Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Gath (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Gath. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Gath is located in Highland County.
To see how the shape of Ohio's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Highland County: Adams, Brown, Clinton, Fayette, Pike & Ross.
Below are the counties that are near Gath. For each of these counties, we show a sample of those communities that are closest to Gath:
- Highland County (The home county of Gath)
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Buford
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for Buford
- Buford is located in Highland County
- Hollowtown
(3 miles [4.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hollowtown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hollowtown
- Hollowtown is located in Highland County
- Mowrystown
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Mowrystown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mowrystown
- Mowrystown is located in Highland County
- Population from the 2020 Census: 353 people
- Sicily ‑ Historic
(3 miles [4.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Sicily. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sicily
- Sicily is located in Highland County
- Needfull
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Needfull. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Needfull
- Needfull is located in Highland County
- Harwood
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for Harwood
- Harwood is located in Highland County
- Sugar Tree Ridge
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Sugar Tree Ridge. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sugar Tree Ridge
- Sugar Tree Ridge is located in Highland County
- Shackleton
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Shackleton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Shackleton
- Shackleton is located in Highland County
- Folsom
(11 miles [17.7 km] to the east)
- Jump to our Gazetteer entry for Folsom
- Folsom is located in Highland County
- Hoagland
(11 miles [17.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Hoagland. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hoagland
- Hoagland is located in Highland County
- Lynchburg
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Lynchburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynchburg
- Lynchburg is located in Highland County
- Population from the 2020 Census: 1,493 people
- Jump to TripAdvisor's Tourism page for Lynchburg <3>
- Berrysville
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Berrysville
- Berrysville is located in Highland County
- Adams County
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Emerald
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Emerald
- Emerald is located in Adams County
- Winchester
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Winchester have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winchester
- Winchester is located in Adams County
- Population from the 2020 Census: 1,002 people
- Jump to TripAdvisor's Tourism page for Winchester <3>
- Buck Run ‑ Historic
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Buck Run have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buck Run
- Buck Run is located in Adams County
- Cherry Fork
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Cherry Fork have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cherry Fork
- Cherry Fork is located in Adams County
- Estimated population in 2016: 155 people
- Seaman
(15 miles [24.1 km] to the southeast)
- Youngsville
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Youngsville
- Youngsville is located in Adams County
- May Hill
(16 miles [25.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for May Hill. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for May Hill
- May Hill is located in Adams County
- Tranquility
(16 miles [25.7 km] to the southeast)
- Jump to our Gazetteer entry for Tranquility
- Tranquility is located in Adams County
- Harshasville
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for Harshasville
- Harshasville is located in Adams County
- Louden
(19 miles [30.6 km] to the east)
- Jump to our Gazetteer entry for Louden
- Louden is located in Adams County
- Unity
(19 miles [30.6 km] to the southeast)
- Jump to our Gazetteer entry for Unity
- Unity is located in Adams County
- Wheat Ridge
(20 miles [32.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Wheat Ridge. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Wheat Ridge
- Wheat Ridge is located in Adams County
- Brown County
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Sardinia
(3 miles [4.8 km] to the south)
- Fincastle
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for Fincastle
- Fincastle is located in Brown County
- Bardwell
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for Bardwell
- Bardwell is located in Brown County
- Mount Orab
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Mount Orab have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Orab
- Mount Orab is located in Brown County
- Population from the 2020 Census: 3,422 people
- Jump to TripAdvisor's Tourism page for Mount Orab <3>
- Macon
(7 miles [11.3 km] to the southeast)
- Jump to our Gazetteer entry for Macon
- Macon is located in Brown County
- Fivemile
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for Fivemile
- Fivemile is located in Brown County
- New Hope
(8 miles [12.9 km] to the southwest)
- Jump to our Gazetteer entry for New Hope
- New Hope is located in Brown County
- Arnheim
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Arnheim
- Arnheim is located in Brown County
- Fayetteville
