RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Decatur County >> Liberty >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Liberty (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Liberty. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Liberty is located in Decatur County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Decatur County: Benton, Carroll, Hardin, Henderson, Perry & Wayne.

Below are the counties that are near Liberty. For each of these counties, we show a sample of those communities that are closest to Liberty:

  • Decatur County     (The home county of Liberty)
    • The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
    • Dunbar
      (4 miles [6.4 km] to the east)
      • Jump to our Gazetteer entry for Dunbar
      • Dunbar is located in Decatur County
    • Pleasant Hill
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Pleasant Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pleasant Hill
      • Pleasant Hill is located in Decatur County
      • Estimated population in 2014: 566 people
    • Scotts Hill
      (5 miles [8 km] to the north)
    • Decaturville
      (10 miles [16.1 km] to the northeast)
    • Mount Lebanon
      (12 miles [19.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Mount Lebanon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Lebanon
      • Mount Lebanon is located in Decatur County
      • Estimated population in 2014: 29,387 people
    • Parsons
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Parsons have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Parsons
      • Parsons is located in Decatur County
      • Population from the 2020 Census: 2,272 people
      • Jump to TripAdvisor's Tourism page for Parsons <2>
    • Sulphur Springs ‑ Historic
      (17 miles [27.4 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Sulphur Springs. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sulphur Springs
      • Sulphur Springs is located in Decatur County
    • Jeannette
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for Jeannette
      • Jeannette is located in Decatur County
    • Oakview ‑ Historic
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Oakview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oakview
      • Oakview is located in Decatur County
    • Sugar Tree
      (28 miles [45.1 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Sugar Tree. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sugar Tree
      • Sugar Tree is located in Decatur County
  • Benton County
    • Chaseville
      (30 miles [48.3 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Chaseville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Chaseville
      • Chaseville is located in Benton County
  • Carroll County
    • Clarksburg
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Clarksburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clarksburg
      • Clarksburg is located in Carroll County
      • Population from the 2020 Census: 376 people
  • Chester County
    • The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
    • Milledgeville
      (9 miles [14.5 km] to the southwest)
      • Jump to our Gazetteer entry for Milledgeville
      • Milledgeville is located in Chester County
      • Population from the 2020 Census: 267 people
    • Enville
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Enville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Enville
      • Enville is located in Chester County
      • Population from the 2020 Census: 189 people
    • Jacks Creek
      (17 miles [27.4 km] to the west)
    • Sweet Lips
      (17 miles [27.4 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Sweet Lips. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sweet Lips
      • Sweet Lips is located in Chester County
    • Mifflin
      (21 miles [33.8 km] to the west)
      • Jump to our Gazetteer entry for Mifflin
      • Mifflin is located in Chester County
    • Henderson
      (23 miles [37 km] to the west)
    • Montezuma
      (27 miles [43.5 km] to the west)
      • Jump to our Gazetteer entry for Montezuma
      • Montezuma is located in Chester County
    • Masseyville
      (29 miles [46.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Masseyville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Masseyville
      • Masseyville is located in Chester County
  • Hardin County
    • The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
    • Saltillo
      (4 miles [6.4 km] to the south)
      • Jump to our Gazetteer entry for Saltillo
      • Saltillo is located in Hardin County
      • Population from the 2020 Census: 521 people
    • Swift
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Swift have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Swift
      • Swift is located in Hardin County
      • Estimated population in 2014: 5,874 people
    • Sibley
      (9 miles [14.5 km] to the south)
      • Jump to our Gazetteer entry for Sibley
      • Sibley is located in Hardin County
    • Johnson Ford
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Johnson Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Johnson Ford
      • Johnson Ford is located in Hardin County
      • Estimated population in 2014: 65,813 people
    • Centerview
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Centerview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Centerview
      • Centerview is located in Hardin County
      • Estimated population in 2014: 244 people
    • New Town
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Town
      • New Town is located in Hardin County
    • Belle Meade
      (15 miles [24.1 km] to the south)
      • Note: The GPS coordinates that we are using for Belle Meade have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belle Meade
      • Belle Meade is located in Hardin County
      • Estimated population in 2014: 3,017 people
    • Savannah
      (15 miles [24.1 km] to the south)
    • Crump
      (16 miles [25.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Crump have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crump
      • Crump is located in Hardin County
      • Population from the 2020 Census: 1,459 people
      • Jump to TripAdvisor's Tourism page for Crump <2>
    • Pittsburg Landing Ferry
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Pittsburg Landing Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pittsburg Landing Ferry
      • Pittsburg Landing Ferry is located in Hardin County
      • Estimated population in 2014: 555 people
    • Nixon
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Nixon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nixon
      • Nixon is located in Hardin County
      • Estimated population in 2014: 718 people
    • Hamburg
      (24 miles [38.6 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Hamburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Hamburg
      • Hamburg is located in Hardin County
    • Lowryville
