Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Fairview Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Fairview Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Fairview Cemetery. We've listed the following communities based on their distance, with the closest first.

Greensburg
(Less than 2 miles to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Greensburg. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Greensburg
- Greensburg is located in Kiowa County
- Population from the 2020 Census: 779 people
- Jump to TripAdvisor's Tourism page for Greensburg <3>
Brenham ‑ Historic
(4 miles [6.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Brenham. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Brenham
- Brenham is located in Kiowa County
Haviland
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Haviland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haviland
- Haviland is located in Kiowa County
- Population from the 2020 Census: 664 people
- Jump to TripAdvisor's Tourism page for Haviland <3>
Mullinville
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Mullinville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Mullinville
- Mullinville is located in Kiowa County
- Population from the 2020 Census: 237 people
- Jump to TripAdvisor's Tourism page for Mullinville <3>
Williams ‑ Historic
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Williams have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williams
- Williams is located in Edwards County
Wellsford
(14 miles [22.5 km] to the east)
- Jump to our Gazetteer entry for Wellsford
- Wellsford is located in Kiowa County
Fellsburg
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Fellsburg. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Fellsburg
- Fellsburg is located in Edwards County
Centerview
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Centerview
- Centerview is located in Edwards County
Hodges
(15 miles [24.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hodges. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Hodges
- Hodges is located in Edwards County
Belvidere
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Belvidere
- Belvidere is located in Kiowa County
Trousdale ‑ Historic
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Trousdale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trousdale
- Trousdale is located in Edwards County
Bucklin
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Bucklin have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bucklin
- Bucklin is located in Ford County
- Population from the 2020 Census: 754 people
- Jump to TripAdvisor's Tourism page for Bucklin <3>
Wilmore
(19 miles [30.6 km] to the south)
- Jump to our Gazetteer entry for Wilmore
- Wilmore is located in Comanche County
- Population from the 2020 Census: 47 people
Cullison
(20 miles [32.2 km] to the east)
- Jump to our Gazetteer entry for Cullison
- Cullison is located in Pratt County
- Population from the 2020 Census: 100 people
Kinsley
(22 miles [35.4 km] to the north)
- Jump to our Gazetteer entry for Kinsley
- Kinsley is located in Edwards County
- Population from the 2020 Census: 1,330 people
- Jump to TripAdvisor's Tourism page for Kinsley <3>
Ardell
(22 miles [35.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Ardell. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Ardell
- Ardell is located in Edwards County
Lewis
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Lewis have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lewis
- Lewis is located in Edwards County
- Population from the 2020 Census: 407 people
- Jump to TripAdvisor's Tourism page for Lewis <3>
Windhorst
(22 miles [35.4 km] to the northwest)
- Jump to our Gazetteer entry for Windhorst
- Windhorst is located in Ford County
Windthorst
(22 miles [35.4 km] to the northwest)
- Jump to our Gazetteer entry for Windthorst
- Windthorst is located in Ford County
Coldwater
(23 miles [37 km] to the south)
- Jump to our Gazetteer entry for Coldwater
- Coldwater is located in Comanche County
- Population from the 2020 Census: 733 people
- Jump to TripAdvisor's Tourism page for Coldwater <3>
Offerle
(24 miles [38.6 km] to the northwest)
- Jump to our Gazetteer entry for Offerle
- Offerle is located in Edwards County
- Population from the 2020 Census: 180 people
Sun City
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Sun City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sun City
- Sun City is located in Barber County
- Population from the 2020 Census: 47 people
- Jump to TripAdvisor's Tourism page for Sun City <3>
Byers
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Byers have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Byers
- Byers is located in Pratt County
- Population from the 2020 Census: 33 people
Belpre
(25 miles [40.2 km] to the northeast)
- Jump to our Gazetteer entry for Belpre
- Belpre is located in Edwards County
- Population from the 2020 Census: 81 people
Ford
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Ford have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ford
- Ford is located in Ford County
- Population from the 2020 Census: 212 people
- Jump to TripAdvisor's Tourism page for Ford <3>

Off-the-Road Links ...

The official website for State of Kansas: https://portal.kansas.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Fairview Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.6136, Longitude: -99.2868 In this case, the coordinates for the Fairview Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<3>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.