Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Haley (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Haley. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Haley is located in Bedford County.
To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Bedford County: Coffee, Lincoln, Marshall, Moore & Rutherford.
Below are the counties that are near Haley. For each of these counties, we show a sample of those communities that are closest to Haley:
- Bedford County (The home county of Haley)
- The following are listed by their distance from Haley, with the one closest to Haley listed first.
- Wartrace
(2 miles [3.2 km] to the northwest)
- Cortner
(2 miles [3.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Cortner. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Cortner
- Cortner is located in Bedford County
- Google driving directions:
- From your current location to Cortner
- From Haley to Cortner
- Normandy
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Normandy
- Normandy is located in Bedford County
- Population from the 2020 Census: 140 people
- Jump to TripAdvisor's Tourism page for Normandy <1>
- Willow Grove
(4 miles [6.4 km] to the south)
- Cascade Hollow
(4 miles [6.4 km] to the southeast)
- Raus
(6 miles [9.7 km] to the south)
- Bell Buckle
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <1>
- Shelbyville
(8 miles [12.9 km] to the west)
- Anchor Mill ‑ Historic
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Anchor Mill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Anchor Mill
- Anchor Mill is located in Bedford County
- Google driving directions:
- From your current location to Anchor Mill
- From Haley to Anchor Mill
- Vannatta
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vannatta
- Vannatta is located in Bedford County
- Estimated population in 2014: 398 people
- Longview
(16 miles [25.7 km] to the northwest)
- Whitaker
(17 miles [27.4 km] to the west)
- Cannon County
- The following are listed by their distance from Haley, with the one closest to Haley listed first.
- Hollow Springs
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Hollow Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hollow Springs
- Hollow Springs is located in Cannon County
- Estimated population in 2014: 706 people
- Bradyville
(19 miles [30.6 km] to the northeast)
- Burgen
(19 miles [30.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Burgen. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Burgen
- Burgen is located in Cannon County
- Google driving directions:
- From your current location to Burgen
- From Haley to Burgen
- Burt
(21 miles [33.8 km] to the northeast)
- Manus Town ‑ Historic
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Manus Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manus Town
- Manus Town is located in Cannon County
- Bluewing
(27 miles [43.5 km] to the northeast)
- Woodbury
(27 miles [43.5 km] to the northeast)
- Thomas Town ‑ Historic
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Thomas Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thomas Town
- Thomas Town is located in Cannon County
- Coffee County
- The following are listed by their distance from Haley, with the one closest to Haley listed first.
- Busy Corner
(8 miles [12.9 km] to the east)
- Homaway Village
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Homaway Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Homaway Village
- Homaway Village is located in Coffee County
- Beechgrove
(10 miles [16.1 km] to the north)
- Tullahoma
(10 miles [16.1 km] to the southeast)
- Southgate Park
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Southgate Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Southgate Park
- Southgate Park is located in Coffee County
- Estimated population in 2014: 2,284 people
- Belmont
(12 miles [19.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Belmont. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Belmont
- Belmont is located in Coffee County
- Google driving directions:
- From your current location to Belmont
- From Haley to Belmont
- Manchester
(12 miles [19.3 km] to the east)
- Royal Oaks
(12 miles [19.3 km] to the east)
- New Union
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for New Union have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Union
- New Union is located in Coffee County
- Population from the 2010 Census: 1,431 people
- Teal ‑ Historic
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Teal have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Teal
- Teal is located in Coffee County
- Gossburg
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Gossburg. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Gossburg
- Gossburg is located in Coffee County
- Google driving directions:
- From your current location to Gossburg
- From Haley to Gossburg
- Forest Mill
(15 miles [24.1 km] to the east)
- Franklin County
- The following are listed by their distance from Haley, with the one closest to Haley listed first.
- Estill Springs
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Estill Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Estill Springs
- Estill Springs is located in Franklin County
- Population from the 2020 Census: 2,040 people
- Jump to TripAdvisor's Tourism page for Estill Springs <1>
- Winchester Springs
(18 miles [29 km] to the southeast)
- Garner Ford
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Garner Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garner Ford
- Garner Ford is located in Franklin County
- Estimated population in 2014: 309 people
- Decherd
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Decherd have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Decherd
- Decherd is located in Franklin County
- Population from the 2020 Census: 2,372 people
- Jump to TripAdvisor's Tourism page for Decherd <1>
- Lexie
(23 miles [37 km] to the south)
- Winchester
(23 miles [37 km] to the southeast)
- Greenhaw
(24 miles [38.6 km] to the southeast)
- Liberty
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liberty
- Liberty is located in Franklin County
- Estimated population in 2014: 318 people
- Cowan
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Cowan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cowan
- Cowan is located in Franklin County
- Population from the 2020 Census: 1,668 people
- Jump to TripAdvisor's Tourism page for Cowan <1>
- Beans Creek
(29 miles [46.7 km] to the south)
- Sewanee
(29 miles [46.7 km] to the southeast)
- Huntland
(30 miles [48.3 km] to the south)
- Grundy County
- Pelham
(27 miles [43.5 km] to the southeast)
- Lincoln County
- The following are listed by their distance from Haley, with the one closest to Haley listed first.
