RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maine >> Hancock County >> Oceanville >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Maine

The Commemorative Quarter for Maine





Nearest Communities to Oceanville,
Listed County-By-County

The purpose of this page is to identify those communities that are closest to Oceanville, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Oceanville:

We have great-grandparents who lived in a small community in the southwest corner of their home county. During their lives, most hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.

Please note that when we give a distance, it's a 'straight-line' distance.<1>

If you're researching your genealogy, we hope that the following information helps.

Oceanville is located in Hancock County.

The following 3 counties adjoin and form the boundaries of Hancock County: Penobscot, Waldo & Washington.

Our Gazetteer shows that there are 222 communities within 40 miles [64.4 km]<1> of Oceanville. Of these communities, 97 are located in counties other than Hancock County.

We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.

After starting with the home county for Oceanville (which is Hancock County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Oceanville

For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.

  • Hancock County   (where Oceanville resides)
    • Given the large number of communities that are located in Hancock County, we have limited the list to those within 28 miles [45.1 km]<1> of Oceanville (about 100 communities).
    • County Website:   www.co.hancock.me.us/
    • County Seat for Hancock:   Ellsworth
    • Note: The Atlantic Ocean lies to the south
    • Genealogy Websites   ...
    • Nearest Communities to Oceanville   ...
      • These communities are listed by their distance from Oceanville.
      • Mountainville
        (Less than 2 miles to the north)
        • Jump to our Gazetteer entry for Mountainville
        • Mountainville is located in Hancock County
      • Sunshine
        (2 miles [3.2 km] to the east)
        • Note: The GPS coordinates that we are using for Sunshine have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sunshine
        • Sunshine is located in Hancock County
      • South Deer Isle
        (2 miles [3.2 km] to the west)
        • Note: The GPS coordinates that we are using for South Deer Isle have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for South Deer Isle
        • South Deer Isle is located in Hancock County
      • Deer Isle
        (3 miles [4.8 km] to the northwest)
        • Note: The GPS coordinates that we are using for Deer Isle have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Deer Isle
        • Deer Isle is located in Hancock County
        • Population from the 2020 Census: 1,911 people
        • Jump to TripAdvisor's Tourism page for Deer Isle <4>
      • Stonington
        (3 miles [4.8 km] to the southwest)
        • Note: The GPS coordinates that we are using for Stonington have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Stonington
        • Stonington is located in Hancock County
        • Population from the 2020 Census: 1,033 people
        • Jump to TripAdvisor's Tourism page for Stonington <4>
      • West Deer Isle
        (3 miles [4.8 km] to the west)
        • Note: The GPS coordinates that we are using for West Deer Isle have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for West Deer Isle
        • West Deer Isle is located in Hancock County
      • West Stonington
        (3 miles [4.8 km] to the west)
        • Note: The GPS coordinates that we are using for West Stonington have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for West Stonington
        • West Stonington is located in Hancock County
      • Reach
        (4 miles [6.4 km] to the north)
        • Note: The GPS coordinates that we are using for Reach have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Reach
        • Reach is located in Hancock County
      • Sunset
        (4 miles [6.4 km] to the west)
        • Note: The GPS coordinates that we are using for Sunset have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sunset
        • Sunset is located in Hancock County
        • Jump to TripAdvisor's Tourism page for Sunset <4>
      • Haven
        (5 miles [8 km] to the north)
        • Note: The GPS coordinates that we are using for Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Haven
        • Haven is located in Hancock County
      • Naskeag
        (5 miles [8 km] to the northeast)
        • Note: The GPS coordinates that we are using for Naskeag have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Naskeag
        • Naskeag is located in Hancock County
      • Brooklin
        (6 miles [9.7 km] to the northeast)
      • Continue List   (113 more) ...
        • North Deer Isle
          (6 miles [9.7 km] to the northwest)
          • Note: The GPS coordinates that we are using for North Deer Isle have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Deer Isle
          • North Deer Isle is located in Hancock County
        • West Brooklin
          (7 miles [11.3 km] to the north)
          • Note: The GPS coordinates that we are using for West Brooklin have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Brooklin
          • West Brooklin is located in Hancock County
        • Little Deer Isle
          (7 miles [11.3 km] to the northwest)
        • Swans Island
          (8 miles [12.9 km] to the east)
          • Note: The GPS coordinates that we are using for Swans Island have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Swans Island
          • Swans Island is located in Hancock County
          • Population from the 2020 Census: 323 people
          • Jump to TripAdvisor's Tourism page for Swans Island <4>
        • North Brooklin
          (8 miles [12.9 km] to the north)
          • Note: The GPS coordinates that we are using for North Brooklin have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Brooklin
          • North Brooklin is located in Hancock County
        • Sargentville
          (8 miles [12.9 km] to the north)
          • Note: The GPS coordinates that we are using for Sargentville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Sargentville
          • Sargentville is located in Hancock County
        • Sedgwick
          (8 miles [12.9 km] to the north)
          • Note: The GPS coordinates that we are using for Sedgwick have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Sedgwick
          • Sedgwick is located in Hancock County
          • Population from the 2020 Census: 1,175 people
          • Jump to TripAdvisor's Tourism page for Sedgwick <4>
        • Atlantic
          (9 miles [14.5 km] to the east)
