RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Williamson County >> Andice >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Andice (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Andice. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Andice is located in Williamson County.

To see how the shape of Texas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Williamson County: Bastrop, Bell, Burnet, Lee, Milam & Travis.

Below are the counties that are near Andice. For each of these counties, we show a sample of those communities that are closest to Andice:

  • Williamson County     (The home county of Andice)
    • The following are listed by their distance from Andice, with the one closest to Andice listed first.
    • Florence
      (5 miles [8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Florence
      • Florence is located in Williamson County
      • Population from the 2020 Census: 1,304 people
      • Jump to TripAdvisor's Tourism page for Florence <2>
    • Liberty Hill
      (8 miles [12.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Liberty Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Liberty Hill
      • Liberty Hill is located in Williamson County
      • Population from the 2020 Census: 3,549 people
      • Jump to TripAdvisor's Tourism page for Liberty Hill <2>
    • Sun City
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Sun City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sun City
      • Sun City is located in Williamson County
    • Serenada
      (11 miles [17.7 km] to the southeast)
      • Jump to our Gazetteer entry for Serenada
      • Serenada is located in Williamson County
    • Jarrell
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for Jarrell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jarrell
      • Jarrell is located in Williamson County
      • Population from the 2020 Census: 2,077 people
      • Jump to TripAdvisor's Tourism page for Jarrell <2>
    • Leander
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Leander have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Leander
      • Leander is located in Williamson County
      • Population from the 2020 Census: 70,519 people
      • Jump to TripAdvisor's Tourism page for Leander <2>
    • Georgetown
      (14 miles [22.5 km] to the southeast)
    • Walburg
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Walburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walburg
      • Walburg is located in Williamson County
      • Jump to TripAdvisor's Tourism page for Walburg <2>
    • Weir
      (17 miles [27.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Weir have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Weir
      • Weir is located in Williamson County
      • Population from the 2020 Census: 549 people
      • Jump to TripAdvisor's Tourism page for Weir <2>
    • Cedar Park
      (18 miles [29 km] to the south)
      • Note: The GPS coordinates that we are using for Cedar Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cedar Park
      • Cedar Park is located in Williamson County
      • Population from the 2020 Census: 81,040 people
      • Jump to TripAdvisor's Tourism page for Cedar Park <2>
    • Brushy Creek
      (19 miles [30.6 km] to the south)
      • Note: The GPS coordinates that we are using for Brushy Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brushy Creek
      • Brushy Creek is located in Williamson County
    • Round Rock
      (20 miles [32.2 km] to the southeast)
  • Bell County
    • The following are listed by their distance from Andice, with the one closest to Andice listed first.
    • Ding Dong
      (14 miles [22.5 km] to the north)
      • Jump to our Gazetteer entry for Ding Dong
      • Ding Dong is located in Bell County
    • Maxdale ‑ Historic
      (14 miles [22.5 km] to the north)
      • Note: The GPS coordinates that we are using for Maxdale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maxdale
      • Maxdale is located in Bell County
    • Killeen
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Killeen have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Killeen
      • Killeen is located in Bell County
      • Population from the 2020 Census: 153,991 people
      • Jump to TripAdvisor's Tourism page for Killeen <2>
    • Harker Heights
      (22 miles [35.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Harker Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harker Heights
      • Harker Heights is located in Bell County
      • Population from the 2020 Census: 33,071 people
      • Jump to TripAdvisor's Tourism page for Harker Heights <2>
    • Salado
      (22 miles [35.4 km] to the northeast)
    • Copperas Cove
      (23 miles [37 km] to the north)
      • Note: The GPS coordinates that we are using for Copperas Cove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Copperas Cove
      • Copperas Cove is located in Bell County
      • Population from the 2020 Census: 33,498 people
      • Jump to TripAdvisor's Tourism page for Copperas Cove <2>
    • Bartlett
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Bartlett have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bartlett
      • Bartlett is located in Bell County
      • Population from the 2020 Census: 1,766 people
      • Jump to TripAdvisor's Tourism page for Bartlett <2>
    • Chaffee Village
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Chaffee Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chaffee Village
      • Chaffee Village is located in Bell County
    • Fort Hood
      (24 miles [38.6 km] to the north)
    • McNair Village
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for McNair Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McNair Village
      • McNair Village is located in Bell County
    • Walker Village
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for Walker Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walker Village
      • Walker Village is located in Bell County
    • Nolanville
      (25 miles [40.2 km] to the northeast)
  • Burnet County
    • The following are listed by their distance from Andice, with the one closest to Andice listed first.
