|
TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Johnstown. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Johnstown.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Johnstown - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 80 communities listed:
- Acme
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Acme have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Acme
- Acme is located in Westmoreland County
- Jump to TripAdvisor's Tourism page for Acme <3>
- Altoona
(30 miles [48.3 km] to the northeast)
- Alum Bank
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Alum Bank have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alum Bank
- Alum Bank is located in Bedford County
- Jump to TripAdvisor's Tourism page for Alum Bank <3>
- Armagh
(10 miles [16.1 km] to the northwest)
- Ashville
(25 miles [40.2 km] to the northeast)
- Berlin
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Berlin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berlin
- Berlin is located in Somerset County
- Population from the 2020 Census: 1,931 people
- Jump to TripAdvisor's Tourism page for Berlin <3>
- Blairsville
(19 miles [30.6 km] to the west)
- Bolivar
(13 miles [20.9 km] to the west)
- Boswell
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Boswell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boswell
- Boswell is located in Somerset County
- Population from the 2020 Census: 1,180 people
- Jump to TripAdvisor's Tourism page for Boswell <3>
- Brownstown
(Less than 2 miles to the northwest)
- Calumet
(30 miles [48.3 km] to the west)
- Carrolltown
(22 miles [35.4 km] to the northeast)
- Central City
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Central City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Central City
- Central City is located in Somerset County
- Population from the 2020 Census: 1,021 people
- Jump to TripAdvisor's Tourism page for Central City <3>
- Champion
(28 miles [45.1 km] to the southwest)
- Clarksburg
(28 miles [45.1 km] to the northwest)
- Claysburg
(24 miles [38.6 km] to the east)
- Clymer
(24 miles [38.6 km] to the north)
- Colver
(16 miles [25.7 km] to the northeast)
- Commodore
(26 miles [41.8 km] to the north)
- Coral
(18 miles [29 km] to the northwest)
- Crabtree
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Crabtree have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crabtree
- Crabtree is located in Westmoreland County
- Jump to TripAdvisor's Tourism page for Crabtree <3>
- Cresson
(19 miles [30.6 km] to the northeast)
- Davidsville
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Davidsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Davidsville
- Davidsville is located in Somerset County
- Jump to TripAdvisor's Tourism page for Davidsville <3>
- Derry
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Derry have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Derry
- Derry is located in Westmoreland County
- Population from the 2020 Census: 2,495 people
- Jump to TripAdvisor's Tourism page for Derry <3>
- Dilltown
(10 miles [16.1 km] to the northwest)
- Donegal
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Donegal have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Donegal
- Donegal is located in Westmoreland County
- Population from the 2020 Census: 109 people
- Jump to TripAdvisor's Tourism page for Donegal <3>
- Duncansville
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Duncansville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Duncansville
- Duncansville is located in Blair County
- Population from the 2020 Census: 1,148 people
- Jump to TripAdvisor's Tourism page for Duncansville <3>
- East Freedom
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for East Freedom have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Freedom
- East Freedom is located in Blair County
- Jump to TripAdvisor's Tourism page for East Freedom <3>
- Ebensburg
(15 miles [24.1 km] to the northeast)
- Elton
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Elton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elton
- Elton is located in Cambria County
- Jump to TripAdvisor's Tourism page for Elton <3>
- Ferndale
(2 miles [3.2 km] to the south)
- Fishertown
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Fishertown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fishertown
- Fishertown is located in Bedford County
- Jump to TripAdvisor's Tourism page for Fishertown <3>
- Friedens
(19 miles [30.6 km] to the south)
- Gallitzin
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Gallitzin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gallitzin
- Gallitzin is located in Cambria County
- Population from the 2020 Census: 1,514 people
- Jump to TripAdvisor's Tourism page for Gallitzin <3>
- Hastings
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Hastings have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hastings
- Hastings is located in Cambria County
- Population from the 2020 Census: 1,145 people
- Jump to TripAdvisor's Tourism page for Hastings <3>
- Hollidaysburg
(28 miles [45.1 km] to the east)
- Hollsopple
(8 miles [12.9 km] to the south)
- Homer City
(19 miles [30.6 km] to the northwest)
- Imler
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Imler have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Imler
- Imler is located in Bedford County
- Jump to TripAdvisor's Tourism page for Imler <3>
- Indiana
(23 miles [37 km] to the northwest)
- Jennerstown
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Jennerstown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jennerstown
- Jennerstown is located in Somerset County
- Population from the 2020 Census: 637 people
- Jump to TripAdvisor's Tourism page for Jennerstown <3>
- Jones Mills