          • Note: The GPS coordinates that we are using for Atlantic have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Atlantic
          • Atlantic is located in Hancock County
        • Minturn
          (9 miles [14.5 km] to the east)
          • Jump to our Gazetteer entry for Minturn
          • Minturn is located in Hancock County
        • Eggemoggin
          (9 miles [14.5 km] to the northwest)
          • Note: The GPS coordinates that we are using for Eggemoggin have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Eggemoggin
          • Eggemoggin is located in Hancock County
        • Herricks
          (9 miles [14.5 km] to the northwest)
          • Note: The GPS coordinates that we are using for Herricks have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Herricks
          • Herricks is located in Hancock County
        • North Sedgwick
          (10 miles [16.1 km] to the north)
          • Note: The GPS coordinates that we are using for North Sedgwick have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Sedgwick
          • North Sedgwick is located in Hancock County
        • Norumbega
          (10 miles [16.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Norumbega have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Norumbega
          • Norumbega is located in Hancock County
        • Black Corner
          (11 miles [17.7 km] to the north)
          • Note: The GPS coordinates that we are using for Black Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Black Corner
          • Black Corner is located in Hancock County
        • Brooksville
          (11 miles [17.7 km] to the north)
          • Note: The GPS coordinates that we are using for Brooksville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Brooksville
          • Brooksville is located in Hancock County
          • Population from the 2020 Census: 910 people
          • Jump to TripAdvisor's Tourism page for Brooksville <4>
        • Richtown
          (12 miles [19.3 km] to the east)
          • Note: The GPS coordinates that we are using for Richtown have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Richtown
          • Richtown is located in Hancock County
        • South Blue Hill
          (12 miles [19.3 km] to the north)
          • Note: The GPS coordinates that we are using for South Blue Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Blue Hill
          • South Blue Hill is located in Hancock County
        • West Tremont
          (12 miles [19.3 km] to the northeast)
          • Note: The GPS coordinates that we are using for West Tremont have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Tremont
          • West Tremont is located in Hancock County
          • Jump to TripAdvisor's Tourism page for West Tremont <4>
        • South Brooksville
          (12 miles [19.3 km] to the northwest)
          • Note: The GPS coordinates that we are using for South Brooksville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Brooksville
          • South Brooksville is located in Hancock County
        • Baldwin Corners
          (13 miles [20.9 km] to the east)
          • Note: The GPS coordinates that we are using for Baldwin Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Baldwin Corners
          • Baldwin Corners is located in Hancock County
        • Bernard
          (13 miles [20.9 km] to the east)
        • Frenchboro
          (13 miles [20.9 km] to the east)
          • Note: The GPS coordinates that we are using for Frenchboro have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Frenchboro
          • Frenchboro is located in Hancock County
          • Population from the 2020 Census: 59 people
          • Jump to TripAdvisor's Tourism page for Frenchboro <4>
        • Blue Hill Falls
          (13 miles [20.9 km] to the north)
          • Note: The GPS coordinates that we are using for Blue Hill Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Blue Hill Falls
          • Blue Hill Falls is located in Hancock County
        • Grays Corner
          (13 miles [20.9 km] to the north)
          • Note: The GPS coordinates that we are using for Grays Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Grays Corner
          • Grays Corner is located in Hancock County
        • Seal Cove
          (13 miles [20.9 km] to the northeast)
          • Note: The GPS coordinates that we are using for Seal Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Seal Cove
          • Seal Cove is located in Hancock County
          • Jump to TripAdvisor's Tourism page for Seal Cove <4>
        • Cape Rosier
          (13 miles [20.9 km] to the northwest)
          • Jump to our Gazetteer entry for Cape Rosier
          • Cape Rosier is located in Hancock County
        • Flat Landing
          (13 miles [20.9 km] to the northwest)
          • Note: The GPS coordinates that we are using for Flat Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Flat Landing
          • Flat Landing is located in Hancock County
        • Bass Harbor
          (14 miles [22.5 km] to the east)
          • Note: The GPS coordinates that we are using for Bass Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bass Harbor
          • Bass Harbor is located in Hancock County
          • Jump to TripAdvisor's Tourism page for Bass Harbor <4>
        • Tremont
          (14 miles [22.5 km] to the east)
          • Note: The GPS coordinates that we are using for Tremont have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Tremont
          • Tremont is located in Hancock County
          • Population from the 2020 Census: 1,602 people
        • Oak Hill
          (14 miles [22.5 km] to the north)
          • Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Oak Hill
          • Oak Hill is located in Hancock County
        • Goose Falls
          (14 miles [22.5 km] to the northwest)
          • Note: The GPS coordinates that we are using for Goose Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Goose Falls
          • Goose Falls is located in Hancock County
        • Harborside
          (14 miles [22.5 km] to the northwest)
          • Note: The GPS coordinates that we are using for Harborside have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Harborside
          • Harborside is located in Hancock County
          • Jump to TripAdvisor's Tourism page for Harborside <4>
        • Wonderland
          (15 miles [24.1 km] to the east)
          • Note: The GPS coordinates that we are using for Wonderland have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Wonderland
          • Wonderland is located in Hancock County
        • Blue Hill
          (15 miles [24.1 km] to the north)
        • North Brooksville
