Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Angelville in the Atlas, the following communities of the 1890's would have been found near the current location of Angelville. The following communities are listed based on their distance, with the one closest to Angelville listed first.
- Decora
(Less than 2 miles to the southeast)
- Decora is also located in Gordon County
- Jump to our Gazetteer entry for Decora
- Resaca
(3 miles [4.8 km] to the west)
- Crane Eater
(4 miles [6.4 km] to the south)
- Crane Eater is also located in Gordon County
- Jump to our Gazetteer entry for Crane Eater
- Fidelle
(4 miles [6.4 km] to the east)
- Fidelle is also located in Gordon County
- Jump to our Gazetteer entry for Fidelle
- Redbud
(5 miles [8 km] to the southeast)
- Redbud is also located in Gordon County
- Jump to our Gazetteer entry for Redbud
- Buff ‑ Historic
(5 miles [8 km] to the east)
- Buff was located in Gordon County
- Jump to our Gazetteer entry for Buff
- Estimated population in 2019: 15,522 people
- Tilton
(5 miles [8 km] to the northwest)
- Tilton is located in Whitfield County
- Jump to our Gazetteer entry for Tilton
- Calhoun
(6 miles [9.7 km] to the southwest)
- Coosawattee ‑ Historic
(6 miles [9.7 km] to the east)
- Coosawattee was located in Gordon County
- Jump to our Gazetteer entry for Coosawattee
- Sugar Valley
(7 miles [11.3 km] to the west)
- Cash
(7 miles [11.3 km] to the southeast)
- Cash is also located in Gordon County
- Jump to our Gazetteer entry for Cash
- Carbondale
(7 miles [11.3 km] to the northwest)
- Carbondale is located in Whitfield County
- Jump to our Gazetteer entry for Carbondale
- Wheeler ‑ Historic
(8 miles [12.9 km] to the east)
- Wheeler was located in Gordon County
- Jump to our Gazetteer entry for Wheeler
- Wells ‑ Historic
(8 miles [12.9 km] to the northeast)
- Wells was located in Murray County
- Jump to our Gazetteer entry for Wells
- McDaniels
(9 miles [14.5 km] to the south)
- McDaniels is also located in Gordon County
- Jump to our Gazetteer entry for McDaniels
- Petersburg
(9 miles [14.5 km] to the east)
- Petersburg is also located in Gordon County
- Jump to our Gazetteer entry for Petersburg
- Phelps
(9 miles [14.5 km] to the northwest)
- Phelps is located in Whitfield County
- Jump to our Gazetteer entry for Phelps
- Oostanaula
(10 miles [16.1 km] to the southwest)
- Oostanaula is also located in Gordon County
- Jump to our Gazetteer entry for Oostanaula
- Farmville
(10 miles [16.1 km] to the south)
- Farmville is also located in Gordon County
- Jump to our Gazetteer entry for Farmville
- Sonoraville
(10 miles [16.1 km] to the southeast)
- Sonoraville is also located in Gordon County
- Jump to our Gazetteer entry for Sonoraville
- Estimated population in 2019: 3,148 people
- Colima
(10 miles [16.1 km] to the east)
- Colima is also located in Gordon County
- Jump to our Gazetteer entry for Colima
- Ranger
(11 miles [17.7 km] to the southeast)
- Carters
(11 miles [17.7 km] to the east)
- Carters is located in Murray County
- Jump to our Gazetteer entry for Carters
- Rocky Creek ‑ Historic
(12 miles [19.3 km] to the southwest)
- Rocky Creek was located in Gordon County
- Jump to our Gazetteer entry for Rocky Creek
- Igo ‑ Historic
(12 miles [19.3 km] to the southeast)
- Igo was located in Gordon County
- Jump to our Gazetteer entry for Igo
- Estimated population in 2019: 359 people
- Dennis
(12 miles [19.3 km] to the northeast)
- Dennis is located in Murray County
- Jump to our Gazetteer entry for Dennis
- Spring Place
(12 miles [19.3 km] to the north)
- Spring Place is located in Murray County
- Jump to our Gazetteer entry for Spring Place
- Furnace ‑ Historic
(12 miles [19.3 km] to the west)
- Furnace was located in Walker County
- Jump to our Gazetteer entry for Furnace
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Angelville, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |