Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Eagleville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Eagleville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Eagleville is located in Wood County.
To see how the shape of Ohio's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Wood County: Hancock, Henry, Lucas, Ottawa, Putnam, Sandusky & Seneca.
Below are the counties that are near Eagleville. For each of these counties, we show a sample of those communities that are closest to Eagleville:
- Wood County (The home county of Eagleville)
- The following are listed by their distance from Eagleville, with the one closest to Eagleville listed first.
- Bloomdale
(Less than 2 miles to the south)
- Note: The GPS coordinates that we are using for Bloomdale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloomdale
- Bloomdale is located in Wood County
- Population from the 2020 Census: 682 people
- Jump to TripAdvisor's Tourism page for Bloomdale <2>
- Bairdstown
(3 miles [4.8 km] to the southwest)
- West Millgrove
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for West Millgrove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Millgrove
- West Millgrove is located in Wood County
- Population from the 2020 Census: 176 people
- Jerry City
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Jerry City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jerry City
- Jerry City is located in Wood County
- Population from the 2020 Census: 437 people
- Six Points
(5 miles [8 km] to the north)
- Cygnet
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Cygnet have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cygnet
- Cygnet is located in Wood County
- Population from the 2020 Census: 622 people
- Jump to TripAdvisor's Tourism page for Cygnet <2>
- North Baltimore
(6 miles [9.7 km] to the west)
- Hammansburg
(7 miles [11.3 km] to the west)
- Risingsun
(8 miles [12.9 km] to the northeast)
- Wayne
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Wayne have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wayne
- Wayne is located in Wood County
- Population from the 2020 Census: 925 people
- Jump to TripAdvisor's Tourism page for Wayne <2>
- Portage
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Portage have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Portage
- Portage is located in Wood County
- Population from the 2020 Census: 490 people
- Bradner
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Bradner have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bradner
- Bradner is located in Wood County
- Population from the 2020 Census: 1,020 people
- Jump to TripAdvisor's Tourism page for Bradner <2>
- Allen County
- Bluffton
(27 miles [43.5 km] to the southwest)
- Crawford County
- Benton
(30 miles [48.3 km] to the southeast)
- Hancock County
- The following are listed by their distance from Eagleville, with the one closest to Eagleville listed first.
- Arcadia
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Arcadia have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arcadia
- Arcadia is located in Hancock County
- Population from the 2020 Census: 587 people
- Jump to TripAdvisor's Tourism page for Arcadia <2>
- Van Buren
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Hancock County
- Population from the 2020 Census: 538 people
- Jump to TripAdvisor's Tourism page for Van Buren <2>
- West Independence
(10 miles [16.1 km] to the southeast)
- Findlay
(11 miles [17.7 km] to the southwest)
- McComb
(13 miles [20.9 km] to the southwest)
- Vanlue
(15 miles [24.1 km] to the south)
- Lewisburg ‑ Historic
(15 miles [24.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Lewisburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lewisburg
- Lewisburg is located in Hancock County
- Google driving directions:
- From your current location to Lewisburg
- From Eagleville to Lewisburg
- Hancock
(15 miles [24.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hancock. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hancock
- Hancock is located in Hancock County
- Google driving directions:
- From your current location to Hancock
- From Eagleville to Hancock
- Benton Ridge
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Benton Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benton Ridge
- Benton Ridge is located in Hancock County
- Population from the 2020 Census: 289 people
- Moffitt ‑ Historic
(19 miles [30.6 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Moffitt. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Moffitt
- Moffitt is located in Hancock County
- Google driving directions:
- From your current location to Moffitt
- From Eagleville to Moffitt
- Mount Blanchard
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Mount Blanchard have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Blanchard
- Mount Blanchard is located in Hancock County
- Population from the 2020 Census: 478 people
- Jump to TripAdvisor's Tourism page for Mount Blanchard <2>
- Rawson
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Rawson have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rawson
- Rawson is located in Hancock County
- Population from the 2020 Census: 552 people
- Jump to TripAdvisor's Tourism page for Rawson <2>
- Hardin County
- The following are listed by their distance from Eagleville, with the one closest to Eagleville listed first.