          (15 miles [24.1 km] to the north)
          • Note: The GPS coordinates that we are using for North Brooksville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Brooksville
          • North Brooksville is located in Hancock County
        • Pretty Marsh
          (15 miles [24.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for Pretty Marsh have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Pretty Marsh
          • Pretty Marsh is located in Hancock County
        • Manset
          (16 miles [25.7 km] to the east)
          • Note: The GPS coordinates that we are using for Manset have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Manset
          • Manset is located in Hancock County
        • Seawall
          (16 miles [25.7 km] to the east)
          • Note: The GPS coordinates that we are using for Seawall have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Seawall
          • Seawall is located in Hancock County
        • East Blue Hill
          (16 miles [25.7 km] to the north)
          • Note: The GPS coordinates that we are using for East Blue Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Blue Hill
          • East Blue Hill is located in Hancock County
          • Jump to TripAdvisor's Tourism page for East Blue Hill <4>
        • Stover Corner
          (16 miles [25.7 km] to the north)
          • Note: The GPS coordinates that we are using for Stover Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Stover Corner
          • Stover Corner is located in Hancock County
        • Southwest Harbor
          (16 miles [25.7 km] to the northeast)
          • Note: The GPS coordinates that we are using for Southwest Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Southwest Harbor
          • Southwest Harbor is located in Hancock County
          • Population from the 2020 Census: 1,793 people
          • Jump to TripAdvisor's Tourism page for Southwest Harbor <4>
        • Castine
          (16 miles [25.7 km] to the northwest)
        • Fort George
          (16 miles [25.7 km] to the northwest)
          • Note: The GPS coordinates that we are using for Fort George have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Fort George
          • Fort George is located in Hancock County
        • Penobscot
          (16 miles [25.7 km] to the northwest)
          • Note: The GPS coordinates that we are using for Penobscot have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Penobscot
          • Penobscot is located in Hancock County
          • Population from the 2020 Census: 1,220 people
          • Jump to TripAdvisor's Tourism page for Penobscot <4>
        • West Brooksville
          (16 miles [25.7 km] to the northwest)
          • Note: The GPS coordinates that we are using for West Brooksville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Brooksville
          • West Brooksville is located in Hancock County
        • Mount Desert
          (17 miles [27.4 km] to the northeast)
          • Note: The GPS coordinates that we are using for Mount Desert have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Mount Desert
          • Mount Desert is located in Hancock County
          • Population from the 2020 Census: 2,114 people
          • Jump to TripAdvisor's Tourism page for Mount Desert <4>
        • South Surry
          (17 miles [27.4 km] to the northeast)
          • Note: The GPS coordinates that we are using for South Surry have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Surry
          • South Surry is located in Hancock County
        • North Castine
          (17 miles [27.4 km] to the northwest)
          • Note: The GPS coordinates that we are using for North Castine have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Castine
          • North Castine is located in Hancock County
        • South Penobscot
          (18 miles [29 km] to the north)
          • Note: The GPS coordinates that we are using for South Penobscot have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Penobscot
          • South Penobscot is located in Hancock County
        • Asticou
          (18 miles [29 km] to the northeast)
          • Note: The GPS coordinates that we are using for Asticou have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Asticou
          • Asticou is located in Hancock County
        • Hall Quarry
          (18 miles [29 km] to the northeast)
          • Note: The GPS coordinates that we are using for Hall Quarry have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hall Quarry
          • Hall Quarry is located in Hancock County
        • Indian Point
          (18 miles [29 km] to the northeast)
          • Note: The GPS coordinates that we are using for Indian Point have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Indian Point
          • Indian Point is located in Hancock County
        • Northeast Harbor
          (18 miles [29 km] to the northeast)
        • Somesville
          (18 miles [29 km] to the northeast)
          • Note: The GPS coordinates that we are using for Somesville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Somesville
          • Somesville is located in Hancock County
        • West Castine
          (18 miles [29 km] to the northwest)
          • Note: The GPS coordinates that we are using for West Castine have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Castine
          • West Castine is located in Hancock County
        • Cranberry Isles
          (19 miles [30.6 km] to the east)
          • Jump to our Gazetteer entry for Cranberry Isles
          • Cranberry Isles is located in Hancock County
          • Population from the 2020 Census: 138 people
        • Islesford
          (19 miles [30.6 km] to the east)
          • Note: The GPS coordinates that we are using for Islesford have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Islesford
          • Islesford is located in Hancock County
        • Richs Corner
          (20 miles [32.2 km] to the north)
          • Note: The GPS coordinates that we are using for Richs Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Richs Corner
          • Richs Corner is located in Hancock County
        • Red Rock Corner
          (20 miles [32.2 km] to the northeast)
          • Note: The GPS coordinates that we are using for Red Rock Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Red Rock Corner
          • Red Rock Corner is located in Hancock County
        • Seal Harbor
          (20 miles [32.2 km] to the northeast)
          • Note: The GPS coordinates that we are using for Seal Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Seal Harbor
          • Seal Harbor is located in Hancock County
          • Jump to TripAdvisor's Tourism page for Seal Harbor <4>
