Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Gambier (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Gambier. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Gambier is located in Knox County.
To see how the shape of Ohio's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Knox County: Coshocton, Delaware, Holmes, Licking, Morrow & Richland.
Below are the counties that are near Gambier. For each of these counties, we show a sample of those communities that are closest to Gambier:
- Knox County (The home county of Gambier)
- The following are listed by their distance from Gambier, with the one closest to Gambier listed first.
- Fleaville ‑ Historic
(3 miles [4.8 km] to the west)
- Note: The GPS coordinates that we are using for Fleaville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fleaville
- Fleaville is located in Knox County
- Fleaville has also been known as:
- Fleaville City
- Pipesville
(4 miles [6.4 km] to the east)
- Mount Vernon
(4 miles [6.4 km] to the west)
- Hunt
(5 miles [8 km] to the southwest)
- Millwood
(6 miles [9.7 km] to the east)
- Amity
(6 miles [9.7 km] to the north)
- Hollisters ‑ Historic
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Hollisters. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hollisters
- Hollisters is located in Knox County
- Google driving directions:
- From your current location to Hollisters
- From Gambier to Hollisters
- Martinsburg
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Martinsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Martinsburg
- Martinsburg is located in Knox County
- Population from the 2020 Census: 232 people
- Jump to TripAdvisor's Tourism page for Martinsburg <2>
- Zuck ‑ Historic
(8 miles [12.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Zuck. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Zuck
- Zuck is located in Knox County
- Google driving directions:
- From your current location to Zuck
- From Gambier to Zuck
- Buckeye City
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Buckeye City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckeye City
- Buckeye City is located in Knox County
- Danville
(8 miles [12.9 km] to the northeast)
- Bladensburg
(8 miles [12.9 km] to the southeast)
- Bangs
(8 miles [12.9 km] to the west)
- Ashland County
- The following are listed by their distance from Gambier, with the one closest to Gambier listed first.
- Perrysville
(19 miles [30.6 km] to the north)
- Loudonville
(19 miles [30.6 km] to the northeast)
- McKay
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for McKay. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for McKay
- McKay is located in Ashland County
- Google driving directions:
- From your current location to McKay
- From Gambier to McKay
- Mifflin
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Mifflin have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mifflin
- Mifflin is located in Ashland County
- Population from the 2020 Census: 135 people
- Hayesville
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Hayesville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hayesville
- Hayesville is located in Ashland County
- Population from the 2020 Census: 459 people
- Coshocton County
- The following are listed by their distance from Gambier, with the one closest to Gambier listed first.
- Owls Town ‑ Historic
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Owls Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Owls Town
- Owls Town is located in Coshocton County
- Walhonding
(13 miles [20.9 km] to the east)
- New Guilford
(13 miles [20.9 km] to the southeast)
- Mohawk Village
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Mohawk Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mohawk Village
- Mohawk Village is located in Coshocton County
- Nellie
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Nellie have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nellie
- Nellie is located in Coshocton County
- Population from the 2020 Census: 131 people
- West Bedford
(18 miles [29 km] to the southeast)
- Warsaw
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Warsaw have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warsaw
- Warsaw is located in Coshocton County
- Population from the 2020 Census: 690 people
- Jump to TripAdvisor's Tourism page for Warsaw <2>
- Cooperdale
(20 miles [32.2 km] to the southeast)
- Metham
(21 miles [33.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Metham. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Metham
- Metham is located in Coshocton County
- Google driving directions:
- From your current location to Metham
- From Gambier to Metham
- Layland
(22 miles [35.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Layland. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Layland
- Layland is located in Coshocton County
- Google driving directions:
- From your current location to Layland
- From Gambier to Layland
- White Womans Town ‑ Historic
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for White Womans Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Womans Town
- White Womans Town is located in Coshocton County
- Canal Lewisville
(29 miles [46.7 km] to the east)
- Conesville
(29 miles [46.7 km] to the southeast)
- Delaware County
- The following are listed by their distance from Gambier, with the one closest to Gambier listed first.
