RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Michigan >> Clinton County >> Gunnisonville >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Michigan

The Commemorative Quarter for Michigan





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Gunnisonville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Gunnisonville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Gunnisonville is located in Clinton County.

To see how the shape of Michigan's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Clinton County: Eaton, Gratiot, Ingham, Ionia, Montcalm, Saginaw & Shiawassee.

Below are the counties that are near Gunnisonville. For each of these counties, we show a sample of those communities that are closest to Gunnisonville:

  • Clinton County     (The home county of Gunnisonville)
    • The following are listed by their distance from Gunnisonville, with the one closest to Gunnisonville listed first.
    • Clinton Village
      (Less than 2 miles to the south)
      • Note: The GPS coordinates that we are using for Clinton Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clinton Village
      • Clinton Village is located in Clinton County
    • East DeWitt
      (2 miles [3.2 km] to the north)
      • Jump to our Gazetteer entry for East DeWitt
      • East DeWitt is located in Clinton County
    • Bath
      (3 miles [4.8 km] to the east)
      • Note: The GPS coordinates that we are using for Bath have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bath
      • Bath is located in Clinton County
      • Jump to TripAdvisor's Tourism page for Bath <2>
    • De Witt
      (3 miles [4.8 km] to the northwest)
    • Price
      (8 miles [12.9 km] to the north)
      • Note: The GPS coordinates that we are using for Price have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Price
      • Price is located in Clinton County
    • Saint Johns
      (13 miles [20.9 km] to the north)
      • Note: The GPS coordinates that we are using for Saint Johns have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Johns
      • Saint Johns is located in Clinton County
      • Population from the 2020 Census: 7,904 people
      • Jump to TripAdvisor's Tourism page for Saint Johns <2>
    • Eagle
      (13 miles [20.9 km] to the west)
    • Shepardsville
      (14 miles [22.5 km] to the north)
      • Jump to our Gazetteer entry for Shepardsville
      • Shepardsville is located in Clinton County
    • Ovid
      (15 miles [24.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Ovid have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ovid
      • Ovid is located in Clinton County
      • Population from the 2020 Census: 1,607 people
      • Jump to TripAdvisor's Tourism page for Ovid <2>
    • Duplain
      (16 miles [25.7 km] to the north)
      • Jump to our Gazetteer entry for Duplain
      • Duplain is located in Clinton County
    • Westphalia
      (16 miles [25.7 km] to the northwest)
    • Fowler
      (17 miles [27.4 km] to the northwest)
    • Elsie
      (20 miles [32.2 km] to the north)
  • Eaton County
    • The following are listed by their distance from Gunnisonville, with the one closest to Gunnisonville listed first.
    • Waverly
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Waverly have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Waverly
      • Waverly is located in Eaton County
    • Grand Ledge
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Grand Ledge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grand Ledge
      • Grand Ledge is located in Eaton County
      • Population from the 2020 Census: 7,881 people
      • Jump to TripAdvisor's Tourism page for Grand Ledge <2>
    • Dimondale
      (13 miles [20.9 km] to the southwest)
    • Kingsland
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Kingsland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kingsland
      • Kingsland is located in Eaton County
    • Potterville
      (17 miles [27.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Potterville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Potterville
      • Potterville is located in Eaton County
      • Population from the 2020 Census: 2,765 people
      • Jump to TripAdvisor's Tourism page for Potterville <2>
    • Petrieville
      (19 miles [30.6 km] to the south)
      • Jump to our Gazetteer entry for Petrieville
      • Petrieville is located in Eaton County
    • Needmore
      (19 miles [30.6 km] to the southwest)
      • Jump to our Gazetteer entry for Needmore
      • Needmore is located in Eaton County
    • Mulliken
      (19 miles [30.6 km] to the west)
    • Eaton Rapids
      (22 miles [35.4 km] to the south)
    • Gresham
      (22 miles [35.4 km] to the southwest)
      • Jump to our Gazetteer entry for Gresham
      • Gresham is located in Eaton County
    • Stalls Corner
      (22 miles [35.4 km] to the southwest)
      • Jump to our Gazetteer entry for Stalls Corner
      • Stalls Corner is located in Eaton County
    • Charlotte
      (23 miles [37 km] to the southwest)
    • Little Venice
      (23 miles [37 km] to the west)
      • Jump to our Gazetteer entry for Little Venice
      • Little Venice is located in Eaton County