        • Town Hill
          (20 miles [32.2 km] to the northeast)
          • Note: The GPS coordinates that we are using for Town Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Town Hill
          • Town Hill is located in Hancock County
        • West Trenton
          (20 miles [32.2 km] to the northeast)
          • Jump to our Gazetteer entry for West Trenton
          • West Trenton is located in Hancock County
        • Marks Corner
          (21 miles [33.8 km] to the north)
          • Note: The GPS coordinates that we are using for Marks Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Marks Corner
          • Marks Corner is located in Hancock County
        • West Penobscot
          (21 miles [33.8 km] to the north)
          • Jump to our Gazetteer entry for West Penobscot
          • West Penobscot is located in Hancock County
        • Bayside
          (21 miles [33.8 km] to the northeast)
          • Note: The GPS coordinates that we are using for Bayside have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bayside
          • Bayside is located in Hancock County
        • Trenton
          (21 miles [33.8 km] to the northeast)
          • Note: The GPS coordinates that we are using for Trenton have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Trenton
          • Trenton is located in Hancock County
          • Population from the 2020 Census: 1,568 people
          • Jump to TripAdvisor's Tourism page for Trenton <4>
        • Surry
          (22 miles [35.4 km] to the north)
          • Note: The GPS coordinates that we are using for Surry have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Surry
          • Surry is located in Hancock County
          • Population from the 2020 Census: 1,504 people
          • Jump to TripAdvisor's Tourism page for Surry <4>
        • West Surry
          (22 miles [35.4 km] to the north)
          • Note: The GPS coordinates that we are using for West Surry have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Surry
          • West Surry is located in Hancock County
        • Eden
          (22 miles [35.4 km] to the northeast)
          • Note: The GPS coordinates that we are using for Eden have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Eden
          • Eden is located in Hancock County
        • Otter Creek
          (22 miles [35.4 km] to the northeast)
        • East Surry
          (23 miles [37 km] to the north)
          • Note: The GPS coordinates that we are using for East Surry have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Surry
          • East Surry is located in Hancock County
        • North Penobscot
          (23 miles [37 km] to the north)
          • Jump to our Gazetteer entry for North Penobscot
          • North Penobscot is located in Hancock County
        • South Orland
          (23 miles [37 km] to the north)
          • Note: The GPS coordinates that we are using for South Orland have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Orland
          • South Orland is located in Hancock County
        • Salsbury Cove
          (23 miles [37 km] to the northeast)
          • Note: The GPS coordinates that we are using for Salsbury Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Salsbury Cove
          • Salsbury Cove is located in Hancock County
        • Bar Harbor
          (24 miles [38.6 km] to the northeast)
        • East Lamoine
          (24 miles [38.6 km] to the northeast)
          • Note: The GPS coordinates that we are using for East Lamoine have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Lamoine
          • East Lamoine is located in Hancock County
        • Hulls Cove
          (24 miles [38.6 km] to the northeast)
        • Lamoine Beach
          (24 miles [38.6 km] to the northeast)
          • Note: The GPS coordinates that we are using for Lamoine Beach have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Lamoine Beach
          • Lamoine Beach is located in Hancock County
        • Lamoine Corner
          (24 miles [38.6 km] to the northeast)
          • Note: The GPS coordinates that we are using for Lamoine Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Lamoine Corner
          • Lamoine Corner is located in Hancock County
        • Cranes Corners
          (25 miles [40.2 km] to the north)
          • Note: The GPS coordinates that we are using for Cranes Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Cranes Corners
          • Cranes Corners is located in Hancock County
        • West Ellsworth
          (25 miles [40.2 km] to the north)
          • Note: The GPS coordinates that we are using for West Ellsworth have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Ellsworth
          • West Ellsworth is located in Hancock County
        • North Lamoine
          (25 miles [40.2 km] to the northeast)
          • Note: The GPS coordinates that we are using for North Lamoine have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Lamoine
          • North Lamoine is located in Hancock County
        • East Orland
          (26 miles [41.8 km] to the north)
          • Note: The GPS coordinates that we are using for East Orland have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Orland
          • East Orland is located in Hancock County
          • Jump to TripAdvisor's Tourism page for East Orland <4>
        • Ellsworth
          (26 miles [41.8 km] to the north)
        • Five Mile Corners
          (26 miles [41.8 km] to the north)
          • Note: The GPS coordinates that we are using for Five Mile Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Five Mile Corners
          • Five Mile Corners is located in Hancock County
        • Joyville
          (26 miles [41.8 km] to the north)
          • Note: The GPS coordinates that we are using for Joyville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Joyville
          • Joyville is located in Hancock County
        • Verona Park
          (26 miles [41.8 km] to the north)
          • Note: The GPS coordinates that we are using for Verona Park have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Verona Park
          • Verona Park is located in Hancock County
        • Lamoine
          (26 miles [41.8 km] to the northeast)
        • Marlboro
          (26 miles [41.8 km] to the northeast)
          • Note: The GPS coordinates that we are using for Marlboro have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Marlboro
          • Marlboro is located in Hancock County
        • Ellsworth Falls
          (27 miles [43.5 km] to the north)
          • Note: The GPS coordinates that we are using for Ellsworth Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Ellsworth Falls
          • Ellsworth Falls is located in Hancock County