      (24 miles [38.6 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Lowryville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Lowryville
      • Lowryville is located in Hardin County
  • Henderson County
    • The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
    • Cedar Grove
      (3 miles [4.8 km] to the northwest)
      • Jump to our Gazetteer entry for Cedar Grove
      • Cedar Grove is located in Henderson County
    • Sardis
      (4 miles [6.4 km] to the west)
      • Note: The GPS coordinates that we are using for Sardis have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sardis
      • Sardis is located in Henderson County
      • Population from the 2020 Census: 400 people
      • Jump to TripAdvisor's Tourism page for Sardis <2>
    • Reagan
      (8 miles [12.9 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Reagan. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Reagan
      • Reagan is located in Henderson County
      • Jump to TripAdvisor's Tourism page for Reagan <2>
    • Chesterfield
      (13 miles [20.9 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Chesterfield. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Chesterfield
      • Chesterfield is located in Henderson County
      • Population from the 2010 Census: 469 people
    • Darden
      (13 miles [20.9 km] to the north)
      • Note: The GPS coordinates that we are using for Darden have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Darden
      • Darden is located in Henderson County
      • Population from the 2010 Census: 399 people
    • Rhodes Town
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for Rhodes Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rhodes Town
      • Rhodes Town is located in Henderson County
    • Middle Fork
      (16 miles [25.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Middle Fork. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Middle Fork
      • Middle Fork is located in Henderson County
    • Lexington
      (17 miles [27.4 km] to the northwest)
    • Huron
      (20 miles [32.2 km] to the northwest)
      • Jump to our Gazetteer entry for Huron
      • Huron is located in Henderson County
    • Poplar Springs
      (23 miles [37 km] to the north)
      • Note: The GPS coordinates that we are using for Poplar Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Poplar Springs
      • Poplar Springs is located in Henderson County
    • Farmville ‑ Historic
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for Farmville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Farmville
      • Farmville is located in Henderson County
    • Parkers Crossroads
      (25 miles [40.2 km] to the northwest)
    • Union Cross
      (25 miles [40.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Union Cross have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Union Cross
      • Union Cross is located in Henderson County
      • Estimated population in 2014: 10,666 people
  • Madison County
    • The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
    • Cisco Indian Village ‑ Historic
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Cisco Indian Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cisco Indian Village
      • Cisco Indian Village is located in Madison County
    • Pinson
      (28 miles [45.1 km] to the west)
    • Claybrook
      (29 miles [46.7 km] to the northwest)
      • Jump to our Gazetteer entry for Claybrook
      • Claybrook is located in Madison County
  • McNairy County
    • The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
    • Adamsville
      (17 miles [27.4 km] to the southwest)
    • Purdy
      (23 miles [37 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Purdy. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Purdy
      • Purdy is located in McNairy County
    • Stantonville
      (23 miles [37 km] to the southwest)
      • Jump to our Gazetteer entry for Stantonville
      • Stantonville is located in McNairy County
      • Population from the 2020 Census: 259 people
    • Finger
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Finger have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Finger
      • Finger is located in McNairy County
      • Population from the 2020 Census: 288 people
      • Jump to TripAdvisor's Tourism page for Finger <2>
    • Bethel Springs
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bethel Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bethel Springs
      • Bethel Springs is located in McNairy County
      • Population from the 2020 Census: 727 people
      • Jump to TripAdvisor's Tourism page for Bethel Springs <2>
    • Tulu
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Tulu have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tulu
      • Tulu is located in McNairy County
      • Estimated population in 2014: 18,899 people
    • Selmer
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Selmer have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Selmer
      • Selmer is located in McNairy County
      • Population from the 2020 Census: 4,280 people
      • Jump to TripAdvisor's Tourism page for Selmer <2>
    • Michie
      (29 miles [46.7 km] to the southwest)
    • Falcon
      (30 miles [48.3 km] to the southwest)
      • Jump to our Gazetteer entry for Falcon
      • Falcon is located in McNairy County
  • Perry County
    • The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
    • Mousetail ‑ Historic
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Mousetail have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mousetail
      • Mousetail is located in Perry County
    • Flatwoods
      (21 miles [33.8 km] to the east)
    • Linden
      (24 miles [38.6 km] to the northeast)
    • Beardstown
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Beardstown
      • Beardstown is located in Perry County
  • Wayne County
    • The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
    • Clifton
      (13 miles [20.9 km] to the east)
    • Lutts
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Lutts have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lutts
      • Lutts is located in Wayne County
      • Estimated population in 2014: 1,080 people
      • Jump to TripAdvisor's Tourism page for Lutts <2>
    • Slickrock Ford
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Slickrock Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Slickrock Ford
      • Slickrock Ford is located in Wayne County
      • Estimated population in 2014: 179 people
    • Waynesboro
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Waynesboro have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Waynesboro
      • Waynesboro is located in Wayne County
      • Population from the 2020 Census: 2,371 people
      • Jump to TripAdvisor's Tourism page for Waynesboro <2>
    • Ashland Ford
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Ashland Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ashland Ford
      • Ashland Ford is located in Wayne County
      • Estimated population in 2014: 4,674 people

