Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Sallis had a population of 156 people in 1895 with a post office and railroad service. In 2020, Sallis had a population of 128 people.
The following communities are listed based on their distance from Sallis, with the one closest to Sallis listed first.
- McAdams
(4 miles [6.4 km] to the east)
- McAdams is located in Attala County
- Jump to our Gazetteer entry for McAdams
- Newport
(5 miles [8 km] to the south)
- Newport is located in Attala County
- Jump to our Gazetteer entry for Newport
- Durant
(6 miles [9.7 km] to the northwest)
- Goodman
(9 miles [14.5 km] to the southwest)
- McVille
(10 miles [16.1 km] to the southeast)
- McVille is located in Attala County
- Jump to our Gazetteer entry for McVille
- Kosciusko
(10 miles [16.1 km] to the east)
- Shrock ‑ Historic
(11 miles [17.7 km] to the southwest)
- Shrock is located in Attala County
- Jump to our Gazetteer entry for Shrock
- Hesterville
(11 miles [17.7 km] to the northeast)
- Hesterville is located in Attala County
- Jump to our Gazetteer entry for Hesterville
- Thomastown
(12 miles [19.3 km] to the southeast)
- Thomastown is located in Leake County
- Jump to our Gazetteer entry for Thomastown
- Richland
(13 miles [20.9 km] to the west)
- Richland is located in Holmes County
- Jump to our Gazetteer entry for Richland
- Franklin
(13 miles [20.9 km] to the west)
- Franklin is located in Holmes County
- Jump to our Gazetteer entry for Franklin
- Cameron
(14 miles [22.5 km] to the southwest)
- Cameron is located in Madison County
- Jump to our Gazetteer entry for Cameron
- Pickens
(15 miles [24.1 km] to the southwest)
- Conway
(15 miles [24.1 km] to the southeast)
- Conway is located in Leake County
- Jump to our Gazetteer entry for Conway
- Smyrna
(16 miles [25.7 km] to the east)
- Smyrna is located in Attala County
- Jump to our Gazetteer entry for Smyrna
- Chita ‑ Historic
(16 miles [25.7 km] to the northeast)
- Chita is located in Attala County
- Jump to our Gazetteer entry for Chita
- Camden
(17 miles [27.4 km] to the south)
- Saint Ann
(17 miles [27.4 km] to the south)
- Saint Ann is located in Leake County
- Jump to our Gazetteer entry for Saint Ann
- Beatty
(17 miles [27.4 km] to the north)
- Beatty is located in Carroll County
- Jump to our Gazetteer entry for Beatty
- Lexington
(17 miles [27.4 km] to the west)
- Revive
(18 miles [29 km] to the south)
- Revive is located in Madison County
- Jump to our Gazetteer entry for Revive
- Ethel
(18 miles [29 km] to the northeast)
- Ethel is located in Attala County
- Jump to our Gazetteer entry for Ethel
- Population from the 2020 Census: 381 people
- Emory
(18 miles [29 km] to the northwest)
- Emory is located in Holmes County
- Jump to our Gazetteer entry for Emory
- Ebenezer
(19 miles [30.6 km] to the west)
- Ebenezer is located in Holmes County
- Jump to our Gazetteer entry for Ebenezer
- Oaks
(19 miles [30.6 km] to the southwest)
- Oaks is located in Madison County
- Jump to our Gazetteer entry for Oaks
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Sallis, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |