Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Enders (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Enders. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Enders is located in Faulkner County.
To see how the shape of Arkansas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Faulkner County: Cleburne, Conway, Lonoke, Perry, Pulaski, Van Buren & White.
Below are the counties that are near Enders. For each of these counties, we show a sample of those communities that are closest to Enders:
- Faulkner County (The home county of Enders)
- The following are listed by their distance from Enders, with the one closest to Enders listed first.
- Centerville
(4 miles [6.4 km] to the southwest)
- Guy
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Guy have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Guy
- Guy is located in Faulkner County
- Population from the 2020 Census: 792 people
- Enola
(9 miles [14.5 km] to the south)
- Mount Vernon
(9 miles [14.5 km] to the southeast)
- Holland
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Holland have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holland
- Holland is located in Faulkner County
- Population from the 2020 Census: 586 people
- Greenbrier
(11 miles [17.7 km] to the southwest)
- Twin Groves
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Twin Groves have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Twin Groves
- Twin Groves is located in Faulkner County
- Population from the 2020 Census: 334 people
- Wooster
(15 miles [24.1 km] to the southwest)
- Beryl
(16 miles [25.7 km] to the south)
- Vilonia
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Vilonia have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vilonia
- Vilonia is located in Faulkner County
- Population from the 2020 Census: 4,725 people
- Jump to TripAdvisor's Tourism page for Vilonia <2>
- Hamlet
(17 miles [27.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Hamlet. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hamlet
- Hamlet is located in Faulkner County
- Google driving directions:
- From your current location to Hamlet
- From Enders to Hamlet
- Otto
(20 miles [32.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Otto. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Otto
- Otto is located in Faulkner County
- Google driving directions:
- From your current location to Otto
- From Enders to Otto
- Conway
(20 miles [32.2 km] to the southwest)
- Cleburne County
- The following are listed by their distance from Enders, with the one closest to Enders listed first.
- Quitman
(4 miles [6.4 km] to the north)
- Pearson
(9 miles [14.5 km] to the northeast)
- Miller ‑ Historic
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Miller. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Miller
- Miller is located in Cleburne County
- Google driving directions:
- From your current location to Miller
- From Enders to Miller
- Yuba
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Yuba. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Yuba
- Yuba is located in Cleburne County
- Google driving directions:
- From your current location to Yuba
- From Enders to Yuba
- Shiloh ‑ Historic
(15 miles [24.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Shiloh. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Shiloh
- Shiloh is located in Cleburne County
- Google driving directions:
- From your current location to Shiloh
- From Enders to Shiloh
- Heber Springs
(15 miles [24.1 km] to the northeast)
- Higden
(16 miles [25.7 km] to the north)
- Greers Ferry
(17 miles [27.4 km] to the north)
- Edgemont
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Edgemont have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edgemont
- Edgemont is located in Cleburne County
- Jump to TripAdvisor's Tourism page for Edgemont <2>
- Tumbling Shoals
(20 miles [32.2 km] to the northeast)
- Rainbow Island
(22 miles [35.4 km] to the northeast)
- Wilburn
(22 miles [35.4 km] to the northeast)
- Ida
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Ida have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ida
- Ida is located in Cleburne County
- Jump to TripAdvisor's Tourism page for Ida <2>
- Conway County
- The following are listed by their distance from Enders, with the one closest to Enders listed first.
- Austin
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Austin have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Austin
- Austin is located in Conway County
- Jump to TripAdvisor's Tourism page for Austin <2>
- Springfield
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in Conway County
- Jump to TripAdvisor's Tourism page for Springfield <2>
- Center Ridge
(19 miles [30.6 km] to the west)
- Menifee
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Menifee have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Menifee
- Menifee is located in Conway County
- Population from the 2020 Census: 321 people
- Jump to TripAdvisor's Tourism page for Menifee <2>
- Middleton
(22 miles [35.4 km] to the west)
- Plumerville
(25 miles [40.2 km] to the southwest)
- Solgohachia
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Solgohachia have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Solgohachia
- Solgohachia is located in Conway County
- Cleveland
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Cleveland have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cleveland
- Cleveland is located in Conway County
- Jump to TripAdvisor's Tourism page for Cleveland <2>
- Lonoke County
- The following are listed by their distance from Enders, with the one closest to Enders listed first.
