|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Wilcox Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Wilcox Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Wilcox Cemetery (FG ID #39559). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Wilcox Cemetery. We've listed the following communities based on their distance, with the closest first.
- Kent
(2 miles [3.2 km] to the north)
- Shaniko
(10 miles [16.1 km] to the south)
- Rosebush ‑ Historic
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Rosebush. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rosebush
- Rosebush is located in Sherman County
- Google driving directions:
- From your current location to Rosebush
- From the Wilcox Cemetery to Rosebush
- Grass Valley
(14 miles [22.5 km] to the north)
- Antelope
(16 miles [25.7 km] to the south)
- Clarno
(19 miles [30.6 km] to the southeast)
- Maupin
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Maupin have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maupin
- Maupin is located in Wasco County
- Population from the 2020 Census: 429 people
- Jump to TripAdvisor's Tourism page for Maupin <3>
- Monkland
(22 miles [35.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Monkland. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Monkland
- Monkland is located in Sherman County
- Google driving directions:
- From your current location to Monkland
- From the Wilcox Cemetery to Monkland
- Moro
(22 miles [35.4 km] to the north)
- Gordon ‑ Historic
(23 miles [37 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Gordon. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Gordon
- Gordon is located in Sherman County
- Google driving directions:
- From your current location to Gordon
- From the Wilcox Cemetery to Gordon
- Mayville
(24 miles [38.6 km] to the east)
- De Moss Springs
(24 miles [38.6 km] to the north)
- Nansene
(24 miles [38.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Nansene. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Nansene
- Nansene is located in Wasco County
- Google driving directions:
- From your current location to Nansene
- From the Wilcox Cemetery to Nansene
- Tygh Valley
(24 miles [38.6 km] to the west)
- Fossil
(25 miles [40.2 km] to the southeast)
- Condon
(25 miles [40.2 km] to the east)
- Donnybrook ‑ Historic
(27 miles [43.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Donnybrook. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Donnybrook
- Donnybrook is located in Jefferson County
- Former names for Donnybrook:
- Axehandle
- Kilts
- Google driving directions:
- From your current location to Donnybrook
- From the Wilcox Cemetery to Donnybrook
- Wapinitia
(27 miles [43.5 km] to the west)
- Kingsley ‑ Historic
(28 miles [45.1 km] to the northwest)
- Wamic
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Wamic have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wamic
- Wamic is located in Wasco County
- Jump to TripAdvisor's Tourism page for Wamic <3>
- Ashwood
(29 miles [46.7 km] to the south)
- Clem
(29 miles [46.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Clem. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Clem
- Clem is located in Gilliam County
- Google driving directions:
- From your current location to Clem
- From the Wilcox Cemetery to Clem
- Klondike
(29 miles [46.7 km] to the north)
- Rice ‑ Historic
(29 miles [46.7 km] to the northwest)
- Dufur
(29 miles [46.7 km] to the northwest)
Off-the-Road Links ...
The official website for Sherman County: www.sherman-county.com/ The official website for State of Oregon: https://www.oregon.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Wilcox Cemetery. The point we use is located at these GPS coordinates - Latitude: 45.1560, Longitude: -120.6864 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|