- Booneville
(17 miles [27.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Booneville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Booneville
- Booneville is located in Lincoln County
- Google driving directions:
- From your current location to Booneville
- From Haley to Booneville
- Gattistown
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Gattistown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gattistown
- Gattistown is located in Lincoln County
- Estimated population in 2014: 4,158 people
- Belleville
(20 miles [32.2 km] to the southwest)
- Petersburg
(21 miles [33.8 km] to the southwest)
- Elk Mill Village
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Elk Mill Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elk Mill Village
- Elk Mill Village is located in Lincoln County
- Clarks Ferry
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Clarks Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarks Ferry
- Clarks Ferry is located in Lincoln County
- Estimated population in 2014: 387 people
- Fayetteville
(27 miles [43.5 km] to the southwest)
- Hughey
(28 miles [45.1 km] to the southwest)
- Corder Crossroads
(29 miles [46.7 km] to the south)
- Flintville
(30 miles [48.3 km] to the south)
- Boonshill
(30 miles [48.3 km] to the southwest)
- Marshall County
- The following are listed by their distance from Haley, with the one closest to Haley listed first.
- Talley
(22 miles [35.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Talley. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Talley
- Talley is located in Marshall County
- Google driving directions:
- From your current location to Talley
- From Haley to Talley
- Belfast
(22 miles [35.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Belfast. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Belfast
- Belfast is located in Marshall County
- Google driving directions:
- From your current location to Belfast
- From Haley to Belfast
- Oak Hill
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Marshall County
- Chapel Hill
(23 miles [37 km] to the northwest)
- Orrs
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Orrs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orrs
- Orrs is located in Marshall County
- Estimated population in 2014: 123 people
- Holts Corner
(25 miles [40.2 km] to the northwest)
- Verona
(25 miles [40.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Verona. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Verona
- Verona is located in Marshall County
- Google driving directions:
- From your current location to Verona
- From Haley to Verona
- Caney Spring
(26 miles [41.8 km] to the west)
- Cochran
(27 miles [43.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Cochran. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Cochran
- Cochran is located in Marshall County
- Google driving directions:
- From your current location to Cochran
- From Haley to Cochran
- Lewisburg
(27 miles [43.5 km] to the west)
- Delina
(28 miles [45.1 km] to the southwest)
- Berlin
(28 miles [45.1 km] to the west)
- Moore County
- The following are listed by their distance from Haley, with the one closest to Haley listed first.
- Countyline
(11 miles [17.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Countyline. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Countyline
- Countyline is located in Moore County
- Google driving directions:
- From your current location to Countyline
- From Haley to Countyline
- Lynchburg
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Lynchburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynchburg
- Lynchburg is located in Moore County
- Jump to TripAdvisor's Tourism page for Lynchburg <1>
- Ridgeville
(14 miles [22.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Ridgeville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Ridgeville
- Ridgeville is located in Moore County
- Google driving directions:
- From your current location to Ridgeville
- From Haley to Ridgeville
- Rutherford County
- The following are listed by their distance from Haley, with the one closest to Haley listed first.
- Plainview
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Rutherford County
- Midland
(15 miles [24.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Midland. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Midland
- Midland is located in Rutherford County
- Google driving directions:
- From your current location to Midland
- From Haley to Midland
- Rucker
(18 miles [29 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Rucker. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rucker
- Rucker is located in Rutherford County
- Google driving directions:
- From your current location to Rucker
- From Haley to Rucker
- Burns Place
(19 miles [30.6 km] to the north)
- Dillton
(21 miles [33.8 km] to the north)
- Concord
(22 miles [35.4 km] to the northwest)
- Kittrell
(23 miles [37 km] to the north)
- Readyville
(24 miles [38.6 km] to the north)
- Murfreesboro
(25 miles [40.2 km] to the north)
- Eagleville
(25 miles [40.2 km] to the northwest)
- Snell ‑ Historic
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Snell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Snell
- Snell is located in Rutherford County
- Estimated population in 2014: 1,361 people
- Allisona
(28 miles [45.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Allisona. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Allisona
- Allisona is located in Rutherford County
- Google driving directions:
- From your current location to Allisona
- From Haley to Allisona
- Warren County
- The following are listed by their distance from Haley, with the one closest to Haley listed first.
- Morrison
(23 miles [37 km] to the east)
- Trousdale
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Trousdale. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Trousdale
- Trousdale is located in Warren County
- Google driving directions:
- From your current location to Trousdale
- From Haley to Trousdale
- Viola
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Viola
- Viola is located in Warren County
- Population from the 2020 Census: 141 people
- Jump to TripAdvisor's Tourism page for Viola <1>
- Centertown
(27 miles [43.5 km] to the northeast)
- Daylight
(30 miles [48.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Daylight. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Daylight
- Daylight is located in Warren County
- Google driving directions:
- From your current location to Daylight
- From Haley to Daylight
- Williamson County
- College Grove
(29 miles [46.7 km] to the northwest)
For an expanded list of the communities that are closest to Haley, see our County-by-County Page for Haley.