    • Briggs
      (8 miles [12.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Briggs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Briggs
      • Briggs is located in Burnet County
      • Jump to TripAdvisor's Tourism page for Briggs <2>
    • Bertram
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Bertram have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bertram
      • Bertram is located in Burnet County
      • Population from the 2020 Census: 1,520 people
      • Jump to TripAdvisor's Tourism page for Bertram <2>
    • Oatmeal
      (15 miles [24.1 km] to the southwest)
    • Burnet
      (22 miles [35.4 km] to the west)
    • Mormon Mill ‑ Historic
      (24 miles [38.6 km] to the southwest)
      • Jump to our Gazetteer entry for Mormon Mill
      • Mormon Mill is located in Burnet County
      • Mormon Mill has also been known as:
      • Mormon Colony
    • Spicewood
      (27 miles [43.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Spicewood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spicewood
      • Spicewood is located in Burnet County
      • Jump to TripAdvisor's Tourism page for Spicewood <2>
    • Marble Falls
      (28 miles [45.1 km] to the southwest)
    • Meadowlakes
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Meadowlakes have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Meadowlakes
      • Meadowlakes is located in Burnet County
      • Population from the 2020 Census: 1,733 people
  • Coryell County
    • The following are listed by their distance from Andice, with the one closest to Andice listed first.
    • Montague Village
      (23 miles [37 km] to the north)
      • Note: The GPS coordinates that we are using for Montague Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Montague Village
      • Montague Village is located in Coryell County
    • Comanche Village I
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Comanche Village I have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Comanche Village I
      • Comanche Village I is located in Coryell County
    • Comanche Village II
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Comanche Village II have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Comanche Village II
      • Comanche Village II is located in Coryell County
    • Comanche Village III
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Comanche Village III have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Comanche Village III
      • Comanche Village III is located in Coryell County
    • Mason Crossing ‑ Historic
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Mason Crossing have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mason Crossing
      • Mason Crossing is located in Coryell County
    • Saint Elijah Village
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Saint Elijah Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Elijah Village
      • Saint Elijah Village is located in Coryell County
  • Lampasas County
    • The following are listed by their distance from Andice, with the one closest to Andice listed first.
    • Kempner
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Kempner have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kempner
      • Kempner is located in Lampasas County
      • Population from the 2020 Census: 1,160 people
      • Jump to TripAdvisor's Tourism page for Kempner <2>
    • Sparks Crossing ‑ Historic
      (26 miles [41.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Sparks Crossing have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sparks Crossing
      • Sparks Crossing is located in Lampasas County
    • Lampasas
      (27 miles [43.5 km] to the northwest)
  • Travis County
    • The following are listed by their distance from Andice, with the one closest to Andice listed first.
    • Nameless ‑ Historic
      (18 miles [29 km] to the south)
      • Jump to our Gazetteer entry for Nameless
      • Nameless is located in Travis County
      • Nameless has also been known as:
      • Cross Creek
      • Fairview
    • Jonestown
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Jonestown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jonestown
      • Jonestown is located in Travis County
      • Population from the 2020 Census: 2,169 people
      • Jump to TripAdvisor's Tourism page for Jonestown <2>
    • Lago Vista
      (23 miles [37 km] to the south)
    • Volente
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Volente have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Volente
      • Volente is located in Travis County
      • Population from the 2020 Census: 589 people
      • Jump to TripAdvisor's Tourism page for Volente <2>
    • Hudson Bend
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Hudson Bend have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hudson Bend
      • Hudson Bend is located in Travis County
    • Kings Village
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Kings Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kings Village
      • Kings Village is located in Travis County
    • Three Points
      (25 miles [40.2 km] to the southeast)
      • Jump to our Gazetteer entry for Three Points
      • Three Points is located in Travis County
    • Wells Branch
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Wells Branch have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wells Branch
      • Wells Branch is located in Travis County
    • Windemere
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Windemere have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Windemere
      • Windemere is located in Travis County
    • Pflugerville
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Pflugerville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pflugerville
      • Pflugerville is located in Travis County
      • Population from the 2020 Census: 66,826 people
      • Jump to TripAdvisor's Tourism page for Pflugerville <2>
    • Buffalo Gap
      (28 miles [45.1 km] to the south)
    • Briarcliff
      (28 miles [45.1 km] to the southwest)