- Peerless ‑ Historic
(19 miles [30.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Peerless. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Peerless
- Peerless is located in Delaware County
- Peerless has also been known as:
- Peerless Station
- Google driving directions:
- From your current location to Peerless
- From Gambier to Peerless
- North Condit
(21 miles [33.8 km] to the west)
- Green ‑ Historic
(22 miles [35.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Green. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Green
- Green is located in Delaware County
- Google driving directions:
- From your current location to Green
- From Gambier to Green
- South Condit
(22 miles [35.4 km] to the southwest)
- Condit
(22 miles [35.4 km] to the west)
- Culver Creek ‑ Historic
(22 miles [35.4 km] to the west)
- East Liberty
(22 miles [35.4 km] to the west)
- Vans Valley
(23 miles [37 km] to the southwest)
- Olive Green
(23 miles [37 km] to the west)
- Stark's Corners ‑ Historic
(24 miles [38.6 km] to the west)
- Big Walnut ‑ Historic
(25 miles [40.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Big Walnut. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Big Walnut
- Big Walnut is located in Delaware County
- Google driving directions:
- From your current location to Big Walnut
- From Gambier to Big Walnut
- Kingston Center ‑ Historic
(25 miles [40.2 km] to the west)
- Sunbury
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Sunbury have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunbury
- Sunbury is located in Delaware County
- Population from the 2020 Census: 6,881 people
- Jump to TripAdvisor's Tourism page for Sunbury <2>
- Franklin County
- The following are listed by their distance from Gambier, with the one closest to Gambier listed first.
- New Albany
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for New Albany have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Albany
- New Albany is located in Franklin County
- Population from the 2020 Census: 11,072 people
- Oakland
(30 miles [48.3 km] to the southwest)
- Holmes County
- The following are listed by their distance from Gambier, with the one closest to Gambier listed first.
- Stillwell
(16 miles [25.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Stillwell. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Stillwell
- Stillwell is located in Holmes County
- Google driving directions:
- From your current location to Stillwell
- From Gambier to Stillwell
- Glenmont
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Glenmont have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glenmont
- Glenmont is located in Holmes County
- Population from the 2020 Census: 298 people
- Jump to TripAdvisor's Tourism page for Glenmont <2>
- Nashville
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Nashville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nashville
- Nashville is located in Holmes County
- Population from the 2020 Census: 183 people
- Killbuck
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Killbuck have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Killbuck
- Killbuck is located in Holmes County
- Population from the 2020 Census: 921 people
- Jump to TripAdvisor's Tourism page for Killbuck <2>
- Miley Crossroads
(23 miles [37 km] to the northeast)
- Millersburg
(28 miles [45.1 km] to the northeast)
- Holmesville
(30 miles [48.3 km] to the northeast)
- Licking County
- The following are listed by their distance from Gambier, with the one closest to Gambier listed first.
- Utica
(9 miles [14.5 km] to the south)
- Henpeck ‑ Historic
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Henpeck. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Henpeck
- Henpeck is located in Licking County
- Google driving directions:
- From your current location to Henpeck
- From Gambier to Henpeck
- Long Run ‑ Historic
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Long Run. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Long Run
- Long Run is located in Licking County
- Former names for Long Run:
- Colville
- Oberlin
- Google driving directions:
- From your current location to Long Run
- From Gambier to Long Run
- Rain Rock ‑ Historic
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Rain Rock. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Rain Rock
- Rain Rock is located in Licking County
- Google driving directions:
- From your current location to Rain Rock
- From Gambier to Rain Rock
- Lock
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Lock. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lock
- Lock is located in Licking County
- Google driving directions:
- From your current location to Lock
- From Gambier to Lock
- Newton Mills ‑ Historic
(14 miles [22.5 km] to the south)
- Saint Louisville
(14 miles [22.5 km] to the south)
- Frampton ‑ Historic
(14 miles [22.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Frampton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Frampton
- Frampton is located in Licking County
- Google driving directions:
- From your current location to Frampton
- From Gambier to Frampton
- Chatham
(15 miles [24.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Chatham. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Chatham
- Chatham is located in Licking County
- Google driving directions:
- From your current location to Chatham
- From Gambier to Chatham
- Cokesbury Corners ‑ Historic
(15 miles [24.1 km] to the southwest)
- Highwater
(15 miles [24.1 km] to the southwest)
- Tilton Crossroads ‑ Historic
(16 miles [25.7 km] to the southeast)
- Cokesbury ‑ Historic
(16 miles [25.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Cokesbury. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cokesbury
- Cokesbury is located in Licking County
- Google driving directions:
- From your current location to Cokesbury
- From Gambier to Cokesbury
- Morrow County
- The following are listed by their distance from Gambier, with the one closest to Gambier listed first.