Cemeteries Near Haley ...
Below are cemeteries that are in the vicinity of Haley.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Haley covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Haley, with the one closest to Haley listed first.
- Eason Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Eason Cemetery
- Note: The GPS coordinates that we are using for the Eason Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Murphy Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Murphy Cemetery
- Note: The GPS coordinates that we are using for the Murphy Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Holt Cemetery
(Less than 2 miles to the east)
- Jump to our Gazetteer entry for the Holt Cemetery
- Note: The GPS coordinates that we are using for the Holt Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Kimbro Cemetery
(Less than 2 miles to the southwest)
- Jump to our Gazetteer entry for the Kimbro Cemetery
- Note: The GPS coordinates that we are using for the Kimbro Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Hooser Cemetery
(Less than 2 miles to the southwest)
- Jump to our Gazetteer entry for the Hooser Cemetery
- Note: The GPS coordinates that we are using for the Hooser Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Three Forks Cemetery
(Less than 2 miles to the southwest)
- Jump to our Gazetteer entry for the Three Forks Cemetery
- Note: The GPS coordinates that we are using for the Three Forks Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Maupin Cemetery
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for the Maupin Cemetery
- Note: The GPS coordinates that we are using for the Maupin Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Maupin Cemetery
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for the Maupin Cemetery
- Note: The GPS coordinates that we are using for the Maupin Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Troxler Cemetery
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for the Troxler Cemetery
- Note: The GPS coordinates that we are using for the Troxler Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Russell Cemetery
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for the Russell Cemetery
- Note: The GPS coordinates that we are using for the Russell Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Hall - Thompson Cemetery
(Less than 2 miles to the east)
- Jump to our Gazetteer entry for the Hall - Thompson Cemetery
- Note: The GPS coordinates that we are using for the Hall - Thompson Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Erwin Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Erwin Cemetery
- Note: The GPS coordinates that we are using for the Erwin Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Continue List (1751 more) ...
- Davidson Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Davidson Cemetery
- Note: The GPS coordinates that we are using for the Davidson Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Cleveland Cemetery
(2 miles [3.2 km] to the north)
- Jump to our Gazetteer entry for the Cleveland Cemetery
- Note: The GPS coordinates that we are using for the Cleveland Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Hailey Cemetery
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for the Hailey Cemetery
- Note: The GPS coordinates that we are using for the Hailey Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>
The Rand McNally Atlas shows that Haley had a population of 26 people in 1895 with a post office and railroad service.
These communities are listed based on their distance from Haley, with the one closest to Haley listed first.
- Cortner
(2 miles [3.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Cortner. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Cortner
- Cortner is located in Bedford County
- Google driving directions:
- From your current location to Cortner
- From Haley to Cortner
- Wartrace
(2 miles [3.2 km] to the northwest)
- Normandy
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Normandy
- Normandy is located in Bedford County
- Population from the 2020 Census: 140 people
- Jump to TripAdvisor's Tourism page for Normandy <1>
- Singleton
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Singleton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Singleton
- Singleton is located in Bedford County
- Fairfield
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield
- Fairfield is located in Bedford County
- Bell Buckle
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <1>
- Flat Creek
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Flat Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flat Creek
- Flat Creek is located in Bedford County
- Noah
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Noah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Noah
- Noah is located in Coffee County
- Shelbyville
(8 miles [12.9 km] to the west)
- Tullahoma
(10 miles [16.1 km] to the southeast)
- Beechgrove
(10 miles [16.1 km] to the north)
- Countyline
(11 miles [17.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Countyline. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Countyline
- Countyline is located in Moore County
- Google driving directions:
- From your current location to Countyline
- From Haley to Countyline
- Continue List (14 more) ...
- Belmont
(12 miles [19.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Belmont. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Belmont
- Belmont is located in Coffee County
- Google driving directions:
- From your current location to Belmont
- From Haley to Belmont
- Fosterville
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Fosterville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fosterville
- Fosterville is located in Rutherford County
- Manchester
(12 miles [19.3 km] to the east)
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Haley. See our List of 1890's Communities around Haley.
Newspapers Published in Haley ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 72 newspapers that have been published in the area around Haley.
Although we're unaware of any newspapers that were published in the immediate area of Haley, there are papers which were published within 14 miles [22.5 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Haley.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Haley:
- Websites specific to Tennessee
- Pages specific to Bedford County
- Genealogy information for nearby counties
- Cannon County
- Coffee County
- Franklin County
- Grundy County
- Lincoln County
- Marshall County
- Moore County
- Rutherford County
- Warren County
- Williamson County
- Cemetery Information and Directories for Tennessee
Off-the-Road Links ...
Unfortunately, we don't know of a website for Haley. If you can help, please contact us through our Feedback Page.
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Haley, please let us know so that we can improve our accuracy. |
<5> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Haley) to Point B.Our distance measurements begin at a specific point in Haley. The point we use is located at these GPS coordinates - Latitude: 35.4884, Longitude: -86.3110 In this case, the coordinates for Haley have been provided by the Geographic Names Information System (GNIS). |