- Forest
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Forest have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest
- Forest is located in Hardin County
- Population from the 2020 Census: 1,444 people
- Jump to TripAdvisor's Tourism page for Forest <2>
- Dunkirk
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Dunkirk have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunkirk
- Dunkirk is located in Hardin County
- Population from the 2020 Census: 842 people
- Jump to TripAdvisor's Tourism page for Dunkirk <2>
- Patterson
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patterson
- Patterson is located in Hardin County
- Population from the 2020 Census: 135 people
- Dola
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Dola have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dola
- Dola is located in Hardin County
- Jump to TripAdvisor's Tourism page for Dola <2>
- McVitty
(30 miles [48.3 km] to the south)
- Henry County
- The following are listed by their distance from Eagleville, with the one closest to Eagleville listed first.
- Deshler
(18 miles [29 km] to the west)
- McClure
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for McClure have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McClure
- McClure is located in Henry County
- Population from the 2020 Census: 678 people
- Jump to TripAdvisor's Tourism page for McClure <2>
- Hamler
(24 miles [38.6 km] to the west)
- Grelton
(25 miles [40.2 km] to the northwest)
- Malinta
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Malinta have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Malinta
- Malinta is located in Henry County
- Population from the 2020 Census: 252 people
- Jump to TripAdvisor's Tourism page for Malinta <2>
- Colton
(27 miles [43.5 km] to the northwest)
- Elery
(27 miles [43.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Elery. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Elery
- Elery is located in Henry County
- Google driving directions:
- From your current location to Elery
- From Eagleville to Elery
- Liberty Center
(29 miles [46.7 km] to the northwest)
- Holgate
(30 miles [48.3 km] to the west)
- Lucas County
- The following are listed by their distance from Eagleville, with the one closest to Eagleville listed first.
- Bailey ‑ Historic
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Bailey have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bailey
- Bailey is located in Lucas County
- Bailey has also been known as:
- Bailey Station
- Tondagamies Village ‑ Historic
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Tondagamies Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tondagamies Village
- Tondagamies Village is located in Lucas County
- Waterville
(22 miles [35.4 km] to the northwest)
- Whitehouse
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Whitehouse have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitehouse
- Whitehouse is located in Lucas County
- Population from the 2020 Census: 4,932 people
- Jump to TripAdvisor's Tourism page for Whitehouse <2>
- Maumee
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Maumee have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maumee
- Maumee is located in Lucas County
- Population from the 2020 Census: 13,605 people
- Jump to TripAdvisor's Tourism page for Maumee <2>
- East Toledo
(30 miles [48.3 km] to the north)
- Holland
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Holland have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holland
- Holland is located in Lucas County
- Population from the 2020 Census: 1,687 people
- Jump to TripAdvisor's Tourism page for Holland <2>
- Ottawa County
- The following are listed by their distance from Eagleville, with the one closest to Eagleville listed first.
- Elmore
(23 miles [37 km] to the northeast)
- Genoa
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Genoa have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Genoa
- Genoa is located in Ottawa County
- Population from the 2020 Census: 2,262 people
- Jump to TripAdvisor's Tourism page for Genoa <2>
- Clay Center
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Clay Center have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clay Center
- Clay Center is located in Ottawa County
- Population from the 2020 Census: 299 people
- Martin
(27 miles [43.5 km] to the northeast)
- Rocky Ridge
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Rocky Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rocky Ridge
- Rocky Ridge is located in Ottawa County
- Population from the 2020 Census: 407 people
- Curtice
(30 miles [48.3 km] to the north)
- Oak Harbor
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Oak Harbor have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Harbor
- Oak Harbor is located in Ottawa County
- Population from the 2020 Census: 2,692 people
- Jump to TripAdvisor's Tourism page for Oak Harbor <2>
- Putnam County
- The following are listed by their distance from Eagleville, with the one closest to Eagleville listed first.
- Townwood
(18 miles [29 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Townwood. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Townwood
- Townwood is located in Putnam County
- Google driving directions:
- From your current location to Townwood
- From Eagleville to Townwood
- Belmore
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Belmore have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belmore
- Belmore is located in Putnam County
- Population from the 2020 Census: 143 people
- Gilboa
(22 miles [35.4 km] to the southwest)
- Leipsic Junction
(22 miles [35.4 km] to the west)
- Leipsic
(23 miles [37 km] to the west)
- West Leipsic
(24 miles [38.6 km] to the west)
- Pandora
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Pandora have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pandora
- Pandora is located in Putnam County
- Population from the 2020 Census: 1,101 people
- Ottawa
(28 miles [45.1 km] to the southwest)
- Glandorf
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Glandorf have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glandorf
- Glandorf is located in Putnam County
- Population from the 2020 Census: 1,030 people
- Jump to TripAdvisor's Tourism page for Glandorf <2>
- Miller City
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Miller City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Miller City
- Miller City is located in Putnam County
- Population from the 2020 Census: 138 people
- Jump to TripAdvisor's Tourism page for Miller City <2>
- Sandusky County
- The following are listed by their distance from Eagleville, with the one closest to Eagleville listed first.