  • Gratiot County
    • The following are listed by their distance from Gunnisonville, with the one closest to Gunnisonville listed first.
    • Bannister
      (22 miles [35.4 km] to the north)
    • Ashley
      (25 miles [40.2 km] to the north)
    • Pompeii
      (25 miles [40.2 km] to the north)
    • Perrinton
      (26 miles [41.8 km] to the north)
      • Jump to our Gazetteer entry for Perrinton
      • Perrinton is located in Gratiot County
      • Population from the 2020 Census: 391 people
    • Middleton
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Middleton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Middleton
      • Middleton is located in Gratiot County
      • Jump to TripAdvisor's Tourism page for Middleton <2>
    • North Star
      (30 miles [48.3 km] to the north)
      • Jump to our Gazetteer entry for North Star
      • North Star is located in Gratiot County
      • North Star has also been known as:
      • Northstar
  • Ingham County
    • The following are listed by their distance from Gunnisonville, with the one closest to Gunnisonville listed first.
    • North Lansing
      (3 miles [4.8 km] to the south)
      • Jump to our Gazetteer entry for North Lansing
      • North Lansing is located in Ingham County
    • East Lansing
      (5 miles [8 km] to the south)
      • Note: The GPS coordinates that we are using for East Lansing have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Lansing
      • East Lansing is located in Ingham County
      • Population from the 2020 Census: 47,641 people
      • Jump to TripAdvisor's Tourism page for East Lansing <2>
    • Lansing
      (5 miles [8 km] to the south)
    • Edgemont Park
      (5 miles [8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Edgemont Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Edgemont Park
      • Edgemont Park is located in Ingham County
    • Haslett
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Haslett have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Haslett
      • Haslett is located in Ingham County
      • Jump to TripAdvisor's Tourism page for Haslett <2>
    • Okemos
      (7 miles [11.3 km] to the southeast)
    • Holt
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Holt have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Holt
      • Holt is located in Ingham County
      • Jump to TripAdvisor's Tourism page for Holt <2>
    • Williamston
      (14 miles [22.5 km] to the southeast)
    • Mason
      (16 miles [25.7 km] to the south)
      • Note: The GPS coordinates that we are using for Mason have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mason
      • Mason is located in Ingham County
      • Population from the 2020 Census: 8,389 people
      • Jump to TripAdvisor's Tourism page for Mason <2>
    • Pollok ‑ Historic
      (16 miles [25.7 km] to the southeast)
      • Jump to our Gazetteer entry for Pollok
      • Pollok is located in Ingham County
      • Pollok has also been known as:
      • Pollock
    • Dansville
      (20 miles [32.2 km] to the southeast)
    • Webberville
      (20 miles [32.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Webberville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Webberville
      • Webberville is located in Ingham County
      • Population from the 2020 Census: 1,300 people
      • Jump to TripAdvisor's Tourism page for Webberville <2>
    • North Leslie
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for North Leslie have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Leslie
      • North Leslie is located in Ingham County
  • Ionia County
    • The following are listed by their distance from Gunnisonville, with the one closest to Gunnisonville listed first.
    • Portland
      (19 miles [30.6 km] to the west)
    • Pewamo
      (20 miles [32.2 km] to the northwest)
    • Matherton
      (23 miles [37 km] to the northwest)
      • Jump to our Gazetteer entry for Matherton
      • Matherton is located in Ionia County
    • Lyons
      (24 miles [38.6 km] to the northwest)
    • Muir
      (24 miles [38.6 km] to the northwest)
    • Hubbardston
      (25 miles [40.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hubbardston have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hubbardston
      • Hubbardston is located in Ionia County
      • Population from the 2020 Census: 402 people
      • Jump to TripAdvisor's Tourism page for Hubbardston <2>
    • West Sebewa
      (26 miles [41.8 km] to the west)
      • Jump to our Gazetteer entry for West Sebewa
      • West Sebewa is located in Ionia County
    • Ionia
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Ionia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ionia
      • Ionia is located in Ionia County
      • Population from the 2020 Census: 10,997 people
      • Jump to TripAdvisor's Tourism page for Ionia <2>
    • South Ionia
      (29 miles [46.7 km] to the west)
      • Jump to our Gazetteer entry for South Ionia
      • South Ionia is located in Ionia County
  • Jackson County
    • The following are listed by their distance from Gunnisonville, with the one closest to Gunnisonville listed first.
    • Berryville
      (28 miles [45.1 km] to the south)
