RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> Commonwealth of Pennsylvania >> Blair County >> Culp >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Pennsylvania

The Commemorative Quarter for Pennsylvania





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Culp (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Culp. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Culp is located in Blair County.

To see how the shape of Pennsylvania's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Blair County: Bedford, Cambria, Centre & Huntingdon.

Below are the counties that are near Culp. For each of these counties, we show a sample of those communities that are closest to Culp:

  • Blair County     (The home county of Culp)
    • The following are listed by their distance from Culp, with the one closest to Culp listed first.
    • Tipton
      (4 miles [6.4 km] to the northwest)
    • Bellwood
      (4 miles [6.4 km] to the west)
      • Note: The GPS coordinates that we are using for Bellwood have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bellwood
      • Bellwood is located in Blair County
      • Population from the 2020 Census: 1,751 people
      • Jump to TripAdvisor's Tourism page for Bellwood <1>
    • Grazierville
      (5 miles [8 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Grazierville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Grazierville
      • Grazierville is located in Blair County
      • Google driving directions:
      • From your current location to Grazierville
      • From Culp to Grazierville
    • Tyrone Forge
      (5 miles [8 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Tyrone Forge. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Tyrone Forge
      • Tyrone Forge is located in Blair County
      • Google driving directions:
      • From your current location to Tyrone Forge
      • From Culp to Tyrone Forge
    • Tyrone
      (6 miles [9.7 km] to the north)
      • Note: The GPS coordinates that we are using for Tyrone have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tyrone
      • Tyrone is located in Blair County
      • Population from the 2020 Census: 5,095 people
      • Jump to TripAdvisor's Tourism page for Tyrone <1>
    • Flowing Spring
      (7 miles [11.3 km] to the south)
    • Franklin Forge
      (7 miles [11.3 km] to the south)
    • Springfield Junction
      (7 miles [11.3 km] to the south)
    • Williamsburg
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Williamsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Williamsburg
      • Williamsburg is located in Blair County
      • Population from the 2020 Census: 1,167 people
      • Jump to TripAdvisor's Tourism page for Williamsburg <1>
    • Covedale
      (8 miles [12.9 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Covedale. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Covedale
      • Covedale is located in Blair County
      • Google driving directions:
      • From your current location to Covedale
      • From Culp to Covedale
    • Altoona
      (8 miles [12.9 km] to the southwest)
    • Highland Fling
      (9 miles [14.5 km] to the west)
  • Bedford County
    • The following are listed by their distance from Culp, with the one closest to Culp listed first.
    • King
      (25 miles [40.2 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for King. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for King
      • King is located in Bedford County
      • Google driving directions:
      • From your current location to King
      • From Culp to King
    • Maria
      (26 miles [41.8 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Maria. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Maria
      • Maria is located in Bedford County
      • Google driving directions:
      • From your current location to Maria
      • From Culp to Maria
    • Waterside
      (27 miles [43.5 km] to the south)
    • Riddlesburg
      (28 miles [45.1 km] to the south)
    • Pavia
      (28 miles [45.1 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Pavia. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Pavia
      • Pavia is located in Bedford County
      • Google driving directions:
      • From your current location to Pavia
      • From Culp to Pavia
    • Loysburg
      (29 miles [46.7 km] to the south)
    • New Enterprise
      (29 miles [46.7 km] to the south)
    • Woodbury
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Woodbury have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodbury
      • Woodbury is located in Bedford County
      • Population from the 2020 Census: 265 people
      • Jump to TripAdvisor's Tourism page for Woodbury <1>
    • Marble City
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Marble City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marble City
      • Marble City is located in Bedford County
    • Saxton
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Saxton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saxton
      • Saxton is located in Bedford County
      • Population from the 2020 Census: 679 people
      • Jump to TripAdvisor's Tourism page for Saxton <1>
  • Cambria County
    • The following are listed by their distance from Culp, with the one closest to Culp listed first.
    • Buckhorn
      (11 miles [17.7 km] to the west)
    • Dean
      (12 miles [19.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Dean. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Dean
      • Dean is located in Cambria County
      • Google driving directions:
      • From your current location to Dean
      • From Culp to Dean
    • Dysart
      (13 miles [20.9 km] to the west)
    • Fallentimber
      (14 miles [22.5 km] to the northwest)
    • Amsbry
      (15 miles [24.1 km] to the west)
    • Ashville
      (15 miles [24.1 km] to the west)
    • Gallitzin
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Gallitzin have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gallitzin
      • Gallitzin is located in Cambria County
      • Population from the 2020 Census: 1,514 people
      • Jump to TripAdvisor's Tourism page for Gallitzin <1>
    • Flinton
      (16 miles [25.7 km] to the northwest)
    • Tunnelhill
      (16 miles [25.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Tunnelhill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tunnelhill
      • Tunnelhill is located in Cambria County
      • Population from the 2020 Census: 327 people
    • Spindley City
      (16 miles [25.7 km] to the west)
      • Note: The GPS coordinates that we are using for Spindley City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spindley City
      • Spindley City is located in Cambria County
    • Summit
      (18 miles [29 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Summit. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Summit