- Burgoon
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Burgoon have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burgoon
- Burgoon is located in Sandusky County
- Population from the 2020 Census: 163 people
- Helena
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Helena have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Helena
- Helena is located in Sandusky County
- Population from the 2020 Census: 208 people
- Jump to TripAdvisor's Tourism page for Helena <2>
- Gibsonburg
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Gibsonburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gibsonburg
- Gibsonburg is located in Sandusky County
- Population from the 2020 Census: 2,483 people
- Jump to TripAdvisor's Tourism page for Gibsonburg <2>
- Gabels Corner
(20 miles [32.2 km] to the northeast)
- Woodville
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Woodville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodville
- Woodville is located in Sandusky County
- Population from the 2020 Census: 2,008 people
- Jump to TripAdvisor's Tourism page for Woodville <2>
- Ballville
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Ballville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ballville
- Ballville is located in Sandusky County
- Lindsey
(23 miles [37 km] to the northeast)
- Stony Prairie
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Stony Prairie have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stony Prairie
- Stony Prairie is located in Sandusky County
- Fremont
(24 miles [38.6 km] to the northeast)
- Kingsway
(26 miles [41.8 km] to the northeast)
- Green Creek
(27 miles [43.5 km] to the east)
- Shorewood Village
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Shorewood Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shorewood Village
- Shorewood Village is located in Sandusky County
- Seneca County
- The following are listed by their distance from Eagleville, with the one closest to Eagleville listed first.
- Fostoria
(7 miles [11.3 km] to the east)
- Alvada
(12 miles [19.3 km] to the southeast)
- Bascom
(14 miles [22.5 km] to the east)
- New Riegel
(15 miles [24.1 km] to the southeast)
- Bettsville
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Bettsville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bettsville
- Bettsville is located in Seneca County
- Population from the 2020 Census: 618 people
- Jump to TripAdvisor's Tourism page for Bettsville <2>
- Cromers
(17 miles [27.4 km] to the east)
- Maple Grove
(17 miles [27.4 km] to the east)
- Berwick
(17 miles [27.4 km] to the southeast)
- Adrian
(18 miles [29 km] to the southeast)
- Fort Seneca
(20 miles [32.2 km] to the east)
- Tiffin
(20 miles [32.2 km] to the east)
- McCutchenville
(20 miles [32.2 km] to the southeast)
- Wyandot County
- The following are listed by their distance from Eagleville, with the one closest to Eagleville listed first.
- Carey
(19 miles [30.6 km] to the southeast)
- Wharton
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Wharton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wharton
- Wharton is located in Wyandot County
- Population from the 2020 Census: 338 people
- Mexico
(23 miles [37 km] to the southeast)
- Belle Vernon
(26 miles [41.8 km] to the southeast)
- Sycamore
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Sycamore have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sycamore
- Sycamore is located in Wyandot County
- Population from the 2020 Census: 811 people
- Kirby
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Kirby have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kirby
- Kirby is located in Wyandot County
- Population from the 2020 Census: 112 people
- Jump to TripAdvisor's Tourism page for Kirby <2>
- Duenquat
(28 miles [45.1 km] to the southeast)
- Upper Sandusky
(29 miles [46.7 km] to the southeast)
For an expanded list of the communities that are closest to Eagleville, see our County-by-County Page for Eagleville.
Cemeteries Near Eagleville ...
Below are cemeteries that are in the vicinity of Eagleville.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Eagleville covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Eagleville, with the one closest to Eagleville listed first.