For an expanded list of the communities that are closest to Andice, see our County-by-County Page for Andice.

Newspapers Published in Andice ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 45 newspapers that have been published in the area around Andice.

Although we're unaware of any newspapers that were published in the immediate area of Andice, there are papers which were published within 30 miles [48.3 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Andice.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Andice:

Cemeteries Near Andice ...

Below are cemeteries that are in the vicinity of Andice.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Andice covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Andice, with the one closest to Andice listed first.

  • Andice Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Andice Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Andice Cemetery
  • Smart Cemetery
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for the Smart Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Smart Cemetery
  • Wesley Chapel Cemetery
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Wesley Chapel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Wesley Chapel Cemetery
  • Matsler Cemetery
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for the Matsler Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Matsler Cemetery
  • Gabriel Mills Cemetery
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for the Gabriel Mills Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Gabriel Mills Cemetery
  • Buck Cemetery
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Buck Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Buck Cemetery
  • Fore Cemetery
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for the Fore Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Fore Cemetery
  • Rocky Hollow Cemetery
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Rocky Hollow Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Rocky Hollow Cemetery
  • Mt. Horeb Cemetery
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for the Mt. Horeb Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mt. Horeb Cemetery
  • Anderson Cemetery
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for the Anderson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Anderson Cemetery
  • Ratliff Cemetery
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for the Ratliff Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Ratliff Cemetery
  • Mahomet Cemetery
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Mahomet Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mahomet Cemetery
  • Continue List   (135 more) ...
    • Hunt Cemetery
      (6 miles [9.7 km] to the south)
      • Note: The GPS coordinates that we are using for the Hunt Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Hunt Cemetery
    • Bullion Cemetery
      (6 miles [9.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for the Bullion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Bullion Cemetery
    • Fairview Cemetery
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for the Fairview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Fairview Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find Andice in the Atlas, the following 1895 communities would have been found near the current location of Andice.

These communities are listed based on their distance from Andice, with the one closest to Andice listed first.

  • Florence
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Florence
    • Florence is located in Williamson County
    • Population from the 2020 Census: 1,304 people
    • Jump to TripAdvisor's Tourism page for Florence <2>
  • Mahomet
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Mahomet have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mahomet
    • Mahomet is located in Burnet County
  • Liberty Hill
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Liberty Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Liberty Hill
    • Liberty Hill is located in Williamson County
    • Population from the 2020 Census: 3,549 people
    • Jump to TripAdvisor's Tourism page for Liberty Hill <2>
  • Bertram
    (12 miles [19.3 km] to the west)
    • Note: The GPS coordinates that we are using for Bertram have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bertram
    • Bertram is located in Burnet County
    • Population from the 2020 Census: 1,520 people
    • Jump to TripAdvisor's Tourism page for Bertram <2>
  • Leander
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Leander have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leander
    • Leander is located in Williamson County
    • Population from the 2020 Census: 70,519 people
    • Jump to TripAdvisor's Tourism page for Leander <2>
  • Oakalla
    (14 miles [22.5 km] to the north)
    • Note: The GPS coordinates that we are using for Oakalla have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oakalla
    • Oakalla is located in Burnet County
  • Georgetown
    (14 miles [22.5 km] to the southeast)
  • Corn Hill
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Corn Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Corn Hill
    • Corn Hill is located in Williamson County
  • Youngsport
    (14 miles [22.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Youngsport have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Youngsport
    • Youngsport is located in Bell County
  • Maxdale ‑ Historic
    (14 miles [22.5 km] to the north)
    • Note: The GPS coordinates that we are using for Maxdale have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maxdale
    • Maxdale is located in Bell County
  • Theon
    (15 miles [24.1 km] to the east)
    • Note: The GPS coordinates that we are using for Theon have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Theon
    • Theon is located in Williamson County
  • Walburg
    (16 miles [25.7 km] to the east)
    • Note: The GPS coordinates that we are using for Walburg have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Walburg
    • Walburg is located in Williamson County
    • Jump to TripAdvisor's Tourism page for Walburg <2>
  • Continue List   (15 more) ...
    • Cedar Park
      (18 miles [29 km] to the south)
      • Note: The GPS coordinates that we are using for Cedar Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cedar Park
      • Cedar Park is located in Williamson County
      • Population from the 2020 Census: 81,040 people
      • Jump to TripAdvisor's Tourism page for Cedar Park <2>
    • Sunnylane
      (19 miles [30.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Sunnylane have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sunnylane
      • Sunnylane is located in Burnet County
    • Round Rock
      (20 miles [32.2 km] to the southeast)

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Andice. See our List of 1890's Communities around Andice.

Unfortunately, we don't know of a website for Andice. If you can help, please contact us through our Feedback Page.

The official website for Williamson County: www.wilco.org/

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Andice) to Point B.Our distance measurements begin at a specific point in Andice. The point we use is located at these GPS coordinates - Latitude: 30.7824, Longitude: -97.8525    
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Andice, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024