RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Iowa >> Cerro Gordo County >> Ventura >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Iowa

The Commemorative Quarter for Iowa





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Ventura. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Ventura.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Ventura - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 28 communities listed:

  • Aredale
    (30 miles [48.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Aredale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Aredale
    • Aredale is located in Butler County
    • Population from the 2020 Census: 68 people
    • Jump to TripAdvisor's Tourism page for Aredale <3>
  • Belmond
    (20 miles [32.2 km] to the south)
  • Britt
    (17 miles [27.4 km] to the west)
    • Jump to our Gazetteer entry for Britt
    • Britt is located in Hancock County
    • Population from the 2020 Census: 1,928 people
    • Jump to TripAdvisor's Tourism page for Britt <3>
  • Buffalo Center
    (30 miles [48.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Buffalo Center have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Buffalo Center
    • Buffalo Center is located in Winnebago County
    • Population from the 2020 Census: 849 people
    • Jump to TripAdvisor's Tourism page for Buffalo Center <3>
  • Clarion
    (30 miles [48.3 km] to the southwest)
  • Clear Lake
    (4 miles [6.4 km] to the east)
  • Fertile
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Fertile have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fertile
    • Fertile is located in Worth County
    • Population from the 2020 Census: 356 people
    • Jump to TripAdvisor's Tourism page for Fertile <3>
  • Forest City
    (12 miles [19.3 km] to the northwest)
  • Galt
    (30 miles [48.3 km] to the south)
  • Garner
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Garner have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Garner
    • Garner is located in Hancock County
    • Population from the 2020 Census: 3,031 people
    • Jump to TripAdvisor's Tourism page for Garner <3>
  • Grafton
    (24 miles [38.6 km] to the northeast)
    • Note: The GPS coordinates that we are using for Grafton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grafton
    • Grafton is located in Worth County
    • Population from the 2020 Census: 243 people
    • Jump to TripAdvisor's Tourism page for Grafton <3>
  • Hampton
    (29 miles [46.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Hampton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hampton
    • Hampton is located in Franklin County
    • Population from the 2020 Census: 4,162 people
    • Jump to TripAdvisor's Tourism page for Hampton <3>
  • Kanawha
    (21 miles [33.8 km] to the southwest)
  • Kiester
    (30 miles [48.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Kiester have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kiester
    • Kiester is located in Faribault County (MN)
    • Population from the 2020 Census: 456 people
    • Jump to TripAdvisor's Tourism page for Kiester <3>
  • Klemme
    (10 miles [16.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Klemme have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Klemme
    • Klemme is located in Hancock County
    • Population from the 2020 Census: 455 people
    • Jump to TripAdvisor's Tourism page for Klemme <3>
  • Lake Mills
    (20 miles [32.2 km] to the north)
    • Note: The GPS coordinates that we are using for Lake Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Mills
    • Lake Mills is located in Winnebago County
    • Population from the 2020 Census: 1,987 people
    • Jump to TripAdvisor's Tourism page for Lake Mills <3>
  • Latimer
    (25 miles [40.2 km] to the south)
    • Note: The GPS coordinates that we are using for Latimer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Latimer
    • Latimer is located in Franklin County
    • Population from the 2020 Census: 463 people
    • Jump to TripAdvisor's Tourism page for Latimer <3>
  • Manly
    (16 miles [25.7 km] to the northeast)
  • Mason City
    (13 miles [20.9 km] to the east)
  • Nora Springs
    (22 miles [35.4 km] to the east)
    • Note: The GPS coordinates that we are using for Nora Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nora Springs
    • Nora Springs is located in Floyd County
    • Population from the 2020 Census: 1,342 people
    • Jump to TripAdvisor's Tourism page for Nora Springs <3>
  • Northwood
    (25 miles [40.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Northwood have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Northwood
    • Northwood is located in Worth County
    • Population from the 2020 Census: 1,958 people
    • Jump to TripAdvisor's Tourism page for Northwood <3>
  • Rockford
    (26 miles [41.8 km] to the east)
  • Rockwell
    (17 miles [27.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Rockwell have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rockwell
    • Rockwell is located in Cerro Gordo County
    • Population from the 2020 Census: 979 people
    • Jump to TripAdvisor's Tourism page for Rockwell <3>
  • Rowan
    (27 miles [43.5 km] to the south)
  • Rudd
    (28 miles [45.1 km] to the east)
    • Note: The GPS coordinates that we are using for Rudd have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rudd
    • Rudd is located in Floyd County
    • Population from the 2020 Census: 343 people
    • Jump to TripAdvisor's Tourism page for Rudd <3>
  • Scarville
    (24 miles [38.6 km] to the north)
    • Note: The GPS coordinates that we are using for Scarville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Scarville
    • Scarville is located in Winnebago County
    • Population from the 2020 Census: 66 people
    • Jump to TripAdvisor's Tourism page for Scarville <3>
  • Thompson
    (22 miles [35.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Thompson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thompson
    • Thompson is located in Winnebago County
    • Population from the 2020 Census: 466 people
    • Jump to TripAdvisor's Tourism page for Thompson <3>
  • Woden
    (23 miles [37 km] to the west)

Unfortunately, we don't know of an official website for Ventura. If you can help, please contact us through our Feedback Page.

The official website for Cerro Gordo County: www.co.cerro-gordo.ia.us/

The official website for State of Iowa: https://www.iowa.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Ventura) to Point B.Our distance measurements begin at a specific point in Ventura. The point we use is located at these GPS coordinates - Latitude: 43.1283, Longitude: -93.4619       In this case, the coordinates for Ventura have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024