- Chapel Cemetery
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for the Chapel Cemetery
- Note: The GPS coordinates that we are using for the Chapel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Weaver Cemetery
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for the Weaver Cemetery
- Note: The GPS coordinates that we are using for the Weaver Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Ark Cemetery
(3 miles [4.8 km] to the southeast)
- Perry Center Cemetery
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for the Perry Center Cemetery
- Note: The GPS coordinates that we are using for the Perry Center Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Riverview Cemetery
(4 miles [6.4 km] to the northeast)
- Jerry City Cemetery
(4 miles [6.4 km] to the northwest)
- Mennonite Cemetery
(4 miles [6.4 km] to the north)
- Jump to our Gazetteer entry for the Mennonite Cemetery
- Note: The GPS coordinates that we are using for the Mennonite Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Mt. Zion Cemetery
(4 miles [6.4 km] to the north)
- Jump to our Gazetteer entry for the Mt. Zion Cemetery
- Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Bechel Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Bechel Cemetery
- Note: The GPS coordinates that we are using for the Bechel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Cygnet Cemetery
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for the Cygnet Cemetery
- Note: The GPS coordinates that we are using for the Cygnet Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Maple Cemetery
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for the Maple Cemetery
- Note: The GPS coordinates that we are using for the Maple Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Maplewood Cemetery
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for the Maplewood Cemetery
- Note: The GPS coordinates that we are using for the Maplewood Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Continue List (391 more) ...
- Radar Cemetery
(6 miles [9.7 km] to the southwest)
- Jump to our Gazetteer entry for the Radar Cemetery
- Note: The GPS coordinates that we are using for the Radar Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Hamlin Cemetery
(6 miles [9.7 km] to the south)
- Knollcrest Cemetery
(6 miles [9.7 km] to the south)
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
While we didn't find Eagleville in the Atlas, the following 1895 communities would have been found near the current location of Eagleville.
These communities are listed based on their distance from Eagleville, with the one closest to Eagleville listed first.
- Bloomdale
(Less than 2 miles to the south)
- Note: The GPS coordinates that we are using for Bloomdale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloomdale
- Bloomdale is located in Wood County
- Population from the 2020 Census: 682 people
- Jump to TripAdvisor's Tourism page for Bloomdale <2>
- Bairdstown
(3 miles [4.8 km] to the southwest)
- Galatea
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Galatea have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galatea
- Galatea is located in Wood County
- West Millgrove
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for West Millgrove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Millgrove
- West Millgrove is located in Wood County
- Population from the 2020 Census: 176 people
- Jerry City
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Jerry City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jerry City
- Jerry City is located in Wood County
- Population from the 2020 Census: 437 people
- Oil Center ‑ Historic
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Oil Center have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oil Center
- Oil Center is located in Wood County
- Six Points
(5 miles [8 km] to the north)
- Hatton
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Hatton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hatton
- Hatton is located in Wood County
- Cygnet
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Cygnet have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cygnet
- Cygnet is located in Wood County
- Population from the 2020 Census: 622 people
- Jump to TripAdvisor's Tourism page for Cygnet <2>
- Van Buren
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Hancock County
- Population from the 2020 Census: 538 people
- Jump to TripAdvisor's Tourism page for Van Buren <2>
- Wineland ‑ Historic
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Wineland have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wineland
- Wineland is located in Hancock County
- Arcadia
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Arcadia have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arcadia
- Arcadia is located in Hancock County
- Population from the 2020 Census: 587 people
- Jump to TripAdvisor's Tourism page for Arcadia <2>
- Continue List (16 more) ...
- Trombley
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Trombley have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trombley
- Trombley is located in Wood County
- North Baltimore
(6 miles [9.7 km] to the west)
- Mortimer
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Mortimer have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mortimer
- Mortimer is located in Hancock County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Eagleville. See our List of 1890's Communities around Eagleville.
Newspapers Published in Eagleville ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 53 newspapers that have been published in the area around Eagleville.
Although we're unaware of any newspapers that were published in the immediate area of Eagleville, there are papers which were published within 22 miles [35.4 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Eagleville.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Eagleville:
- Websites specific to Ohio
- Pages specific to Wood County
- Genealogy information for nearby counties
- Allen County
- Crawford County
- Hancock County
- Hardin County
- Henry County
- Lucas County
- Ottawa County
- Putnam County
- Sandusky County
- Seneca County
- Wyandot County
- Cemetery Information and Directories for Ohio
Off-the-Road Links ...
Unfortunately, we don't know of a website for Eagleville. If you can help, please contact us through our Feedback Page.
The official website for Wood County: www.co.wood.oh.us/
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Eagleville, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Eagleville) to Point B.Our distance measurements begin at a specific point in Eagleville. The point we use is located at these GPS coordinates - Latitude: 41.1975, Longitude: -83.5542 |