(10 miles [16.1 km] to the northwest)
- Saint Martin
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Saint Martin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Martin
- Saint Martin is located in Brown County
- Estimated population in 2011: 128 people
- Ash Ridge
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Ash Ridge
- Ash Ridge is located in Brown County
- Locust Ridge
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Locust Ridge
- Locust Ridge is located in Brown County
- Clermont County
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Marathon
(12 miles [19.3 km] to the northwest)
- Jump to our Gazetteer entry for Marathon
- Marathon is located in Clermont County
- Williamsburg
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Williamsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamsburg
- Williamsburg is located in Clermont County
- Population from the 2020 Census: 2,574 people
- Jump to TripAdvisor's Tourism page for Williamsburg <3>
- Moores Fork
(14 miles [22.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Moores Fork. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Moores Fork
- Moores Fork is located in Clermont County
- Afton
(15 miles [24.1 km] to the west)
- Jump to our Gazetteer entry for Afton
- Afton is located in Clermont County
- Bethel
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Bethel have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethel
- Bethel is located in Clermont County
- Population from the 2020 Census: 2,825 people
- Jump to TripAdvisor's Tourism page for Bethel <3>
- Newtonsville
(17 miles [27.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Newtonsville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Newtonsville
- Newtonsville is located in Clermont County
- Population from the 2020 Census: 378 people
- Bantam
(18 miles [29 km] to the west)
- Jump to our Gazetteer entry for Bantam
- Bantam is located in Clermont County
- Elk Lick ‑ Historic
(18 miles [29 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Elk Lick. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Elk Lick
- Elk Lick is located in Clermont County
- Owensville
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Owensville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Owensville
- Owensville is located in Clermont County
- Population from the 2020 Census: 832 people
- Jump to TripAdvisor's Tourism page for Owensville <3>
- Hulington
(19 miles [30.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hulington. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hulington
- Hulington is located in Clermont County
- Ashdale
(20 miles [32.2 km] to the west)
- Jump to our Gazetteer entry for Ashdale
- Ashdale is located in Clermont County
- Batavia
(20 miles [32.2 km] to the west)
- Clinton County
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Westboro
(16 miles [25.7 km] to the north)
- Jump to our Gazetteer entry for Westboro
- Westboro is located in Clinton County
- Martinsville
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Martinsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Martinsville
- Martinsville is located in Clinton County
- Population from the 2020 Census: 439 people
- Midland
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midland
- Midland is located in Clinton County
- Population from the 2020 Census: 317 people
- New Vienna
(18 miles [29 km] to the north)
- Blanchester
(18 miles [29 km] to the northwest)
- Morrisville
(20 miles [32.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Morrisville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Morrisville
- Morrisville is located in Clinton County
- Lees Creek
(25 miles [40.2 km] to the north)
- Jump to our Gazetteer entry for Lees Creek
- Lees Creek is located in Clinton County
- Clarksville
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Clarksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarksville
- Clarksville is located in Clinton County
- Population from the 2020 Census: 552 people
- Jump to TripAdvisor's Tourism page for Clarksville <3>
- Wilmington
(26 miles [41.8 km] to the north)
- Memphis
(26 miles [41.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Memphis. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Memphis
- Memphis is located in Clinton County
- Sabina
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Sabina have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sabina
- Sabina is located in Clinton County
- Population from the 2020 Census: 2,562 people
- Jump to TripAdvisor's Tourism page for Sabina <3>
- Hamilton County
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Milford
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Milford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milford
- Milford is located in Hamilton County
- Population from the 2020 Census: 6,801 people
- Jump to TripAdvisor's Tourism page for Milford <3>
- Terrace Park
(27 miles [43.5 km] to the west)
- Jump to our Gazetteer entry for Terrace Park
- Terrace Park is located in Hamilton County
- Population from the 2020 Census: 2,292 people
- Dry Run
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Dry Run have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dry Run
- Dry Run is located in Hamilton County
- Mount Summit
(28 miles [45.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Mount Summit. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Mount Summit
- Mount Summit is located in Hamilton County
- Loveland Park
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Loveland Park have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loveland Park
- Loveland Park is located in Hamilton County
- Forestville
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Forestville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forestville