For an expanded list of the communities that are closest to Liberty, see our County-by-County Page for Liberty.

Cemeteries Near Liberty ...

Below are cemeteries that are in the vicinity of Liberty.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Liberty covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Liberty, with the one closest to Liberty listed first.

  • Lowery Cemetery
    (Less than 2 miles to the west)
    • Jump to our Gazetteer entry for the Lowery Cemetery
    • Note: The GPS coordinates that we are using for the Lowery Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Corinth Cemetery
    (2 miles [3.2 km] to the south)
    • Jump to our Gazetteer entry for the Corinth Cemetery
    • Note: The GPS coordinates that we are using for the Corinth Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Murphy Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the Murphy Cemetery
    • Note: The GPS coordinates that we are using for the Murphy Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Shady Grove Cemetery
    (3 miles [4.8 km] to the southwest)
    • Jump to our Gazetteer entry for the Shady Grove Cemetery
    • Note: The GPS coordinates that we are using for the Shady Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Bethel Cemetery
    (3 miles [4.8 km] to the north)
    • Jump to our Gazetteer entry for the Bethel Cemetery
    • Note: The GPS coordinates that we are using for the Bethel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Gardner - Wylie Cemetery
    (3 miles [4.8 km] to the east)
  • Wiley Cemetery
    (3 miles [4.8 km] to the east)
    • Jump to our Gazetteer entry for the Wiley Cemetery
    • Note: The GPS coordinates that we are using for the Wiley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Sardis Cemetery
    (3 miles [4.8 km] to the west)
    • Jump to our Gazetteer entry for the Sardis Cemetery
    • Note: The GPS coordinates that we are using for the Sardis Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Whitelawn Cemetery
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for the Whitelawn Cemetery
    • Note: The GPS coordinates that we are using for the Whitelawn Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Saltillo Cemetery
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for the Saltillo Cemetery
    • Note: The GPS coordinates that we are using for the Saltillo Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Holland Cemetery
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for the Holland Cemetery
    • Note: The GPS coordinates that we are using for the Holland Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Shannon Cemetery
    (4 miles [6.4 km] to the southeast)
    • Jump to our Gazetteer entry for the Shannon Cemetery
    • Note: The GPS coordinates that we are using for the Shannon Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (809 more) ...
    • Kelley Cemetery
      (4 miles [6.4 km] to the southeast)
      • Jump to our Gazetteer entry for the Kelley Cemetery
      • Note: The GPS coordinates that we are using for the Kelley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Lafferty Cemetery
      (4 miles [6.4 km] to the east)
      • Jump to our Gazetteer entry for the Lafferty Cemetery
      • Note: The GPS coordinates that we are using for the Lafferty Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Adkisson Cemetery
      (4 miles [6.4 km] to the northeast)
      • Jump to our Gazetteer entry for the Adkisson Cemetery
      • Note: The GPS coordinates that we are using for the Adkisson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Liberty in the Atlas, the following 1895 communities would have been found near the current location of Liberty.