        • Orland
          (27 miles [43.5 km] to the north)
          • Note: The GPS coordinates that we are using for Orland have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Orland
          • Orland is located in Hancock County
          • Population from the 2020 Census: 2,173 people
          • Jump to TripAdvisor's Tourism page for Orland <4>
        • Verona Island
          (27 miles [43.5 km] to the north)
          • Jump to our Gazetteer entry for Verona Island
          • Verona Island is located in Hancock County
          • Population from the 2020 Census: 555 people
          • Former name for Verona Island:
          • Verona
        • Hancock Point
          (27 miles [43.5 km] to the northeast)
          • Note: The GPS coordinates that we are using for Hancock Point have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hancock Point
          • Hancock Point is located in Hancock County
        • Bucksport
          (28 miles [45.1 km] to the north)
          • Note: The GPS coordinates that we are using for Bucksport have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bucksport
          • Bucksport is located in Hancock County
          • Population from the 2020 Census: 4,916 people
          • Jump to TripAdvisor's Tourism page for Bucksport <4>
        • Sand Beach
          (28 miles [45.1 km] to the north)
          • Note: The GPS coordinates that we are using for Sand Beach have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Sand Beach
          • Sand Beach is located in Hancock County
        • Franklin Road
          (28 miles [45.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for Franklin Road have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Franklin Road
          • Franklin Road is located in Hancock County
        • South Hancock
          (28 miles [45.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for South Hancock have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Hancock
          • South Hancock is located in Hancock County
        • Washington Junction
          (28 miles [45.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for Washington Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Washington Junction
          • Washington Junction is located in Hancock County
  • Knox County
    • County Website:   www.knoxcounty.midcoast.com/
    • County Seat for Knox:   Rockland
    • Genealogy Websites   ...
    • Nearest Communities to Oceanville   ...
      • These communities are listed by their distance from Oceanville.
      • Isle Au Haut
        (7 miles [11.3 km] to the south)
        • Note: The GPS coordinates that we are using for Isle Au Haut have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Isle Au Haut
        • Isle Au Haut is located in Knox County
        • Population from the 2020 Census: 65 people
        • Jump to TripAdvisor's Tourism page for Isle Au Haut <4>
      • Goose Rocks
        (10 miles [16.1 km] to the west)
        • Note: The GPS coordinates that we are using for Goose Rocks have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Goose Rocks
        • Goose Rocks is located in Knox County
      • North Haven
        (13 miles [20.9 km] to the west)
        • Note: The GPS coordinates that we are using for North Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for North Haven
        • North Haven is located in Knox County
        • Population from the 2020 Census: 358 people
        • Jump to TripAdvisor's Tourism page for North Haven <4>
      • Pulpit Harbor
        (13 miles [20.9 km] to the west)
        • Jump to our Gazetteer entry for Pulpit Harbor
        • Pulpit Harbor is located in Knox County
      • Vinalhaven
        (14 miles [22.5 km] to the southwest)
      • Camden
        (21 miles [33.8 km] to the west)
        • Note: The GPS coordinates that we are using for Camden have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Camden
        • Camden is located in Knox County
        • Population from the 2020 Census: 4,806 people
        • Jump to TripAdvisor's Tourism page for Camden <4>
      • Holiday Beach
        (22 miles [35.4 km] to the west)
        • Note: The GPS coordinates that we are using for Holiday Beach have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Holiday Beach
        • Holiday Beach is located in Knox County
      • Owls Head
        (22 miles [35.4 km] to the west)
      • Rockport
        (22 miles [35.4 km] to the west)
        • Note: The GPS coordinates that we are using for Rockport have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Rockport
        • Rockport is located in Knox County
        • Population from the 2020 Census: 3,389 people
        • Jump to TripAdvisor's Tourism page for Rockport <4>
      • Crescent Beach
        (23 miles [37 km] to the west)
        • Note: The GPS coordinates that we are using for Crescent Beach have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Crescent Beach
        • Crescent Beach is located in Knox County
      • Glen Cove
        (23 miles [37 km] to the west)
        • Note: The GPS coordinates that we are using for Glen Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Glen Cove
        • Glen Cove is located in Knox County
      • Lake City
        (23 miles [37 km] to the west)
        • Note: The GPS coordinates that we are using for Lake City have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lake City
        • Lake City is located in Knox County
      • Continue List   (30 more) ...
        • Melvin Heights
          (23 miles [37 km] to the west)
          • Note: The GPS coordinates that we are using for Melvin Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Melvin Heights
          • Melvin Heights is located in Knox County
        • Simonton Corners
          (23 miles [37 km] to the west)
          • Note: The GPS coordinates that we are using for Simonton Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Simonton Corners
          • Simonton Corners is located in Knox County
        • Matinicus Isle Plantation
          (24 miles [38.6 km] to the southwest)
          • Note: The GPS coordinates that we are using for Matinicus Isle Plantation have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Matinicus Isle Plantation
          • Matinicus Isle Plantation is located in Knox County
          • Population from the 2020 Census: 72 people
        • Ash Point
          (24 miles [38.6 km] to the west)
          • Note: The GPS coordinates that we are using for Ash Point have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Ash Point
          • Ash Point is located in Knox County
        • Blackinton Corners
          (24 miles [38.6 km] to the west)