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Jones Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jones Mills
- Jones Mills is located in Westmoreland County
- Jump to TripAdvisor's Tourism page for Jones Mills <3>
- Latrobe
(24 miles [38.6 km] to the west)
- Laughlintown
(16 miles [25.7 km] to the southwest)
- Ligonier
(17 miles [27.4 km] to the west)
- Loretto
(19 miles [30.6 km] to the northeast)
- Loysburg
(30 miles [48.3 km] to the east)
- Manns Choice
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Manns Choice have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manns Choice
- Manns Choice is located in Bedford County
- Population from the 2020 Census: 283 people
- Jump to TripAdvisor's Tourism page for Manns Choice <3>
- Nanty Glo
(11 miles [17.7 km] to the northeast)
- New Alexandria
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for New Alexandria have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Alexandria
- New Alexandria is located in Westmoreland County
- Population from the 2020 Census: 522 people
- Jump to TripAdvisor's Tourism page for New Alexandria <3>
- New Derry
(20 miles [32.2 km] to the west)
- New Florence
(8 miles [12.9 km] to the northwest)
- New Paris
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for New Paris have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Paris
- New Paris is located in Bedford County
- Population from the 2020 Census: 172 people
- Jump to TripAdvisor's Tourism page for New Paris <3>
- Newry
(25 miles [40.2 km] to the east)
- Osterburg
(23 miles [37 km] to the southeast)
- Palmertown
(17 miles [27.4 km] to the northwest)
- Patton
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Patton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patton
- Patton is located in Cambria County
- Population from the 2020 Census: 1,576 people
- Jump to TripAdvisor's Tourism page for Patton <3>
- Penn Run
(20 miles [32.2 km] to the north)
- Pleasant Unity
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Pleasant Unity have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Unity
- Pleasant Unity is located in Westmoreland County
- Jump to TripAdvisor's Tourism page for Pleasant Unity <3>
- Portage
(13 miles [20.9 km] to the east)
- Rector
(19 miles [30.6 km] to the southwest)
- Roaring Spring
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Roaring Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roaring Spring
- Roaring Spring is located in Blair County
- Population from the 2020 Census: 2,399 people
- Jump to TripAdvisor's Tourism page for Roaring Spring <3>
- Rockwood
(30 miles [48.3 km] to the southwest)
- Saltsburg
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Saltsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saltsburg
- Saltsburg is located in Indiana County
- Population from the 2020 Census: 800 people
- Jump to TripAdvisor's Tourism page for Saltsburg <3>
- Schellsburg
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Schellsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Schellsburg
- Schellsburg is located in Bedford County
- Population from the 2020 Census: 317 people
- Jump to TripAdvisor's Tourism page for Schellsburg <3>
- Seven Springs
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Seven Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seven Springs
- Seven Springs is located in Fayette County
- Population from the 2020 Census: 19 people
- Jump to TripAdvisor's Tourism page for Seven Springs <3>
- Seward
(8 miles [12.9 km] to the northwest)
- Shanksville
(21 miles [33.8 km] to the south)
- Shelocta
(30 miles [48.3 km] to the northwest)
- Sidman
(8 miles [12.9 km] to the east)
- Somerset
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Somerset have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Somerset
- Somerset is located in Somerset County
- Population from the 2020 Census: 5,817 people
- Jump to TripAdvisor's Tourism page for Somerset <3>
- South Fork
(7 miles [11.3 km] to the east)
- Stahlstown
(24 miles [38.6 km] to the southwest)
- Stoystown
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Stoystown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stoystown
- Stoystown is located in Somerset County
- Population from the 2020 Census: 317 people
- Jump to TripAdvisor's Tourism page for Stoystown <3>
- Strongstown
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Strongstown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Strongstown
- Strongstown is located in Indiana County
- Jump to TripAdvisor's Tourism page for Strongstown <3>
- Summerhill
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Summerhill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Summerhill
- Summerhill is located in Cambria County
- Population from the 2020 Census: 439 people
- Jump to TripAdvisor's Tourism page for Summerhill <3>
- Twin Rocks
(12 miles [19.3 km] to the north)
- Wilmore
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Wilmore have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilmore
- Wilmore is located in Cambria County
- Population from the 2020 Census: 202 people
- Jump to TripAdvisor's Tourism page for Wilmore <3>
- Windber
(7 miles [11.3 km] to the southeast)
- Youngstown
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Youngstown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Youngstown
- Youngstown is located in Westmoreland County
- Population from the 2020 Census: 302 people
- Jump to TripAdvisor's Tourism page for Youngstown <3>
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Johnstown) to Point B.Our distance measurements begin at a specific point in Johnstown. The point we use is located at these GPS coordinates - Latitude: 40.3260, Longitude: -78.9199 |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|