Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Concordia Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Concordia Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Concordia Cemetery. We've listed the following communities based on their distance, with the closest first.

Crosby
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for Crosby
- Crosby is located in Divide County
- Population from the 2020 Census: 1,293 people
- Jump to TripAdvisor's Tourism page for Crosby <2>
Ambrose
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Ambrose have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ambrose
- Ambrose is located in Divide County
- Population from the 2020 Census: 25 people
- Jump to TripAdvisor's Tourism page for Ambrose <2>
Noonan
(11 miles [17.7 km] to the east)
- Jump to our Gazetteer entry for Noonan
- Noonan is located in Divide County
- Population from the 2020 Census: 125 people
- Jump to TripAdvisor's Tourism page for Noonan <2>
Marienthal
(12 miles [19.3 km] to the northwest)
- Jump to our Gazetteer entry for Marienthal
Wildrose
(18 miles [29 km] to the south)
- Jump to our Gazetteer entry for Wildrose
- Wildrose is located in Williams County
- Population from the 2020 Census: 155 people
- Jump to TripAdvisor's Tourism page for Wildrose <2>
Larson
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Larson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Larson
- Larson is located in Burke County
Corinth
(19 miles [30.6 km] to the south)
- Jump to our Gazetteer entry for Corinth
- Corinth is located in Williams County
Torquay
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Torquay came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Torquay
Hamlet
(20 miles [32.2 km] to the southeast)
- Jump to our Gazetteer entry for Hamlet
- Hamlet is located in Williams County
Estevan
(20 miles [32.2 km] to the northeast)
- Jump to our Gazetteer entry for Estevan
- Jump to TripAdvisor's Tourism page for Estevan <2>
Columbus
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Columbus have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Columbus
- Columbus is located in Burke County
- Population from the 2020 Census: 139 people
- Jump to TripAdvisor's Tourism page for Columbus <2>
Stady ‑ Historic
(23 miles [37 km] to the southwest)
- Jump to our Gazetteer entry for Stady
- Stady is located in Divide County
Alamo
(23 miles [37 km] to the southwest)
- Jump to our Gazetteer entry for Alamo
- Alamo is located in Williams County
- Population from the 2020 Census: 81 people
- Jump to TripAdvisor's Tourism page for Alamo <2>
Hitchcock Bay
(23 miles [37 km] to the north)
- Jump to our Gazetteer entry for Hitchcock Bay
Fortuna
(23 miles [37 km] to the west)
- Jump to our Gazetteer entry for Fortuna
- Fortuna is located in Divide County
- Population from the 2020 Census: 21 people
- Jump to TripAdvisor's Tourism page for Fortuna <2>
Roche Percee
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Roche Percee came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Roche Percee
- Jump to TripAdvisor's Tourism page for Roche Percee <2>
McGregor
(25 miles [40.2 km] to the southeast)
- Jump to our Gazetteer entry for McGregor
- McGregor is located in Williams County
- Jump to TripAdvisor's Tourism page for McGregor <2>
Appam
(26 miles [41.8 km] to the southwest)
- Jump to our Gazetteer entry for Appam
- Appam is located in Williams County
Bienfait
(26 miles [41.8 km] to the northeast)
- Jump to our Gazetteer entry for Bienfait
Bromhead
(27 miles [43.5 km] to the northwest)
- Jump to our Gazetteer entry for Bromhead
Alkabo
(28 miles [45.1 km] to the west)
- Jump to our Gazetteer entry for Alkabo
- Alkabo is located in Divide County
Zahl
(29 miles [46.7 km] to the southwest)
- Jump to our Gazetteer entry for Zahl
- Zahl is located in Williams County
- Jump to TripAdvisor's Tourism page for Zahl <2>
Rival ‑ Historic
(29 miles [46.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Rival. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Rival
- Rival is located in Burke County
Macoun
(29 miles [46.7 km] to the north)
- Jump to our Gazetteer entry for Macoun
Oungre
(29 miles [46.7 km] to the northwest)
- Jump to our Gazetteer entry for Oungre

Off-the-Road Links ...

The official website for State of North Dakota: https://www.nd.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Concordia Cemetery. The point we use is located at these GPS coordinates - Latitude: 48.8936, Longitude: -103.2649 In this case, the coordinates for the Concordia Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>	If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database.
<5>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.