          • Note: The GPS coordinates that we are using for Blackinton Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Blackinton Corners
          • Blackinton Corners is located in Knox County
        • Rockland
          (24 miles [38.6 km] to the west)
        • Rockville
          (24 miles [38.6 km] to the west)
          • Note: The GPS coordinates that we are using for Rockville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Rockville
          • Rockville is located in Knox County
        • Matinicus
          (25 miles [40.2 km] to the southwest)
        • Grants Turn
          (25 miles [40.2 km] to the west)
          • Note: The GPS coordinates that we are using for Grants Turn have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Grants Turn
          • Grants Turn is located in Knox County
        • West Rockport
          (25 miles [40.2 km] to the west)
          • Note: The GPS coordinates that we are using for West Rockport have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Rockport
          • West Rockport is located in Knox County
          • Jump to TripAdvisor's Tourism page for West Rockport <4>
        • Payson Corner
          (26 miles [41.8 km] to the west)
          • Note: The GPS coordinates that we are using for Payson Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Payson Corner
          • Payson Corner is located in Knox County
        • South Thomaston
          (26 miles [41.8 km] to the west)
          • Note: The GPS coordinates that we are using for South Thomaston have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Thomaston
          • South Thomaston is located in Knox County
          • Population from the 2020 Census: 1,642 people
          • Jump to TripAdvisor's Tourism page for South Thomaston <4>
        • Criehaven
          (27 miles [43.5 km] to the southwest)
          • Jump to our Gazetteer entry for Criehaven
          • Criehaven is located in Knox County
          • Estimated population in 2015: 1 people
        • Athearns Corner
          (27 miles [43.5 km] to the west)
          • Note: The GPS coordinates that we are using for Athearns Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Athearns Corner
          • Athearns Corner is located in Knox County
        • Hope
          (27 miles [43.5 km] to the west)
        • Montpelier
          (27 miles [43.5 km] to the west)
          • Note: The GPS coordinates that we are using for Montpelier have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Montpelier
          • Montpelier is located in Knox County
        • Willis Corners
          (27 miles [43.5 km] to the west)
          • Note: The GPS coordinates that we are using for Willis Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Willis Corners
          • Willis Corners is located in Knox County
        • Spruce Head
          (28 miles [45.1 km] to the southwest)
          • Note: The GPS coordinates that we are using for Spruce Head have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Spruce Head
          • Spruce Head is located in Knox County
          • Jump to TripAdvisor's Tourism page for Spruce Head <4>
        • East Warren
          (28 miles [45.1 km] to the west)
          • Note: The GPS coordinates that we are using for East Warren have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Warren
          • East Warren is located in Knox County
        • North Hope Corner
          (28 miles [45.1 km] to the west)
          • Note: The GPS coordinates that we are using for North Hope Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Hope Corner
          • North Hope Corner is located in Knox County
        • South Hope
          (28 miles [45.1 km] to the west)
          • Note: The GPS coordinates that we are using for South Hope have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Hope
          • South Hope is located in Knox County
        • Thomaston
          (28 miles [45.1 km] to the west)
        • East Union
          (29 miles [46.7 km] to the west)
          • Note: The GPS coordinates that we are using for East Union have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Union
          • East Union is located in Knox County
        • Clark Island
          (30 miles [48.3 km] to the southwest)
          • Note: The GPS coordinates that we are using for Clark Island have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Clark Island
          • Clark Island is located in Knox County
        • Saint George
          (30 miles [48.3 km] to the southwest)
          • Note: The GPS coordinates that we are using for Saint George have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Saint George
          • Saint George is located in Knox County
          • Population from the 2020 Census: 2,578 people
        • North Appleton
          (30 miles [48.3 km] to the west)
          • Note: The GPS coordinates that we are using for North Appleton have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Appleton
          • North Appleton is located in Knox County
        • North Cushing
          (30 miles [48.3 km] to the west)
          • Note: The GPS coordinates that we are using for North Cushing have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Cushing
          • North Cushing is located in Knox County
        • Shermans Mill
          (30 miles [48.3 km] to the west)
          • Note: The GPS coordinates that we are using for Shermans Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Shermans Mill
          • Shermans Mill is located in Knox County
        • South Warren
          (30 miles [48.3 km] to the west)
          • Note: The GPS coordinates that we are using for South Warren have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Warren
          • South Warren is located in Knox County
        • Wattons Mill
          (30 miles [48.3 km] to the west)
          • Note: The GPS coordinates that we are using for Wattons Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Wattons Mill
          • Wattons Mill is located in Knox County
  • Waldo County
    • County Seat for Waldo:   Belfast
    • Genealogy Websites   ...
    • Nearest Communities to Oceanville   ...
      • These communities are listed by their distance from Oceanville.
      • Dark Harbor
        (15 miles [24.1 km] to the west)
        • Note: The GPS coordinates that we are using for Dark Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Dark Harbor
        • Dark Harbor is located in Waldo County
      • Islesboro
        (16 miles [25.7 km] to the northwest)
        • Note: The GPS coordinates that we are using for Islesboro have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Islesboro
        • Islesboro is located in Waldo County