- Forestville is located in Hamilton County
- Newtown
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Newtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newtown
- Newtown is located in Hamilton County
- Population from the 2020 Census: 2,665 people
- Jump to TripAdvisor's Tourism page for Newtown <3>
- Sherwood
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Sherwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sherwood
- Sherwood is located in Hamilton County
- The Village of Indian Hill
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for The Village of Indian Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for The Village of Indian Hill
- The Village of Indian Hill is located in Hamilton County
- Population from the 2020 Census: 5,769 people
- Fruit Hill
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Fruit Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fruit Hill
- Fruit Hill is located in Hamilton County
- Sherwood Village
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Sherwood Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sherwood Village
- Sherwood Village is located in Hamilton County
- Pike County
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Cynthiana
(25 miles [40.2 km] to the east)
- Jump to our Gazetteer entry for Cynthiana
- Cynthiana is located in Pike County
- Newfain
(26 miles [41.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Newfain. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Newfain
- Newfain is located in Pike County
- Poplar Grove
(26 miles [41.8 km] to the east)
- Jump to our Gazetteer entry for Poplar Grove
- Poplar Grove is located in Pike County
- Latham
(29 miles [46.7 km] to the east)
- Spellman Crossing
(29 miles [46.7 km] to the east)
- Jump to our Gazetteer entry for Spellman Crossing
- Spellman Crossing is located in Pike County
- Ross County
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Fruitdale
(29 miles [46.7 km] to the northeast)
- Jump to our Gazetteer entry for Fruitdale
- Fruitdale is located in Ross County
- Bainbridge
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Bainbridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bainbridge
- Bainbridge is located in Ross County
- Population from the 2020 Census: 846 people
- Jump to TripAdvisor's Tourism page for Bainbridge <3>
- Humboldt
(30 miles [48.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Humboldt. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Humboldt
- Humboldt is located in Ross County
- Summit County
- Manchester
(27 miles [43.5 km] to the southeast)
- Jump to our Gazetteer entry for Manchester
- Manchester is located in Summit County
- Warren County
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Butlerville
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Butlerville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Butlerville
- Butlerville is located in Warren County
- Population from the 2020 Census: 162 people
- Pleasant Plain
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Pleasant Plain have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Plain
- Pleasant Plain is located in Warren County
- Population from the 2020 Census: 171 people
- Jump to TripAdvisor's Tourism page for Pleasant Plain <3>
- Osceola
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Osceola have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Osceola
- Osceola is located in Warren County
- Comargo
(24 miles [38.6 km] to the northwest)
- Jump to our Gazetteer entry for Comargo
- Comargo is located in Warren County
- San Je Village
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for San Je Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for San Je Village
- San Je Village is located in Warren County
- Morrow
(26 miles [41.8 km] to the northwest)
- Maineville
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Maineville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maineville
- Maineville is located in Warren County
- Population from the 2020 Census: 1,132 people
- Jump to TripAdvisor's Tourism page for Maineville <3>
- Landen
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Landen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Landen
- Landen is located in Warren County
- Jump to TripAdvisor's Tourism page for Landen <3>
- South Lebanon
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for South Lebanon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Lebanon
- South Lebanon is located in Warren County
- Population from the 2020 Census: 4,799 people
- Jump to TripAdvisor's Tourism page for South Lebanon <3>
- Bracken County (KY)
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Augusta
(22 miles [35.4 km] to the southwest)
- Rock Springs
(25 miles [40.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Rock Springs. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Rock Springs
- Rock Springs is located in Bracken County (KY)
- Bradford
(26 miles [41.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Bradford. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Bradford
- Bradford is located in Bracken County (KY)
- Chatham
(26 miles [41.8 km] to the southwest)
- Jump to our Gazetteer entry for Chatham
- Chatham is located in Bracken County (KY)
- Foster
(28 miles [45.1 km] to the southwest)
- Germantown
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Germantown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Germantown
- Germantown is located in Bracken County (KY)
- Population from the 2020 Census: 149 people
- Brooksville
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Brooksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brooksville
- Brooksville is located in Bracken County (KY)