      • Jump to our Gazetteer entry for Berryville
      • Berryville is located in Jackson County
    • Rives Junction
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Rives Junction have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rives Junction
      • Rives Junction is located in Jackson County
    • Tompkins
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Tompkins have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tompkins
      • Tompkins is located in Jackson County
  • Livingston County
    • The following are listed by their distance from Gunnisonville, with the one closest to Gunnisonville listed first.
    • Fowlerville
      (25 miles [40.2 km] to the southeast)
    • Parkers Corners
      (26 miles [41.8 km] to the southeast)
      • Jump to our Gazetteer entry for Parkers Corners
      • Parkers Corners is located in Livingston County
    • Cohoctah
      (29 miles [46.7 km] to the east)
      • Jump to our Gazetteer entry for Cohoctah
      • Cohoctah is located in Livingston County
    • Oak Grove
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Oak Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Grove
      • Oak Grove is located in Livingston County
  • Montcalm County
    • Carson City
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Carson City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Carson City
      • Carson City is located in Montcalm County
      • Population from the 2020 Census: 1,105 people
      • Jump to TripAdvisor's Tourism page for Carson City <2>
  • Saginaw County
    • The following are listed by their distance from Gunnisonville, with the one closest to Gunnisonville listed first.
    • Chapin
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Chapin
      • Chapin is located in Saginaw County
    • Fenmore
      (26 miles [41.8 km] to the north)
      • Jump to our Gazetteer entry for Fenmore
      • Fenmore is located in Saginaw County
    • Oakley
      (28 miles [45.1 km] to the northeast)
  • Shiawassee County
    • The following are listed by their distance from Gunnisonville, with the one closest to Gunnisonville listed first.
    • Laingsburg
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Laingsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Laingsburg
      • Laingsburg is located in Shiawassee County
      • Population from the 2020 Census: 1,283 people
      • Jump to TripAdvisor's Tourism page for Laingsburg <2>
    • Shaftsburg
      (11 miles [17.7 km] to the east)
      • Note: The GPS coordinates that we are using for Shaftsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shaftsburg
      • Shaftsburg is located in Shiawassee County
    • Perry
      (15 miles [24.1 km] to the east)
      • Jump to our Gazetteer entry for Perry
      • Perry is located in Shiawassee County
      • Population from the 2020 Census: 2,075 people
      • Jump to TripAdvisor's Tourism page for Perry <2>
    • Morrice
      (17 miles [27.4 km] to the east)
      • Note: The GPS coordinates that we are using for Morrice have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morrice
      • Morrice is located in Shiawassee County
      • Population from the 2020 Census: 906 people
      • Jump to TripAdvisor's Tourism page for Morrice <2>
    • Burton
      (17 miles [27.4 km] to the northeast)
      • Jump to our Gazetteer entry for Burton
      • Burton is located in Shiawassee County
    • Five Points
      (19 miles [30.6 km] to the northeast)
      • Jump to our Gazetteer entry for Five Points
      • Five Points is located in Shiawassee County
    • Nicholson
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Nicholson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nicholson
      • Nicholson is located in Shiawassee County
    • Owosso
      (21 miles [33.8 km] to the northeast)
      • Jump to our Gazetteer entry for Owosso
      • Owosso is located in Shiawassee County
      • Population from the 2020 Census: 14,338 people
      • Jump to TripAdvisor's Tourism page for Owosso <2>
    • Smith Crossing
      (21 miles [33.8 km] to the northeast)
      • Jump to our Gazetteer entry for Smith Crossing
      • Smith Crossing is located in Shiawassee County
    • Middletown
      (22 miles [35.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Middletown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Middletown
      • Middletown is located in Shiawassee County
    • Bancroft
      (23 miles [37 km] to the east)
      • Note: The GPS coordinates that we are using for Bancroft have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bancroft
      • Bancroft is located in Shiawassee County
      • Population from the 2020 Census: 494 people
      • Jump to TripAdvisor's Tourism page for Bancroft <2>
    • Newburg
      (23 miles [37 km] to the east)
      • Jump to our Gazetteer entry for Newburg
      • Newburg is located in Shiawassee County
    • Corunna
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Corunna have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Corunna
      • Corunna is located in Shiawassee County
      • Population from the 2020 Census: 3,320 people
      • Jump to TripAdvisor's Tourism page for Corunna <2>