        • Population from the 2020 Census: 562 people
      • North Islesboro
        (17 miles [27.4 km] to the northwest)
        • Jump to our Gazetteer entry for North Islesboro
        • North Islesboro is located in Waldo County
      • Pripet
        (17 miles [27.4 km] to the northwest)
        • Note: The GPS coordinates that we are using for Pripet have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Pripet
        • Pripet is located in Waldo County
      • Crows Nest
        (18 miles [29 km] to the northwest)
        • Note: The GPS coordinates that we are using for Crows Nest have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Crows Nest
        • Crows Nest is located in Waldo County
      • Northport
        (19 miles [30.6 km] to the northwest)
        • Note: The GPS coordinates that we are using for Northport have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Northport
        • Northport is located in Waldo County
        • Population from the 2020 Census: 1,593 people
        • Jump to TripAdvisor's Tourism page for Northport <4>
      • Temple Heights
        (19 miles [30.6 km] to the northwest)
        • Note: The GPS coordinates that we are using for Temple Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Temple Heights
        • Temple Heights is located in Waldo County
      • Ducktrap
        (20 miles [32.2 km] to the west)
        • Note: The GPS coordinates that we are using for Ducktrap have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Ducktrap
        • Ducktrap is located in Waldo County
      • Lincolnville
        (20 miles [32.2 km] to the west)
        • Note: The GPS coordinates that we are using for Lincolnville have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lincolnville
        • Lincolnville is located in Waldo County
        • Population from the 2020 Census: 2,252 people
        • Jump to TripAdvisor's Tourism page for Lincolnville <4>
      • Bayside
        (21 miles [33.8 km] to the northwest)
        • Note: The GPS coordinates that we are using for Bayside have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Bayside
        • Bayside is located in Waldo County
      • Carvers Corner
        (21 miles [33.8 km] to the west)
        • Note: The GPS coordinates that we are using for Carvers Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Carvers Corner
        • Carvers Corner is located in Waldo County
      • Stevens Corner
        (21 miles [33.8 km] to the west)
        • Note: The GPS coordinates that we are using for Stevens Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Stevens Corner
        • Stevens Corner is located in Waldo County
      • Continue List   (43 more) ...
        • East Northport
          (22 miles [35.4 km] to the northwest)
          • Note: The GPS coordinates that we are using for East Northport have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Northport
          • East Northport is located in Waldo County
        • Herricks Corner
          (22 miles [35.4 km] to the northwest)
          • Note: The GPS coordinates that we are using for Herricks Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Herricks Corner
          • Herricks Corner is located in Waldo County
        • Grange Corner
          (23 miles [37 km] to the northwest)
          • Note: The GPS coordinates that we are using for Grange Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Grange Corner
          • Grange Corner is located in Waldo County
        • Greenlaws Corner
          (23 miles [37 km] to the northwest)
          • Note: The GPS coordinates that we are using for Greenlaws Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Greenlaws Corner
          • Greenlaws Corner is located in Waldo County
        • Stockton Springs
          (23 miles [37 km] to the northwest)
          • Note: The GPS coordinates that we are using for Stockton Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Stockton Springs
          • Stockton Springs is located in Waldo County
          • Population from the 2020 Census: 1,640 people
          • Jump to TripAdvisor's Tourism page for Stockton Springs <4>
        • Heals Corner
          (24 miles [38.6 km] to the northwest)
          • Note: The GPS coordinates that we are using for Heals Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Heals Corner
          • Heals Corner is located in Waldo County
        • Hurds Corner
          (24 miles [38.6 km] to the northwest)
          • Note: The GPS coordinates that we are using for Hurds Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hurds Corner
          • Hurds Corner is located in Waldo County
        • Sandy Point
          (24 miles [38.6 km] to the northwest)
          • Note: The GPS coordinates that we are using for Sandy Point have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Sandy Point
          • Sandy Point is located in Waldo County
          • Jump to TripAdvisor's Tourism page for Sandy Point <4>
        • Searsport
          (24 miles [38.6 km] to the northwest)
        • Drake Corner
          (24 miles [38.6 km] to the west)
          • Note: The GPS coordinates that we are using for Drake Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Drake Corner
          • Drake Corner is located in Waldo County
        • Townhouse Corner
          (24 miles [38.6 km] to the west)
          • Note: The GPS coordinates that we are using for Townhouse Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Townhouse Corner
          • Townhouse Corner is located in Waldo County
        • Youngtown
          (24 miles [38.6 km] to the west)
          • Note: The GPS coordinates that we are using for Youngtown have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Youngtown
          • Youngtown is located in Waldo County
        • Belfast
          (25 miles [40.2 km] to the northwest)
        • Dog Island Corner
          (25 miles [40.2 km] to the northwest)
          • Note: The GPS coordinates that we are using for Dog Island Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Dog Island Corner
          • Dog Island Corner is located in Waldo County
        • Lincolnville Center
          (25 miles [40.2 km] to the west)
        • Bryants Corner
          (26 miles [41.8 km] to the northwest)
          • Jump to our Gazetteer entry for Bryants Corner
          • Bryants Corner is located in Waldo County
        • Halls Corner
          (26 miles [41.8 km] to the northwest)
          • Note: The GPS coordinates that we are using for Halls Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Halls Corner
          • Halls Corner is located in Waldo County
        • Simpsons Corner
          (26 miles [41.8 km] to the northwest)