- Austin
(26 miles [41.8 km] to the southeast)
- Ward
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Ward have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ward
- Ward is located in Lonoke County
- Population from the 2020 Census: 5,486 people
- Jump to TripAdvisor's Tourism page for Ward <2>
- Cabot
(27 miles [43.5 km] to the southeast)
- Perry County
- The following are listed by their distance from Enders, with the one closest to Enders listed first.
- Toad Suck
(25 miles [40.2 km] to the southwest)
- Dixie ‑ Historic
(29 miles [46.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Dixie. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Dixie
- Dixie is located in Perry County
- Google driving directions:
- From your current location to Dixie
- From Enders to Dixie
- Pulaski County
- Gibson
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Gibson have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gibson
- Gibson is located in Pulaski County
- Van Buren County
- The following are listed by their distance from Enders, with the one closest to Enders listed first.
- Gravesville
(8 miles [12.9 km] to the northwest)
- Damascus
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Damascus have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Damascus
- Damascus is located in Van Buren County
- Population from the 2020 Census: 384 people
- Jump to TripAdvisor's Tourism page for Damascus <2>
- Morganton
(11 miles [17.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Morganton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Morganton
- Morganton is located in Van Buren County
- Google driving directions:
- From your current location to Morganton
- From Enders to Morganton
- Bee Branch
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Bee Branch have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bee Branch
- Bee Branch is located in Van Buren County
- Chalk ‑ Historic
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Chalk have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chalk
- Chalk is located in Van Buren County
- Green Tree
(15 miles [24.1 km] to the northwest)
- Eglantine
(18 miles [29 km] to the north)
- Choctaw
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Choctaw have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Choctaw
- Choctaw is located in Van Buren County
- Formosa
(18 miles [29 km] to the northwest)
- Fairfield Bay
(19 miles [30.6 km] to the north)
- Shirley
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Shirley have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shirley
- Shirley is located in Van Buren County
- Population from the 2020 Census: 276 people
- Jump to TripAdvisor's Tourism page for Shirley <2>
- Clinton
(22 miles [35.4 km] to the northwest)
- Scotland
(25 miles [40.2 km] to the northwest)
- White County
- The following are listed by their distance from Enders, with the one closest to Enders listed first.
- Rose Bud
(8 miles [12.9 km] to the east)
- Romance
(11 miles [17.7 km] to the southeast)
- El Paso
(15 miles [24.1 km] to the southeast)
- Floyd
(17 miles [27.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Floyd. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Floyd
- Floyd is located in White County
- Google driving directions:
- From your current location to Floyd
- From Enders to Floyd
- Center Hill
(19 miles [30.6 km] to the east)
- Letona
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Letona have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Letona
- Letona is located in White County
- Population from the 2020 Census: 244 people
- Pangburn
(23 miles [37 km] to the east)
- Clay
(25 miles [40.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Clay. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Clay
- Clay is located in White County
- Google driving directions:
- From your current location to Clay
- From Enders to Clay
- Beebe
(26 miles [41.8 km] to the southeast)
- McRae
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for McRae have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McRae
- McRae is located in White County
- Population from the 2020 Census: 671 people
- Searcy
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Searcy have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Searcy
- Searcy is located in White County
- Population from the 2020 Census: 23,543 people
- Jump to TripAdvisor's Tourism page for Searcy <2>
- Garner
(28 miles [45.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Garner. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Garner
- Garner is located in White County
- Population from the 2020 Census: 284 people
- Jump to TripAdvisor's Tourism page for Garner <2>
- Google driving directions:
- From your current location to Garner
- From Enders to Garner
- Higginson
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Higginson have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Higginson
- Higginson is located in White County
- Population from the 2020 Census: 743 people
For an expanded list of the communities that are closest to Enders, see our County-by-County Page for Enders.
Cemeteries Near Enders ...
Below are cemeteries that are in the vicinity of Enders.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Enders covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Enders, with the one closest to Enders listed first.