- Sparta
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Sparta have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sparta
- Sparta is located in Morrow County
- Population from the 2020 Census: 160 people
- Jump to TripAdvisor's Tourism page for Sparta <2>
- Chesterville
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Chesterville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chesterville
- Chesterville is located in Morrow County
- Population from the 2020 Census: 234 people
- Jump to TripAdvisor's Tourism page for Chesterville <2>
- Bloomfield
(17 miles [27.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Bloomfield. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bloomfield
- Bloomfield is located in Morrow County
- Google driving directions:
- From your current location to Bloomfield
- From Gambier to Bloomfield
- Vails Corners
(18 miles [29 km] to the west)
- Marengo
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Marengo have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marengo
- Marengo is located in Morrow County
- Population from the 2020 Census: 341 people
- Jump to TripAdvisor's Tourism page for Marengo <2>
- Fulton
(23 miles [37 km] to the west)
- Mount Gilead
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Mount Gilead have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Gilead
- Mount Gilead is located in Morrow County
- Population from the 2020 Census: 3,687 people
- Jump to TripAdvisor's Tourism page for Mount Gilead <2>
- West Liberty
(25 miles [40.2 km] to the west)
- Edison
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Edison have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edison
- Edison is located in Morrow County
- Population from the 2020 Census: 444 people
- Jump to TripAdvisor's Tourism page for Edison <2>
- West Point
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for West Point have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Point
- West Point is located in Morrow County
- Cardington
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Cardington have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cardington
- Cardington is located in Morrow County
- Population from the 2020 Census: 2,076 people
- Jump to TripAdvisor's Tourism page for Cardington <2>
- Blooming Grove
(28 miles [45.1 km] to the northwest)
- Shawtown
(30 miles [48.3 km] to the west)
- Muskingum County
- The following are listed by their distance from Gambier, with the one closest to Gambier listed first.
- Black Run
(22 miles [35.4 km] to the southeast)
- Frazeysburg
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Frazeysburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Frazeysburg
- Frazeysburg is located in Muskingum County
- Population from the 2020 Census: 1,315 people
- Jump to TripAdvisor's Tourism page for Frazeysburg <2>
- Nashport
(24 miles [38.6 km] to the southeast)
- Shannon
(25 miles [40.2 km] to the southeast)
- Dresden
(26 miles [41.8 km] to the southeast)
- Trinway
(26 miles [41.8 km] to the southeast)
- Wills Town ‑ Historic
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Wills Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wills Town
- Wills Town is located in Muskingum County
- Rock Cut
(30 miles [48.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Rock Cut. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Rock Cut
- Rock Cut is located in Muskingum County
- Google driving directions:
- From your current location to Rock Cut
- From Gambier to Rock Cut
- Richland County
- The following are listed by their distance from Gambier, with the one closest to Gambier listed first.
- Butler
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Butler have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Butler
- Butler is located in Richland County
- Population from the 2020 Census: 897 people
- Jump to TripAdvisor's Tourism page for Butler <2>
- Bellville
(17 miles [27.4 km] to the north)
- Newville
(17 miles [27.4 km] to the north)
- Lucas
(22 miles [35.4 km] to the north)
- Hanley Village
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Hanley Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hanley Village
- Hanley Village is located in Richland County
- Lexington
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Lexington have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lexington
- Lexington is located in Richland County
- Population from the 2020 Census: 4,695 people
- Jump to TripAdvisor's Tourism page for Lexington <2>
- Alta
(26 miles [41.8 km] to the north)
- Mansfield
(27 miles [43.5 km] to the north)
- Ontario
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Ontario have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ontario
- Ontario is located in Richland County
- Population from the 2020 Census: 6,102 people
- Jump to TripAdvisor's Tourism page for Ontario <2>
- Maybee
(30 miles [48.3 km] to the northwest)
- Wayne County
- The following are listed by their distance from Gambier, with the one closest to Gambier listed first.
- Shreve
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Shreve have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shreve
- Shreve is located in Wayne County
- Population from the 2020 Census: 1,526 people
- Jump to TripAdvisor's Tourism page for Shreve <2>
- Funk
(29 miles [46.7 km] to the northeast)
For an expanded list of the communities that are closest to Gambier, see our County-by-County Page for Gambier.
Cemeteries Near Gambier ...
Below are cemeteries that are in the vicinity of Gambier.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Gambier covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Gambier, with the one closest to Gambier listed first.