      • Summit is located in Cambria County
      • Google driving directions:
      • From your current location to Summit
      • From Culp to Summit
    • Chest Springs
      (18 miles [29 km] to the west)
  • Centre County
    • The following are listed by their distance from Culp, with the one closest to Culp listed first.
    • Marengo
      (15 miles [24.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Marengo. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Marengo
      • Marengo is located in Centre County
      • Google driving directions:
      • From your current location to Marengo
      • From Culp to Marengo
    • Sandy Ridge
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for Sandy Ridge have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sandy Ridge
      • Sandy Ridge is located in Centre County
    • Musser
      (17 miles [27.4 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Musser. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Musser
      • Musser is located in Centre County
      • Google driving directions:
      • From your current location to Musser
      • From Culp to Musser
    • New Town
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Town
      • New Town is located in Centre County
    • Port Matilda
      (18 miles [29 km] to the northeast)
      • Note: The GPS coordinates that we are using for Port Matilda have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Port Matilda
      • Port Matilda is located in Centre County
      • Population from the 2020 Census: 582 people
      • Jump to TripAdvisor's Tourism page for Port Matilda <1>
    • Ramblewood
      (18 miles [29 km] to the northeast)
      • Note: The GPS coordinates that we are using for Ramblewood have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ramblewood
      • Ramblewood is located in Centre County
    • Fairbrook
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Fairbrook have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairbrook
      • Fairbrook is located in Centre County
    • Stormstown
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Stormstown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stormstown
      • Stormstown is located in Centre County
    • Glass City
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Glass City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glass City
      • Glass City is located in Centre County
    • South Philipsburg
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for South Philipsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for South Philipsburg
      • South Philipsburg is located in Centre County
    • North Philipsburg
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for North Philipsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Philipsburg
      • North Philipsburg is located in Centre County
    • Philipsburg
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Philipsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Philipsburg
      • Philipsburg is located in Centre County
      • Population from the 2020 Census: 2,678 people
      • Jump to TripAdvisor's Tourism page for Philipsburg <1>
  • Clearfield County
    • The following are listed by their distance from Culp, with the one closest to Culp listed first.
    • Ginter
      (14 miles [22.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Ginter. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Ginter
      • Ginter is located in Clearfield County
      • Google driving directions:
      • From your current location to Ginter
      • From Culp to Ginter
    • Utahville
      (15 miles [24.1 km] to the northwest)
    • Ramey
      (16 miles [25.7 km] to the northwest)
    • Hegarty Crossroads
      (17 miles [27.4 km] to the northwest)
    • Houtzdale
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Houtzdale have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Houtzdale
      • Houtzdale is located in Clearfield County
      • Population from the 2020 Census: 739 people
      • Jump to TripAdvisor's Tourism page for Houtzdale <1>
    • Brisbin
      (18 miles [29 km] to the north)
    • Parsonsville
      (18 miles [29 km] to the north)
    • Blain City
      (18 miles [29 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Blain City. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Blain City
      • Blain City is located in Clearfield County
      • Google driving directions:
      • From your current location to Blain City
      • From Culp to Blain City
    • Coalport
      (18 miles [29 km] to the northwest)
    • Lyleville
      (18 miles [29 km] to the northwest)
    • Rosebud
      (18 miles [29 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Rosebud. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Rosebud
      • Rosebud is located in Clearfield County
      • Google driving directions:
      • From your current location to Rosebud
      • From Culp to Rosebud
    • Glen Hope
      (19 miles [30.6 km] to the northwest)
  • Huntingdon County
  • Mifflin County
    • The following are listed by their distance from Culp, with the one closest to Culp listed first.
    • Allensville
      (23 miles [37 km] to the east)
    • Atkinson Mills
      (24 miles [38.6 km] to the east)
    • Kistler
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Kistler have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kistler
      • Kistler is located in Mifflin County
      • Population from the 2020 Census: 315 people
    • Menno
      (25 miles [40.2 km] to the east)
    • Newton Hamilton
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Newton Hamilton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Newton Hamilton
      • Newton Hamilton is located in Mifflin County
      • Population from the 2020 Census: 198 people
    • McVeytown
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for McVeytown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McVeytown
      • McVeytown is located in Mifflin County
      • Population from the 2020 Census: 330 people
      • Jump to TripAdvisor's Tourism page for McVeytown <1>
    • Belleville
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Belleville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belleville
      • Belleville is located in Mifflin County
      • Jump to TripAdvisor's Tourism page for Belleville <1>
    • Mattawana
      (28 miles [45.1 km] to the east)

For an expanded list of the communities that are closest to Culp, see our County-by-County Page for Culp.

Cemeteries Near Culp ...

Below are cemeteries that are in the vicinity of Culp.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Culp covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Culp, with the one closest to Culp listed first.

