
(20 miles [32.2 km] to the southeast)
- Jump to our Gazetteer entry for Hurricane
- Hurricane is located in Madison County (NC)
- Stackhouse
(22 miles [35.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Stackhouse. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Stackhouse
- Stackhouse is located in Madison County (NC)
- Bluff
(23 miles [37 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Bluff. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bluff
- Bluff is located in Madison County (NC)
- Lynch ‑ Historic
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Lynch have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynch
- Lynch is located in Madison County (NC)
- Foster Creek
(24 miles [38.6 km] to the southeast)
- Jump to our Gazetteer entry for Foster Creek
- Foster Creek is located in Madison County (NC)
- Walnut
(24 miles [38.6 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Walnut. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Walnut
- Walnut is located in Madison County (NC)
- Spring Creek
(25 miles [40.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Spring Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Spring Creek
- Spring Creek is located in Madison County (NC)
For an expanded list of the communities that are closest to Rader, see our County-by-County Page for Rader.
Cemeteries Near Rader ...
Below are cemeteries that are in the vicinity of Rader.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Rader covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Rader, with the one closest to Rader listed first.
- Susong Cemetery
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for the Susong Cemetery
- Note: The GPS coordinates that we are using for the Susong Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Midway Cumberland Presbyterian Cemetery
(3 miles [4.8 km] to the west)
- Hawkins Cemetery
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for the Hawkins Cemetery
- Note: The GPS coordinates that we are using for the Hawkins Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Andrew Johnson National Cemetery
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for the Andrew Johnson National Cemetery
- Note: The GPS coordinates that we are using for the Andrew Johnson National Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Harmony Cemetery
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for the Harmony Cemetery
- Note: The GPS coordinates that we are using for the Harmony Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Oak Grove Cemetery
(6 miles [9.7 km] to the east)
- Mt. Bethel Cemetery
(6 miles [9.7 km] to the east)
- Jump to our Gazetteer entry for the Mt. Bethel Cemetery
- Note: The GPS coordinates that we are using for the Mt. Bethel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- McCurry Cemetery
(6 miles [9.7 km] to the east)
- Jump to our Gazetteer entry for the McCurry Cemetery
- Note: The GPS coordinates that we are using for the McCurry Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Bible Cemetery
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for the Bible Cemetery
- Note: The GPS coordinates that we are using for the Bible Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Brotherton Cemetery
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for the Brotherton Cemetery
- Note: The GPS coordinates that we are using for the Brotherton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Fortner Cemetery
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for the Fortner Cemetery
- Note: The GPS coordinates that we are using for the Fortner Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Brown Cemetery
(7 miles [11.3 km] to the northwest)
- Jump to our Gazetteer entry for the Brown Cemetery
- Note: The GPS coordinates that we are using for the Brown Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Continue List (911 more) ...
- Wisecarver Cemetery
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for the Wisecarver Cemetery
- Note: The GPS coordinates that we are using for the Wisecarver Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Crosby Cemetery
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for the Crosby Cemetery
- Note: The GPS coordinates that we are using for the Crosby Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- New Hope Cemetery
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for the New Hope Cemetery
- Note: The GPS coordinates that we are using for the New Hope Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
The Rand McNally Atlas shows that in 1895, Rader had railroad service and no post office.
These communities are listed based on their distance from Rader, with the one closest to Rader listed first.
- Mosheim
(2 miles [3.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Mosheim have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mosheim
- Mosheim is located in Greene County
- Population from the 2020 Census: 2,357 people
- Jump to TripAdvisor's Tourism page for Mosheim <2>
- Timber Ridge
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Timber Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Timber Ridge
- Timber Ridge is located in Greene County
- Midway
(3 miles [4.8 km] to the west)
- Little Chucky ‑ Historic
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Little Chucky have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Chucky
- Little Chucky is located in Greene County
- Bright Hope
(5 miles [8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Bright Hope. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bright Hope
- Bright Hope is located in Greene County
- Derby ‑ Historic
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Derby have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Derby
- Derby is located in Greene County
- Albany
(5 miles [8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Albany. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Albany
- Albany is located in Greene County
- Marvin
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Marvin. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Marvin
- Marvin is located in Greene County
- Pate Hill
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Pate Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pate Hill
- Pate Hill is located in Greene County
- Pilot Knob
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Pilot Knob have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pilot Knob
- Pilot Knob is located in Greene County
- Ottway
(7 miles [11.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Ottway. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ottway
- Ottway is located in Greene County
- Mohawk
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Mohawk have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mohawk
- Mohawk is located in Greene County
- Continue List (16 more) ...
- Romeo
(8 miles [12.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Romeo. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Romeo
- Romeo is located in Greene County
- Morelock ‑ Historic
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Morelock have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morelock
- Morelock is located in Greene County
- Thula
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Thula have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thula
- Thula is located in Greene County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Rader. See our List of 1890's Communities around Rader.
Newspapers Published in Rader ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 42 newspapers that have been published in the area around Rader.
Although we're unaware of any newspapers that were published in the immediate area of Rader, there are papers which were published within 13 miles [20.9 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Rader.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Rader:
- Websites specific to Tennessee
- Pages specific to Greene County
- Genealogy information for nearby counties
- Cocke County
- Grainger County
- Hamblen County
- Hancock County
- Hawkins County
- Jefferson County
- Sullivan County
- Unicoi County
- Washington County
- Haywood County
- Madison County
- Cemetery Information and Directories for Tennessee
Off-the-Road Links ...
Unfortunately, we don't know of a website for Rader. If you can help, please contact us through our Feedback Page.
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rader, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Rader) to Point B.Our distance measurements begin at a specific point in Rader. The point we use is located at these GPS coordinates - Latitude: 36.1709, Longitude: -82.9318 In this case, the coordinates for Rader have been provided by the Geographic Names Information System (GNIS). |