|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Howland Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Howland Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Howland Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Plainview
(Less than 2 miles to the west)
- Plainview is also located in Rutherford County
- Jump to our Gazetteer entry for Plainview
- Burns Place
(4 miles [6.4 km] to the north)
- Burns Place is also located in Rutherford County
- Jump to our Gazetteer entry for Burns Place
- Rucker
(5 miles [8 km] to the northwest)
- Rucker is also located in Rutherford County
- Jump to our Gazetteer entry for Rucker
- Beechgrove
(6 miles [9.7 km] to the southeast)
- Gossburg
(6 miles [9.7 km] to the east)
- Gossburg is located in Coffee County
- Jump to our Gazetteer entry for Gossburg
- Bell Buckle
(7 miles [11.3 km] to the south)
- Dillton
(7 miles [11.3 km] to the north)
- Dillton is also located in Rutherford County
- Jump to our Gazetteer entry for Dillton
- Midland
(9 miles [14.5 km] to the west)
- Midland is also located in Rutherford County
- Jump to our Gazetteer entry for Midland
- Bradyville
(9 miles [14.5 km] to the east)
- Bradyville is located in Cannon County
- Jump to our Gazetteer entry for Bradyville
- Kittrell
(9 miles [14.5 km] to the northeast)
- Kittrell is also located in Rutherford County
- Jump to our Gazetteer entry for Kittrell
- Vannatta
(10 miles [16.1 km] to the southwest)
- Vannatta is located in Bedford County
- Jump to our Gazetteer entry for Vannatta
- Estimated population in 2014: 398 people
- Wartrace
(11 miles [17.7 km] to the south)
- Murfreesboro
(11 miles [17.7 km] to the north)
- Burgen
(11 miles [17.7 km] to the east)
- Burgen is located in Cannon County
- Jump to our Gazetteer entry for Burgen
- Burt
(11 miles [17.7 km] to the northeast)
- Burt is located in Cannon County
- Jump to our Gazetteer entry for Burt
- Longview
(12 miles [19.3 km] to the west)
- Longview is located in Bedford County
- Jump to our Gazetteer entry for Longview
- Readyville
(12 miles [19.3 km] to the northeast)
- Concord
(13 miles [20.9 km] to the west)
- Haley
(14 miles [22.5 km] to the south)
- Haley is located in Bedford County
- Jump to our Gazetteer entry for Haley
- Compton
(14 miles [22.5 km] to the north)
- Compton is also located in Rutherford County
- Jump to our Gazetteer entry for Compton
- Busy Corner
(14 miles [22.5 km] to the southeast)
- Busy Corner is located in Coffee County
- Jump to our Gazetteer entry for Busy Corner
- Snell ‑ Historic
(15 miles [24.1 km] to the northwest)
- Snell was located in Rutherford County
- Jump to our Gazetteer entry for Snell
- Estimated population in 2014: 1,361 people
- Unionville
(16 miles [25.7 km] to the west)
- Anchor Mill ‑ Historic
(16 miles [25.7 km] to the southwest)
- Anchor Mill was located in Bedford County
- Jump to our Gazetteer entry for Anchor Mill
- Shelbyville
(16 miles [25.7 km] to the southwest)
- Cortner
(16 miles [25.7 km] to the south)
- Cortner is located in Bedford County
- Jump to our Gazetteer entry for Cortner
- Teal ‑ Historic
(16 miles [25.7 km] to the southeast)
- Teal was located in Coffee County
- Jump to our Gazetteer entry for Teal
- Naola ‑ Historic
(16 miles [25.7 km] to the east)
- Naola was located in Coffee County
- Jump to our Gazetteer entry for Naola
- Woodbury
(16 miles [25.7 km] to the northeast)
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Howland Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|