  • St. John Cemetery
    (Less than 2 miles to the northeast)
    • Jump to our Gazetteer entry for the St. John Cemetery
    • Note: The GPS coordinates that we are using for the St. John Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Williams Cemetery
    (2 miles [3.2 km] to the southeast)
    • Jump to our Gazetteer entry for the Williams Cemetery
    • Note: The GPS coordinates that we are using for the Williams Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Logan Valley Cemetery
    (3 miles [4.8 km] to the west)
  • Charlottsville Cemetery
    (4 miles [6.4 km] to the north)
    • Jump to our Gazetteer entry for the Charlottsville Cemetery
    • Note: The GPS coordinates that we are using for the Charlottsville Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Dysart Cemetery
    (4 miles [6.4 km] to the northwest)
  • Birmingham Cemetery
    (5 miles [8 km] to the northeast)
    • Jump to our Gazetteer entry for the Birmingham Cemetery
    • Note: The GPS coordinates that we are using for the Birmingham Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Antis Cemetery
    (5 miles [8 km] to the west)
  • Greenwood Cemetery
    (6 miles [9.7 km] to the southwest)
    • Jump to our Gazetteer entry for the Greenwood Cemetery
    • Note: The GPS coordinates that we are using for the Greenwood Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Shaffersville Cemetery
    (6 miles [9.7 km] to the east)
    • Jump to our Gazetteer entry for the Shaffersville Cemetery
    • Note: The GPS coordinates that we are using for the Shaffersville Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Waterstreet Cemetery
    (6 miles [9.7 km] to the east)
    • Jump to our Gazetteer entry for the Waterstreet Cemetery
    • Note: The GPS coordinates that we are using for the Waterstreet Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Eastlawn Cemetery
    (6 miles [9.7 km] to the north)
    • Jump to our Gazetteer entry for the Eastlawn Cemetery
    • Note: The GPS coordinates that we are using for the Eastlawn Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Gray Memorial Field
    (6 miles [9.7 km] to the north)
    • Jump to our Gazetteer entry for the Gray Memorial Field
    • Note: The GPS coordinates that we are using for the Gray Memorial Field have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Continue List   (323 more) ...

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that in 1895, Culp had a post office and no railroad service.

These communities are listed based on their distance from Culp, with the one closest to Culp listed first.

  • Arch Spring
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Arch Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Arch Spring
    • Arch Spring is located in Blair County
  • Tipton
    (4 miles [6.4 km] to the northwest)
  • Fostoria
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Fostoria have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fostoria
    • Fostoria is located in Blair County
  • Bellwood
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Bellwood have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bellwood
    • Bellwood is located in Blair County
    • Population from the 2020 Census: 1,751 people
    • Jump to TripAdvisor's Tourism page for Bellwood <1>
  • Yellow Spring
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Yellow Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Yellow Spring
    • Yellow Spring is located in Blair County
  • Union Furnace
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Union Furnace have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Union Furnace
    • Union Furnace is located in Huntingdon County
  • Birmingham
    (5 miles [8 km] to the northeast)
  • Tyrone Forge
    (5 miles [8 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Tyrone Forge. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Tyrone Forge
    • Tyrone Forge is located in Blair County
    • Google driving directions:
    • From your current location to Tyrone Forge
    • From Culp to Tyrone Forge
  • Grazierville
    (5 miles [8 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Grazierville. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Grazierville
    • Grazierville is located in Blair County
    • Google driving directions:
    • From your current location to Grazierville
    • From Culp to Grazierville
  • Roots
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Roots have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Roots
    • Roots is located in Blair County
  • Point View
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Point View have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Point View
    • Point View is located in Blair County
  • Water Street
    (6 miles [9.7 km] to the east)
  • Continue List   (17 more) ...
    • Spruce Creek
      (6 miles [9.7 km] to the east)
      • Note: The GPS coordinates that we are using for Spruce Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spruce Creek
      • Spruce Creek is located in Huntingdon County
      • Jump to TripAdvisor's Tourism page for Spruce Creek <1>
    • Tyrone
      (6 miles [9.7 km] to the north)
      • Note: The GPS coordinates that we are using for Tyrone have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tyrone
      • Tyrone is located in Blair County
      • Population from the 2020 Census: 5,095 people
      • Jump to TripAdvisor's Tourism page for Tyrone <1>
    • Juniata
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Juniata have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Juniata
      • Juniata is located in Blair County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Culp. See our List of 1890's Communities around Culp.

Newspapers Published in Culp ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 68 newspapers that have been published in the area around Culp.

Although we're unaware of any newspapers that were published in the immediate area of Culp, there are papers which were published within 15 miles [24.1 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Culp.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Culp:

Unfortunately, we don't know of a website for Culp. If you can help, please contact us through our Feedback Page.

The official website for Commonwealth of Pennsylvania: https://www.pa.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Culp, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Culp) to Point B.Our distance measurements begin at a specific point in Culp. The point we use is located at these GPS coordinates - Latitude: 40.5808, Longitude: -78.2596       In this case, the coordinates for Culp have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025