- Kenyon Cemetery
(Less than 2 miles to the southwest)
- Jump to our Gazetteer entry for the Kenyon Cemetery
- Note: The GPS coordinates that we are using for the Kenyon Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Oak Grove Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Oak Grove Cemetery
- Note: The GPS coordinates that we are using for the Oak Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Quarry Chapel Cemetery
(Less than 2 miles to the northeast)
- Hopewell Cemetery
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for the Hopewell Cemetery
- Note: The GPS coordinates that we are using for the Hopewell Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Mt. Zion Cemetery
(2 miles [3.2 km] to the east)
- Jump to our Gazetteer entry for the Mt. Zion Cemetery
- Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Memorial Gardens Cemetery
(2 miles [3.2 km] to the northwest)
- Jump to our Gazetteer entry for the Memorial Gardens Cemetery
- Note: The GPS coordinates that we are using for the Memorial Gardens Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Valley View Cemetery
(2 miles [3.2 km] to the northeast)
- Jump to our Gazetteer entry for the Valley View Cemetery
- Note: The GPS coordinates that we are using for the Valley View Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- St. Johns Cemetery
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for the St. Johns Cemetery
- Note: The GPS coordinates that we are using for the St. Johns Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Mt. Pleasant Cemetery
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for the Mt. Pleasant Cemetery
- Note: The GPS coordinates that we are using for the Mt. Pleasant Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Grove Cemetery
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for the Grove Cemetery
- Note: The GPS coordinates that we are using for the Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Branstool - Critchfield - Shrimplin Cemetery
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for the Branstool - Critchfield - Shrimplin Cemetery
- Note: The GPS coordinates that we are using for the Branstool - Critchfield - Shrimplin Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Patterson Cemetery
(3 miles [4.8 km] to the north)
- Continue List (486 more) ...
- N N A Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the N N A Cemetery
- Note: The GPS coordinates that we are using for the N N A Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Old Jelloway - Drake Cemetery
(4 miles [6.4 km] to the northeast)
- Skeen Cemetery
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for the Skeen Cemetery
- Note: The GPS coordinates that we are using for the Skeen Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
The Rand McNally Atlas shows that Gambier had a population of 660 people in 1895 with a post office and railroad service. In 2020, Gambier had a population of 2,502 people.
These communities are listed based on their distance from Gambier, with the one closest to Gambier listed first.
- Monroe Mills
(2 miles [3.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Monroe Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monroe Mills
- Monroe Mills is located in Knox County
- Pipesville
(4 miles [6.4 km] to the east)
- Howard
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Howard have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howard
- Howard is located in Knox County
- Jump to TripAdvisor's Tourism page for Howard <2>
- Mount Vernon
(4 miles [6.4 km] to the west)
- Hunt
(5 miles [8 km] to the southwest)
- Morgan Center
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Morgan Center have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morgan Center
- Morgan Center is located in Knox County
- Millwood
(6 miles [9.7 km] to the east)
- Brandon
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Brandon have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brandon
- Brandon is located in Knox County
- Martinsburg
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Martinsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Martinsburg
- Martinsburg is located in Knox County
- Population from the 2020 Census: 232 people
- Jump to TripAdvisor's Tourism page for Martinsburg <2>
- Bangs
(8 miles [12.9 km] to the west)
- Bladensburg
(8 miles [12.9 km] to the southeast)
- Zuck ‑ Historic
(8 miles [12.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Zuck. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Zuck
- Zuck is located in Knox County
- Google driving directions:
- From your current location to Zuck
- From Gambier to Zuck
- Continue List (17 more) ...
- Buckeye City
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Buckeye City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckeye City
- Buckeye City is located in Knox County
- Danville
(8 miles [12.9 km] to the northeast)
- Utica
(9 miles [14.5 km] to the south)
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Gambier. See our List of 1890's Communities around Gambier.
Newspapers Published in the Vicinity of Gambier ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 126 newspapers that have been published in the area around Gambier.
We have organized these newspapers into two lists:
- A Local Newspaper List - focusing on the papers published in the immediate area of Gambier. There are actually two parts to this list - papers printed in the immediate area of Gambier and those printed in the larger area surrounding Gambier.
- An Extended Newspaper List - a longer list, sorted by paper name and containing those papers published within 22 miles [35.4 km]<6> of Gambier.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Gambier:
- Websites specific to Ohio
- Pages specific to Knox County
- Genealogy information for nearby counties
- Ashland County
- Coshocton County
- Delaware County
- Franklin County
- Holmes County
- Licking County
- Morrow County
- Muskingum County
- Richland County
- Wayne County
- Cemetery Information and Directories for Ohio
Off-the-Road Links ...
Unfortunately, we don't know of a website for Gambier. If you can help, please contact us through our Feedback Page.
The official website for Knox County: www.knoxcountyohio.org/
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Gambier, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Gambier) to Point B.Our distance measurements begin at a specific point in Gambier. The point we use is located at these GPS coordinates - Latitude: 40.3760, Longitude: -82.3970 |