RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Noble County >> Vorhies >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Ohio

The Commemorative Quarter for Ohio





TripAdvisor Links

Introduction ...

When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

While we are unaware of a TripAdvisor Tourism page that is specific to Vorhies, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Vorhies - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 41 communities listed:

  • Adamsville
    (28 miles [45.1 km] to the northwest)
  • Barnesville
    (20 miles [32.2 km] to the northeast)
  • Belle Valley
    (4 miles [6.4 km] to the west)
  • Belmont
    (27 miles [43.5 km] to the northeast)
  • Bethesda
    (25 miles [40.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bethesda have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bethesda
    • Bethesda is located in Belmont County
    • Population from the 2020 Census: 1,198 people
    • Jump to TripAdvisor's Tourism page for Bethesda <2>
  • Beverly
    (19 miles [30.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Beverly have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Beverly
    • Beverly is located in Washington County
    • Population from the 2020 Census: 1,336 people
    • Jump to TripAdvisor's Tourism page for Beverly <2>
  • Blue Rock
    (22 miles [35.4 km] to the west)
  • Buffalo
    (8 miles [12.9 km] to the north)
  • Byesville
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for Byesville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Byesville
    • Byesville is located in Guernsey County
    • Population from the 2020 Census: 2,345 people
    • Jump to TripAdvisor's Tourism page for Byesville <2>
  • Caldwell
    (4 miles [6.4 km] to the southwest)
  • Cambridge
    (17 miles [27.4 km] to the northwest)
  • Chandlersville
    (20 miles [32.2 km] to the west)
    • Note: The GPS coordinates that we are using for Chandlersville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chandlersville
    • Chandlersville is located in Muskingum County
    • Jump to TripAdvisor's Tourism page for Chandlersville <2>
  • Chesterhill
    (29 miles [46.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Chesterhill have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chesterhill
    • Chesterhill is located in Morgan County
    • Population from the 2020 Census: 271 people
    • Jump to TripAdvisor's Tourism page for Chesterhill <2>
  • Cumberland
    (10 miles [16.1 km] to the west)
  • Duncan Falls
    (24 miles [38.6 km] to the west)
    • Note: The GPS coordinates that we are using for Duncan Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Duncan Falls
    • Duncan Falls is located in Muskingum County
    • Jump to TripAdvisor's Tourism page for Duncan Falls <2>
  • Fairview
    (21 miles [33.8 km] to the northeast)
    • Jump to our Gazetteer entry for Fairview
    • Fairview is located in Guernsey County
    • Population from the 2020 Census: 81 people
    • Fairview has also been known as:
    • Fairview village
    • Jump to TripAdvisor's Tourism page for Fairview <2>
  • Freeport
    (30 miles [48.3 km] to the north)
  • Kimbolton
    (25 miles [40.2 km] to the north)
    • Note: The GPS coordinates that we are using for Kimbolton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kimbolton
    • Kimbolton is located in Guernsey County
    • Jump to TripAdvisor's Tourism page for Kimbolton <2>
  • Lore City
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for Lore City have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lore City
    • Lore City is located in Guernsey County
    • Population from the 2020 Census: 309 people
    • Jump to TripAdvisor's Tourism page for Lore City <2>
  • Lowell
    (18 miles [29 km] to the south)
    • Note: The GPS coordinates that we are using for Lowell have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lowell
    • Lowell is located in Washington County
    • Population from the 2020 Census: 529 people
    • Jump to TripAdvisor's Tourism page for Lowell <2>
  • Macksburg
    (11 miles [17.7 km] to the south)
  • Malta
    (23 miles [37 km] to the southwest)
    • Note: The GPS coordinates that we are using for Malta have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Malta
    • Malta is located in Morgan County
    • Population from the 2020 Census: 631 people
    • Jump to TripAdvisor's Tourism page for Malta <2>
  • Marietta
    (26 miles [41.8 km] to the south)
  • McConnelsville
    (22 miles [35.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for McConnelsville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McConnelsville
    • McConnelsville is located in Morgan County
    • Population from the 2020 Census: 1,720 people
    • Jump to TripAdvisor's Tourism page for McConnelsville <2>
  • New Concord
    (19 miles [30.6 km] to the northwest)
    • Note: The GPS coordinates that we are using for New Concord have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Concord
    • New Concord is located in Muskingum County
    • Population from the 2020 Census: 2,165 people
    • Jump to TripAdvisor's Tourism page for New Concord <2>
  • New Matamoras
    (28 miles [45.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for New Matamoras have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Matamoras
    • New Matamoras is located in Washington County
    • Jump to TripAdvisor's Tourism page for New Matamoras <2>
  • Norwich
    (21 miles [33.8 km] to the northwest)
  • Old Washington
    (16 miles [25.7 km] to the north)
    • Note: The GPS coordinates that we are using for Old Washington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Old Washington
    • Old Washington is located in Guernsey County
    • Population from the 2020 Census: 267 people
    • Jump to TripAdvisor's Tourism page for Old Washington <2>
  • Philo
    (23 miles [37 km] to the west)
    • Note: The GPS coordinates that we are using for Philo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Philo
    • Philo is located in Muskingum County
    • Population from the 2020 Census: 728 people
    • Jump to TripAdvisor's Tourism page for Philo <2>
  • Piedmont
    (30 miles [48.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Piedmont have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Piedmont
    • Piedmont is located in Harrison County
    • Jump to TripAdvisor's Tourism page for Piedmont <2>
  • Pleasant City
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Pleasant City have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pleasant City
    • Pleasant City is located in Guernsey County
    • Population from the 2020 Census: 422 people
    • Jump to TripAdvisor's Tourism page for Pleasant City <2>
  • Quaker City
    (14 miles [22.5 km] to the northeast)
  • Reno
    (29 miles [46.7 km] to the south)
    • Note: The GPS coordinates that we are using for Reno have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Reno
    • Reno is located in Washington County
    • Former name for Reno:
    • Jericho
    • Jump to TripAdvisor's Tourism page for Reno <2>
  • Salesville
    (14 miles [22.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Salesville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Salesville
    • Salesville is located in Guernsey County
    • Estimated population in 2016: 126 people
    • Jump to TripAdvisor's Tourism page for Salesville <2>
  • Senecaville
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Senecaville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Senecaville
    • Senecaville is located in Guernsey County
    • Population from the 2020 Census: 447 people
    • Jump to TripAdvisor's Tourism page for Senecaville <2>
  • Sistersville
    (29 miles [46.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Sistersville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sistersville
    • Sistersville is located in Tyler County (WV)
    • Population from the 2020 Census: 1,267 people
    • Jump to TripAdvisor's Tourism page for Sistersville <2>
  • Stockport
    (24 miles [38.6 km] to the southwest)
  • Waterford
    (19 miles [30.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Waterford have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Waterford
    • Waterford is located in Washington County
    • Jump to TripAdvisor's Tourism page for Waterford <2>
  • Williamstown
    (27 miles [43.5 km] to the south)
  • Woodsfield
    (18 miles [29 km] to the east)
  • Zanesville
    (30 miles [48.3 km] to the west)

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Vorhies) to Point B.Our distance measurements begin at a specific point in Vorhies. The point we use is located at these GPS coordinates - Latitude: 39.7959, Longitude: -81.4660       In this case, the coordinates for Vorhies have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024