For an expanded list of the communities that are closest to Gunnisonville, see our County-by-County Page for Gunnisonville.

Newspapers Published in Gunnisonville ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 143 newspapers that have been published in the area around Gunnisonville.

Although we're unaware of any newspapers that were published in the immediate area of Gunnisonville, there are papers which were published within 30 miles [48.3 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Gunnisonville.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Gunnisonville:

Cemeteries Near Gunnisonville ...

Below are cemeteries that are in the vicinity of Gunnisonville.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Gunnisonville covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Gunnisonville, with the one closest to Gunnisonville listed first.

  • Gunnisonville Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Gunnisonville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Gunnisonville Cemetery
  • Hurd Cemetery
    (2 miles [3.2 km] to the west)
    • Note: The GPS coordinates that we are using for the Hurd Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hurd Cemetery
  • Pleasant Hill Cemetery
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for the Pleasant Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Pleasant Hill Cemetery
  • Wilsey Cemetery
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for the Wilsey Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Wilsey Cemetery
  • DeWitt City Cemetery
    (3 miles [4.8 km] to the northwest)
    • To give a relative sense of its location, the DeWitt City Cemetery is a large cemetery that is located in De Witt.
    • The DeWitt City Cemetery has also been known as:
    • DeWitt Cemetery
    • Jump to our Gazetteer entry for the DeWitt City Cemetery
    • Jump to Find-A-Grave: FG ID #375405 <4>
  • Chapel Hill Memorial Gardens
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Chapel Hill Memorial Gardens have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Chapel Hill Memorial Gardens
  • St. Joseph Cemetery
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the St. Joseph Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Joseph Cemetery
  • Hillside Cemetery
    (6 miles [9.7 km] to the southwest)
  • St. David's Memorial Garden
    (6 miles [9.7 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for the St. David's Memorial Garden. Although the coordinates have been estimated, they should be in the vicinity.<5>
    • Jump to our Gazetteer entry for the St. David's Memorial Garden
    • Jump to Find-A-Grave: FG ID #2580067 <4>
  • Alward Lake Cemetery
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Alward Lake Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Alward Lake Cemetery
  • Rose Cemetery
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for the Rose Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Rose Cemetery
  • South Riley Cemetery
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for the South Riley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the South Riley Cemetery
  • Continue List   (268 more) ...
    • Mt. Hope Cemetery
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for the Mt. Hope Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Mt. Hope Cemetery
    • Evergreen Cemetery
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for the Evergreen Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Evergreen Cemetery
    • River Bend Cemetery
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for the River Bend Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the River Bend Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

The Rand McNally Atlas shows that in 1895, Gunnisonville had a post office and no railroad service.

These communities are listed based on their distance from Gunnisonville, with the one closest to Gunnisonville listed first.

  • North Lansing
    (3 miles [4.8 km] to the south)
    • Jump to our Gazetteer entry for North Lansing
    • North Lansing is located in Ingham County
  • Bath
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for Bath have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bath
    • Bath is located in Clinton County
    • Jump to TripAdvisor's Tourism page for Bath <2>
  • De Witt
    (3 miles [4.8 km] to the northwest)
  • Lansing
    (5 miles [8 km] to the south)
  • Okemos
    (7 miles [11.3 km] to the southeast)
  • South Riley
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for South Riley have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Riley
    • South Riley is located in Clinton County
  • Price
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Price have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Price
    • Price is located in Clinton County
  • Millett
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Millett have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Millett
    • Millett is located in Eaton County
    • Millett has also been known as:
    • Milletts
  • Packard
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Packard have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Packard
    • Packard is located in Eaton County
  • Wacousta
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for Wacousta have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wacousta
    • Wacousta is located in Clinton County
  • Laingsburg
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Laingsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Laingsburg
    • Laingsburg is located in Shiawassee County
    • Population from the 2020 Census: 1,283 people
    • Jump to TripAdvisor's Tourism page for Laingsburg <2>
  • Riley
    (10 miles [16.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Riley have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Riley
    • Riley is located in Clinton County
  • Continue List   (14 more) ...
    • Holt
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Holt have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Holt
      • Holt is located in Ingham County
      • Jump to TripAdvisor's Tourism page for Holt <2>
    • Meridian
      (11 miles [17.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Meridian have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Meridian
      • Meridian is located in Ingham County
    • Shaftsburg
      (11 miles [17.7 km] to the east)
      • Note: The GPS coordinates that we are using for Shaftsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shaftsburg
      • Shaftsburg is located in Shiawassee County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Gunnisonville. See our List of 1890's Communities around Gunnisonville.

Unfortunately, we don't know of a website for Gunnisonville. If you can help, please contact us through our Feedback Page.

The official website for Clinton County: www.clinton-county.org/

The official website for State of Michigan: https://www.michigan.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Gunnisonville) to Point B.Our distance measurements begin at a specific point in Gunnisonville. The point we use is located at these GPS coordinates - Latitude: 42.8131, Longitude: -84.5231    
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Gunnisonville, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024