RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Montana >> Toole County >> Ferdig >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Montana

The Commemorative Quarter for Montana





Nearest Communities to Ferdig,
Listed County-By-County

The purpose of this page is to identify those communities that are closest to Ferdig, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Ferdig:

We have great-grandparents who lived in a small community in the northwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.

Please note that when we give a distance, it's a 'straight-line' distance.<1>

If you're researching your genealogy, we hope that the following information helps.

Ferdig is located in Toole County.

The following 3 counties adjoin and form the boundaries of Toole County: Glacier, Liberty & Pondera.

Our Gazetteer shows that there are 29 communities within 40 miles [64.4 km]<1> of Ferdig. Of these communities, 10 are located in counties other than Toole County.

We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.

After starting with the home county for Ferdig (which is Toole County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Ferdig

For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.

  • Toole County   (where Ferdig resides)
    • County Seat for Toole:   Shelby
    • Genealogy Websites   ...
    • Nearest Communities to Ferdig   ...
      • These communities are listed by their distance from Ferdig.
      • Oilmont
        (3 miles [4.8 km] to the west)
      • Ohio Camp
        (6 miles [9.7 km] to the northwest)
        • Note: The GPS coordinates that we are using for Ohio Camp have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Ohio Camp
        • Ohio Camp is located in Toole County
      • Kippen
        (7 miles [11.3 km] to the east)
        • Note: The GPS coordinates that we are using for Kippen have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Kippen
        • Kippen is located in Toole County
      • Kevin
        (8 miles [12.9 km] to the west)
        • Note: The GPS coordinates that we are using for Kevin have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Kevin
        • Kevin is located in Toole County
        • Population from the 2020 Census: 136 people
        • Jump to TripAdvisor's Tourism page for Kevin <3>
      • Sunburst
        (10 miles [16.1 km] to the northwest)
        • Note: The GPS coordinates that we are using for Sunburst have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sunburst
        • Sunburst is located in Toole County
        • Population from the 2020 Census: 328 people
        • Jump to TripAdvisor's Tourism page for Sunburst <3>
      • Aloe
        (12 miles [19.3 km] to the southwest)
        • Note: The GPS coordinates that we are using for Aloe have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Aloe
        • Aloe is located in Toole County
      • McDermott ‑ Historic
        (15 miles [24.1 km] to the northeast)
        • Note: The GPS coordinates that we are using for McDermott have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for McDermott
        • McDermott is located in Toole County
      • Virden
        (16 miles [25.7 km] to the south)
        • Note: The GPS coordinates that we are using for Virden have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Virden
        • Virden is located in Toole County
      • Rim Rock Colony
        (17 miles [27.4 km] to the northwest)
        • Jump to our Gazetteer entry for Rim Rock Colony
        • Rim Rock Colony is located in Toole County
      • Shelby
        (17 miles [27.4 km] to the south)
      • Sweet Grass
        (18 miles [29 km] to the northwest)
        • Jump to our Gazetteer entry for Sweet Grass
        • Sweet Grass is located in Toole County
      • Gold Butte
        (19 miles [30.6 km] to the northeast)
        • Note: The GPS coordinates that we are using for Gold Butte have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Gold Butte
        • Gold Butte is located in Toole County
      • Continue List   (7 more) ...
        • Dunkirk
          (19 miles [30.6 km] to the south)
          • Note: The GPS coordinates that we are using for Dunkirk have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Dunkirk
          • Dunkirk is located in Toole County
        • Demers ‑ Historic
          (20 miles [32.2 km] to the northwest)
          • Note: The GPS coordinates that we are using for Demers have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Demers
          • Demers is located in Toole County
        • Hillside Colony
          (20 miles [32.2 km] to the northwest)
          • Note: The GPS coordinates that we are using for Hillside Colony have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hillside Colony
          • Hillside Colony is located in Toole County
        • Ethridge
          (20 miles [32.2 km] to the southwest)
        • Devon
          (24 miles [38.6 km] to the southeast)
          • Note: The GPS coordinates that we are using for Devon have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Devon
          • Devon is located in Toole County
        • Naismith
          (25 miles [40.2 km] to the south)
          • Note: The GPS coordinates that we are using for Naismith have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Naismith
          • Naismith is located in Toole County
        • Galata
          (27 miles [43.5 km] to the southeast)
  • Glacier County
    • County Seat for Glacier:   Cut Bank
    • Genealogy Websites   ...
    • Nearest Communities to Ferdig   ...
      • These communities are listed by their distance from Ferdig.
      • Glacier Colony
        (20 miles [32.2 km] to the west)
        • Note: The GPS coordinates that we are using for Glacier Colony have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Glacier Colony
        • Glacier Colony is located in Glacier County
      • Santa Rita
        (25 miles [40.2 km] to the west)
      • Tipville ‑ Historic
        (25 miles [40.2 km] to the west)
        • Note: The GPS coordinates that we are using for Tipville have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Tipville
        • Tipville is located in Glacier County
      • Cut Bank
        (26 miles [41.8 km] to the west)
      • Korner ‑ Historic
        (27 miles [43.5 km] to the northwest)
        • Note: The GPS coordinates that we are using for Korner have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Korner
        • Korner is located in Glacier County
  • Liberty County
    • County Seat for Liberty:   Chester
    • Genealogy Websites   ...
    • Nearest Communities to Ferdig   ...
      • These communities are listed by their distance from Ferdig.
      • Eagle Creek Colony
        (26 miles [41.8 km] to the east)
        • Note: The GPS coordinates that we are using for Eagle Creek Colony have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Eagle Creek Colony
        • Eagle Creek Colony is located in Liberty County
      • Whitlash
        (26 miles [41.8 km] to the northeast)
      • Hill
        (28 miles [45.1 km] to the east)
        • Note: The GPS coordinates that we are using for Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Hill
        • Hill is located in Liberty County
  • Pondera County
    • County Website:   www.ponderacountymontana.org/
    • County Seat for Pondera:   Conrad
    • Genealogy Websites   ...
    • Nearest Communities to Ferdig   ...
      • These communities are listed by their distance from Ferdig.
      • Lone Tree ‑ Historic
        (28 miles [45.1 km] to the southwest)
        • Note: The GPS coordinates that we are using for Lone Tree have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lone Tree
        • Lone Tree is located in Pondera County
      • Fowler
        (30 miles [48.3 km] to the south)
        • Note: The GPS coordinates that we are using for Fowler have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Fowler
        • Fowler is located in Pondera County

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Ferdig) to Point B.Our distance measurements begin at a specific point in Ferdig. The point we use is located at these GPS coordinates - Latitude: 48.7542, Longitude: -111.7750       In this case, the coordinates for Ferdig have been provided by the Geographic Names Information System (GNIS).
<2>Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.

We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.

Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 14 Jul 2025