- Population from the 2020 Census: 650 people
- Jump to TripAdvisor's Tourism page for Brooksville <3>
- Campbell County (KY)
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Mentor
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Mentor have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mentor
- Mentor is located in Campbell County (KY)
- Population from the 2020 Census: 226 people
- California
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for California have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for California
- California is located in Campbell County (KY)
- Population from the 2020 Census: 98 people
- Jump to TripAdvisor's Tourism page for California <3>
- Flagg Spring
(27 miles [43.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Flagg Spring. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Flagg Spring
- Flagg Spring is located in Campbell County (KY)
- Ross
(28 miles [45.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Ross. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ross
- Ross is located in Campbell County (KY)
- Gubser Mill
(29 miles [46.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Gubser Mill. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Gubser Mill
- Gubser Mill is located in Campbell County (KY)
- Camp Springs
(30 miles [48.3 km] to the west)
- Jump to our Gazetteer entry for Camp Springs
- Camp Springs is located in Campbell County (KY)
- Melbourne
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Melbourne have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Melbourne
- Melbourne is located in Campbell County (KY)
- Population from the 2020 Census: 487 people
- Jump to TripAdvisor's Tourism page for Melbourne <3>
- Lewis County (KY)
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Pence
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Pence have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pence
- Pence is located in Lewis County (KY)
- Concord
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Concord
- Concord is located in Lewis County (KY)
- Population from the 2020 Census: 31 people
- Mason County (KY)
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Dover
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Dover have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dover
- Dover is located in Mason County (KY)
- Population from the 2020 Census: 252 people
- South Ripley
(22 miles [35.4 km] to the south)
- Jump to our Gazetteer entry for South Ripley
- South Ripley is located in Mason County (KY)
- Minerva
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Minerva have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Minerva
- Minerva is located in Mason County (KY)
- Maysville
(29 miles [46.7 km] to the south)
- Washington
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Washington came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Washington
- Washington is located in Mason County (KY)
- Pendleton County (KY)
- The following are listed by their distance from Gath, with the one closest to Gath listed first.
- Ivor
(27 miles [43.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Ivor. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ivor
- Ivor is located in Pendleton County (KY)
- Carntown
(28 miles [45.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Carntown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Carntown
- Carntown is located in Pendleton County (KY)
- Peach Grove
(30 miles [48.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Peach Grove. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Peach Grove
- Peach Grove is located in Pendleton County (KY)
For an expanded list of the communities that are closest to Gath, see our County-by-County Page for Gath.
Cemeteries Near Gath ...
Below are cemeteries that are in the vicinity of Gath.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Gath covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Gath, with the one closest to Gath listed first.
- Bells Run Cemetery
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for the Bells Run Cemetery
- Note: The GPS coordinates that we are using for the Bells Run Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Buford Cemetery
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for the Buford Cemetery
- Note: The GPS coordinates that we are using for the Buford Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Higgins Cemetery
(3 miles [4.8 km] to the southwest)
- Jump to our Gazetteer entry for the Higgins Cemetery
- Note: The GPS coordinates that we are using for the Higgins Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Sardinia Cemetery
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for the Sardinia Cemetery
- Note: The GPS coordinates that we are using for the Sardinia Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Ebenezer Cemetery
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for the Ebenezer Cemetery
- Note: The GPS coordinates that we are using for the Ebenezer Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- McNeely Cemetery
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for the McNeely Cemetery
- Note: The GPS coordinates that we are using for the McNeely Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Petithory Cemetery
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for the Petithory Cemetery
- Note: The GPS coordinates that we are using for the Petithory Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Roberts Cemetery #1
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for the Roberts Cemetery #1
- Note: The GPS coordinates that we are using for the Roberts Cemetery #1 have been provided by the GNIS.<2> The coordinates still need to be verified.