          • Note: The GPS coordinates that we are using for Simpsons Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Simpsons Corner
          • Simpsons Corner is located in Waldo County
        • Prospect Ferry
          (27 miles [43.5 km] to the north)
          • Jump to our Gazetteer entry for Prospect Ferry
          • Prospect Ferry is located in Waldo County
        • Belmont
          (27 miles [43.5 km] to the northwest)
          • Note: The GPS coordinates that we are using for Belmont have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Belmont
          • Belmont is located in Waldo County
          • Population from the 2020 Census: 911 people
        • Center Belmont
          (27 miles [43.5 km] to the northwest)
          • Note: The GPS coordinates that we are using for Center Belmont have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Center Belmont
          • Center Belmont is located in Waldo County
        • City Point
          (27 miles [43.5 km] to the northwest)
          • Note: The GPS coordinates that we are using for City Point have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for City Point
          • City Point is located in Waldo County
        • Hayford Corner
          (27 miles [43.5 km] to the northwest)
          • Note: The GPS coordinates that we are using for Hayford Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hayford Corner
          • Hayford Corner is located in Waldo County
        • Head-of-the-Tide
          (27 miles [43.5 km] to the northwest)
          • Note: The GPS coordinates that we are using for Head-of-the-Tide have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Head-of-the-Tide
          • Head-of-the-Tide is located in Waldo County
        • Bickfords Corner
          (28 miles [45.1 km] to the northwest)
          • Jump to our Gazetteer entry for Bickfords Corner
          • Bickfords Corner is located in Waldo County
        • Brown Corner
          (28 miles [45.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Brown Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Brown Corner
          • Brown Corner is located in Waldo County
        • Butlers Corner
          (28 miles [45.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Butlers Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Butlers Corner
          • Butlers Corner is located in Waldo County
        • Greers Corner
          (28 miles [45.1 km] to the northwest)
          • Jump to our Gazetteer entry for Greers Corner
          • Greers Corner is located in Waldo County
        • Holmes Mill
          (28 miles [45.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Holmes Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Holmes Mill
          • Holmes Mill is located in Waldo County
        • Poors Mill
          (28 miles [45.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Poors Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Poors Mill
          • Poors Mill is located in Waldo County
        • Prospect
          (28 miles [45.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Prospect have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Prospect
          • Prospect is located in Waldo County
          • Population from the 2020 Census: 750 people
          • Jump to TripAdvisor's Tourism page for Prospect <4>
        • Vickerys Corner
          (28 miles [45.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Vickerys Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Vickerys Corner
          • Vickerys Corner is located in Waldo County
        • Yorks Corner
          (28 miles [45.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Yorks Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Yorks Corner
          • Yorks Corner is located in Waldo County
        • Belmont Corner
          (29 miles [46.7 km] to the northwest)
          • Jump to our Gazetteer entry for Belmont Corner
          • Belmont Corner is located in Waldo County
        • Kendalls Corner
          (29 miles [46.7 km] to the northwest)
          • Note: The GPS coordinates that we are using for Kendalls Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Kendalls Corner
          • Kendalls Corner is located in Waldo County
        • Swanville
          (29 miles [46.7 km] to the northwest)
          • Note: The GPS coordinates that we are using for Swanville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Swanville
          • Swanville is located in Waldo County
          • Population from the 2020 Census: 1,359 people
          • Jump to TripAdvisor's Tourism page for Swanville <4>
        • Waldo
          (29 miles [46.7 km] to the northwest)
          • Jump to our Gazetteer entry for Waldo
          • Waldo is located in Waldo County
          • Population from the 2020 Census: 872 people
        • Whitcombs Corner
          (29 miles [46.7 km] to the northwest)
          • Note: The GPS coordinates that we are using for Whitcombs Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Whitcombs Corner
          • Whitcombs Corner is located in Waldo County
        • Knights Corner
          (29 miles [46.7 km] to the west)
          • Note: The GPS coordinates that we are using for Knights Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Knights Corner
          • Knights Corner is located in Waldo County
        • North Searsport
          (30 miles [48.3 km] to the northwest)
          • Jump to our Gazetteer entry for North Searsport
          • North Searsport is located in Waldo County
        • Searsmont
          (30 miles [48.3 km] to the northwest)
          • Note: The GPS coordinates that we are using for Searsmont have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Searsmont
          • Searsmont is located in Waldo County
          • Population from the 2020 Census: 1,424 people
          • Jump to TripAdvisor's Tourism page for Searsmont <4>
        • Slab City
          (30 miles [48.3 km] to the northwest)
          • Note: The GPS coordinates that we are using for Slab City have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Slab City
          • Slab City is located in Waldo County
        • Ghent
          (30 miles [48.3 km] to the west)
          • Note: The GPS coordinates that we are using for Ghent have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Ghent
          • Ghent is located in Waldo County

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Oceanville) to Point B.Our distance measurements begin at a specific point in Oceanville. The point we use is located at these GPS coordinates - Latitude: 44.1864, Longitude: -68.6225    
<2>Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.

We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.

Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024