|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Millen City Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Millen City Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Millen City Cemetery (FG ID #2136654). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Millen City Cemetery. We've listed the following communities based on their distance, with the closest first.
- Millen
(Less than 2 miles to the west)
- Emmalane
(4 miles [6.4 km] to the southwest)
- Perkins
(7 miles [11.3 km] to the north)
- Scarboro
(7 miles [11.3 km] to the southeast)
- Munnerlyn
(10 miles [16.1 km] to the north)
- Rocky Ford
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Rocky Ford have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rocky Ford
- Rocky Ford is located in Screven County
- Population from the 2020 Census: 137 people
- Jump to TripAdvisor's Tourism page for Rocky Ford <3>
- Zeigler
(12 miles [19.3 km] to the east)
- Garfield
(14 miles [22.5 km] to the southwest)
- Sardis
(15 miles [24.1 km] to the northeast)
- Aaron
(16 miles [25.7 km] to the south)
- Ogeechee ‑ Historic
(16 miles [25.7 km] to the southeast)
- Hiltonia
(16 miles [25.7 km] to the east)
- Sylvania
(17 miles [27.4 km] to the east)
- Midville
(17 miles [27.4 km] to the west)
- Portal
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Portal have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Portal
- Portal is located in Bulloch County
- Population from the 2020 Census: 707 people
- Jump to TripAdvisor's Tourism page for Portal <3>
- Millhaven
(18 miles [29 km] to the northeast)
- Cooperville
(19 miles [30.6 km] to the southeast)
- Magruder
(19 miles [30.6 km] to the northwest)
- Summertown
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Summertown have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Summertown
- Summertown is located in Emanuel County
- Population from the 2020 Census: 156 people
- Jump to TripAdvisor's Tourism page for Summertown <3>
- Twin City
(20 miles [32.2 km] to the southwest)
- Waynesboro
(20 miles [32.2 km] to the north)
- Dover
(20 miles [32.2 km] to the southeast)
- Girard
(20 miles [32.2 km] to the northeast)
- Colemans Lake
(20 miles [32.2 km] to the west)
- Rosier
(21 miles [33.8 km] to the northwest)
Off-the-Road Links ...
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Millen City Cemetery. The point we use is located at these GPS coordinates - Latitude: 32.8063, Longitude: -81.9304 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|