- Hollowtown Cemetery
(3 miles [4.8 km] to the north)
- Jump to our Gazetteer entry for the Hollowtown Cemetery
- Note: The GPS coordinates that we are using for the Hollowtown Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Bingamon Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Bingamon Cemetery
- Note: The GPS coordinates that we are using for the Bingamon Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Bratton Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Bratton Cemetery
- Note: The GPS coordinates that we are using for the Bratton Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Vance Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Vance Cemetery
- Note: The GPS coordinates that we are using for the Vance Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Continue List (540 more) ...
- Wright Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Wright Cemetery
- Note: The GPS coordinates that we are using for the Wright Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Mt. Carmel Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Mt. Carmel Cemetery
- Note: The GPS coordinates that we are using for the Mt. Carmel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Mowrystown Cemetery
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for the Mowrystown Cemetery
- Note: The GPS coordinates that we are using for the Mowrystown Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
The Rand McNally Atlas shows that in 1895, Gath had a post office and no railroad service.
These communities are listed based on their distance from Gath, with the one closest to Gath listed first.
- Buford
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for Buford
- Buford is located in Highland County
- Sicily ‑ Historic
(3 miles [4.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Sicily. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sicily
- Sicily is located in Highland County
- Sardinia
(3 miles [4.8 km] to the south)
- Mowrystown
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Mowrystown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mowrystown
- Mowrystown is located in Highland County
- Population from the 2020 Census: 353 people
- Taylorsville
(3 miles [4.8 km] to the east)
- Note: The GPS coordinates that we are using for Taylorsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylorsville
- Taylorsville is located in Highland County
- Hollowtown
(3 miles [4.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hollowtown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hollowtown
- Hollowtown is located in Highland County
- Needfull
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Needfull. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Needfull
- Needfull is located in Highland County
- White Oak
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for White Oak have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Oak
- White Oak is located in Brown County
- East Danville
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for East Danville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Danville
- East Danville is located in Highland County
- Winkle
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Winkle have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winkle
- Winkle is located in Highland County
- Pricetown
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Pricetown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pricetown
- Pricetown is located in Highland County
- Mount Orab
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Mount Orab have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Orab
- Mount Orab is located in Brown County
- Population from the 2020 Census: 3,422 people
- Jump to TripAdvisor's Tourism page for Mount Orab <3>
- Continue List (24 more) ...
- Fincastle
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for Fincastle
- Fincastle is located in Brown County
- Sugar Tree Ridge
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Sugar Tree Ridge. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sugar Tree Ridge
- Sugar Tree Ridge is located in Highland County
- Fivemile
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for Fivemile
- Fivemile is located in Brown County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Gath. See our List of 1890's Communities around Gath.
Newspapers Published in Gath ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 56 newspapers that have been published in the area around Gath.
Although we're unaware of any newspapers that were published in the immediate area of Gath, there are papers which were published within 20 miles [32.2 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Gath.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Gath:
- Websites specific to Ohio
- Pages specific to Highland County
- Genealogy information for nearby counties
- Adams County
- Brown County
- Clermont County
- Clinton County
- Hamilton County
- Pike County
- Ross County
- Summit County
- Warren County
- Bracken County
- Campbell County
- Lewis County
- Mason County
- Pendleton County
- Cemetery Information and Directories for Ohio
Off-the-Road Links ...
Unfortunately, we don't know of a website for Gath. If you can help, please contact us through our Feedback Page.
The official website for Highland County: www.highland-co.com/
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Gath, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Gath) to Point B.Our distance measurements begin at a specific point in Gath. The point we use is located at these GPS coordinates - Latitude: 39.0634, Longitude: -83.8041 In this case, the coordinates for Gath have been provided by the Geographic Names Information System (GNIS). |