|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Miller Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Miller Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Miller Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Union Point
(4 miles [6.4 km] to the southwest)
- Union Point is also located in Whitfield County
- Jump to our Gazetteer entry for Union Point
- Population from the 2010 Census: 1,845 people
- Chatsworth
(4 miles [6.4 km] to the east)
- Eton
(5 miles [8 km] to the east)
- Ruralvale
(5 miles [8 km] to the north)
- Ruralvale is also located in Whitfield County
- Jump to our Gazetteer entry for Ruralvale
- Dalton
(6 miles [9.7 km] to the west)
- Dalton is also located in Whitfield County
- Jump to our Gazetteer entry for Dalton
- Population from the 2020 Census: 33,368 people
- Jump to TripAdvisor's Tourism page for Dalton <2>
- Sumac
(6 miles [9.7 km] to the northeast)
- Sumac is located in Murray County
- Jump to our Gazetteer entry for Sumac
- Waring
(6 miles [9.7 km] to the west)
- Waring is also located in Whitfield County
- Jump to our Gazetteer entry for Waring
- Crown Mill Village
(7 miles [11.3 km] to the southwest)
- Crown Mill Village is also located in Whitfield County
- Jump to our Gazetteer entry for Crown Mill Village
- Crandall
(7 miles [11.3 km] to the northeast)
- Varnell
(9 miles [14.5 km] to the northwest)
- Rocky Face
(9 miles [14.5 km] to the west)
- Ball Ground
(11 miles [17.7 km] to the southeast)
- Ball Ground is located in Murray County
- Jump to our Gazetteer entry for Ball Ground
- Tunnel Hill
(11 miles [17.7 km] to the west)
- Crow ‑ Historic
(11 miles [17.7 km] to the west)
- Crow was located in Whitfield County
- Jump to our Gazetteer entry for Crow
- Wells ‑ Historic
(12 miles [19.3 km] to the southeast)
- Wells was located in Murray County
- Jump to our Gazetteer entry for Wells
- Cohutta
(12 miles [19.3 km] to the northwest)
- Cisco
(12 miles [19.3 km] to the northeast)
- Trickum
(12 miles [19.3 km] to the west)
- Trickum is also located in Whitfield County
- Jump to our Gazetteer entry for Trickum
- Red Clay
(13 miles [20.9 km] to the north)
- Red Clay is also located in Whitfield County
- Jump to our Gazetteer entry for Red Clay
- Earnest ‑ Historic
(13 miles [20.9 km] to the north)
- Earnest was located in Bradley County (TN)
- Jump to our Gazetteer entry for Earnest
- Catoosa Springs
(13 miles [20.9 km] to the northwest)
- Catoosa Springs is located in Catoosa County
- Jump to our Gazetteer entry for Catoosa Springs
- Tennga
(14 miles [22.5 km] to the northeast)
- Resaca
(15 miles [24.1 km] to the south)
- Tails Creek
(15 miles [24.1 km] to the southeast)
- Tails Creek is located in Gilmer County
- Jump to our Gazetteer entry for Tails Creek
- Population from the 2010 Census: 1,248 people
- Gordon Springs ‑ Historic
(16 miles [25.7 km] to the west)
- Gordon Springs was located in Whitfield County
- Jump to our Gazetteer entry for Gordon Springs
- Villanow
(16 miles [25.7 km] to the southwest)
- Villanow is located in Walker County
- Jump to our Gazetteer entry for Villanow
- Estimated population in 2019: 16,058 people
- Furnace ‑ Historic
(16 miles [25.7 km] to the southwest)
- Furnace was located in Walker County
- Jump to our Gazetteer entry for Furnace
- Hill City
(16 miles [25.7 km] to the southwest)
- Hill City is located in Gordon County
- Jump to our Gazetteer entry for Hill City
- Carters
(16 miles [25.7 km] to the southeast)
- Carters is located in Murray County
- Jump to our Gazetteer entry for Carters
- Howardville
(16 miles [25.7 km] to the northwest)
- Howardville is located in Hamilton County (TN)
- Jump to our Gazetteer entry for Howardville
- Ringgold
(16 miles [25.7 km] to the northwest)
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Miller Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|