These communities are listed based on their distance from Liberty, with the one closest to Liberty listed first.

  • Thurman
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for Thurman have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thurman
    • Thurman is located in Decatur County
  • Saltillo
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for Saltillo
    • Saltillo is located in Hardin County
    • Population from the 2020 Census: 521 people
  • Point Pleasant
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Point Pleasant have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Point Pleasant
    • Point Pleasant is located in Decatur County
  • Dunbar
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for Dunbar
    • Dunbar is located in Decatur County
  • Sardis
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Sardis have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sardis
    • Sardis is located in Henderson County
    • Population from the 2020 Census: 400 people
    • Jump to TripAdvisor's Tourism page for Sardis <2>
  • Scotts Hill
    (5 miles [8 km] to the north)
  • Bath Springs
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Bath Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bath Springs
    • Bath Springs is located in Decatur County
    • Jump to TripAdvisor's Tourism page for Bath Springs <2>
  • Swift
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Swift have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Swift
    • Swift is located in Hardin County
    • Estimated population in 2014: 5,874 people
  • Reagan
    (8 miles [12.9 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Reagan. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Reagan
    • Reagan is located in Henderson County
    • Jump to TripAdvisor's Tourism page for Reagan <2>
  • Milledgeville
    (9 miles [14.5 km] to the southwest)
    • Jump to our Gazetteer entry for Milledgeville
    • Milledgeville is located in Chester County
    • Population from the 2020 Census: 267 people
  • Sibley
    (9 miles [14.5 km] to the south)
    • Jump to our Gazetteer entry for Sibley
    • Sibley is located in Hardin County
  • Cerro Gordo
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Cerro Gordo have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cerro Gordo
    • Cerro Gordo is located in Hardin County
  • Continue List   (15 more) ...
    • Decaturville
      (10 miles [16.1 km] to the northeast)
    • Shady Hill
      (10 miles [16.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Shady Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shady Hill
      • Shady Hill is located in Henderson County
    • Morris Chapel
      (11 miles [17.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Morris Chapel have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morris Chapel
      • Morris Chapel is located in Hardin County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Liberty. See our List of 1890's Communities around Liberty.

Newspapers Published in Liberty ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 39 newspapers that have been published in the area around Liberty.

Although we're unaware of any newspapers that were published in the immediate area of Liberty, there are papers which were published within 17 miles [27.4 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Liberty.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Liberty:

Unfortunately, we don't know of a website for Liberty. If you can help, please contact us through our Feedback Page.

The official website for Decatur County: www.decaturcountytn.org/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Liberty, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Liberty) to Point B.Our distance measurements begin at a specific point in Liberty. The point we use is located at these GPS coordinates - Latitude: 35.4462, Longitude: -88.2148       In this case, the coordinates for Liberty have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025