- Mortar Creek Cemetery
(Less than 2 miles to the northeast)
- Jump to our Gazetteer entry for the Mortar Creek Cemetery
- Note: The GPS coordinates that we are using for the Mortar Creek Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Mt. Pleasant Cemetery
(2 miles [3.2 km] to the northwest)
- Jump to our Gazetteer entry for the Mt. Pleasant Cemetery
- Note: The GPS coordinates that we are using for the Mt. Pleasant Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- McNew Cemetery
(3 miles [4.8 km] to the southwest)
- Jump to our Gazetteer entry for the McNew Cemetery
- Note: The GPS coordinates that we are using for the McNew Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- King Cemetery
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for the King Cemetery
- Note: The GPS coordinates that we are using for the King Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Old Texas Cemetery
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for the Old Texas Cemetery
- Note: The GPS coordinates that we are using for the Old Texas Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Hardy Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Hardy Cemetery
- Note: The GPS coordinates that we are using for the Hardy Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Brown Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Brown Cemetery
- Note: The GPS coordinates that we are using for the Brown Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Center Point Baptist Church Cemetery
(4 miles [6.4 km] to the northeast)
- Quitman Cemetery
(4 miles [6.4 km] to the north)
- Mode Cemetery
(5 miles [8 km] to the west)
- Central Cemetery
(6 miles [9.7 km] to the north)
- Goodloe Cemetery
(6 miles [9.7 km] to the north)
- Continue List (231 more) ...
- Holland Cemetery
(6 miles [9.7 km] to the northwest)
- Copperas Springs Cemetery
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for the Copperas Springs Cemetery
- Note: The GPS coordinates that we are using for the Copperas Springs Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Henderson Cemetery
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for the Henderson Cemetery
- Note: The GPS coordinates that we are using for the Henderson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>
The Rand McNally Atlas shows that in 1895, Enders had a post office and no railroad service.
These communities are listed based on their distance from Enders, with the one closest to Enders listed first.
- Quitman
(4 miles [6.4 km] to the north)
- Barney
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Barney have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barney
- Barney is located in Faulkner County
- Guy
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Guy have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Guy
- Guy is located in Faulkner County
- Population from the 2020 Census: 792 people
- Rose Bud
(8 miles [12.9 km] to the east)
- Enola
(9 miles [14.5 km] to the south)
- Mount Vernon
(9 miles [14.5 km] to the southeast)
- Pinnacle Springs ‑ Historic
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Pinnacle Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinnacle Springs
- Pinnacle Springs is located in Faulkner County
- Damascus
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Damascus have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Damascus
- Damascus is located in Van Buren County
- Population from the 2020 Census: 384 people
- Jump to TripAdvisor's Tourism page for Damascus <2>
- Greenbrier
(11 miles [17.7 km] to the southwest)
- Holland
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Holland have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holland
- Holland is located in Faulkner County
- Population from the 2020 Census: 586 people
- Romance
(11 miles [17.7 km] to the southeast)
- Morganton
(11 miles [17.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Morganton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Morganton
- Morganton is located in Van Buren County
- Google driving directions:
- From your current location to Morganton
- From Enders to Morganton
- Continue List (16 more) ...
- Linder
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Linder have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linder
- Linder is located in Faulkner County
- Bristol ‑ Historic
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Bristol have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bristol
- Bristol is located in Faulkner County
- Turnip ‑ Historic
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Turnip have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turnip
- Turnip is located in White County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Enders. See our List of 1890's Communities around Enders.
Newspapers Published in Enders ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 42 newspapers that have been published in the area around Enders.
Although we're unaware of any newspapers that were published in the immediate area of Enders, there are papers which were published within 22 miles [35.4 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Enders.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Enders:
- Websites specific to Arkansas
- Pages specific to Faulkner County
- Genealogy information for nearby counties
- Cleburne County
- Conway County
- Lonoke County
- Perry County
- Pulaski County
- Van Buren County
- White County
- Cemetery Information and Directories for Arkansas
Off-the-Road Links ...
Unfortunately, we don't know of a website for Enders. If you can help, please contact us through our Feedback Page.
The official website for State of Arkansas: https://portal.arkansas.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Enders) to Point B.Our distance measurements begin at a specific point in Enders. The point we use is located at these GPS coordinates - Latitude: 35.3266, Longitude: -92.2285 |
<5> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<6> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Enders, please let us know so that we can improve our accuracy. |