RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of West Virginia >> Harrison County >> Lumberport >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
West Virginia


The Commemorative Quarter for West Virginia







Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Lumberport (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Lumberport. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Lumberport is located in Harrison County.

To see how the shape of West Virginia's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Harrison County: Barbour, Doddridge, Lewis, Marion, Taylor, Upshur & Wetzel.

Below are the counties that are near Lumberport. For each of these counties, we show a sample of those communities that are closest to Lumberport:

  • Harrison County     (The home county of Lumberport)
  • Barbour County
    • The following are listed by their distance from Lumberport, with the one closest to Lumberport listed first.
    • Pepper
      (16 miles [25.7 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Pepper. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Pepper
      • Pepper is located in Barbour County
      • Google driving directions:
      • From your current location to Pepper
      • From Lumberport to Pepper
    • Adaland
      (18 miles [29 km] to the southeast)
    • Berryburg
      (18 miles [29 km] to the southeast)
    • Pleasant Creek ‑ Historic
      (19 miles [30.6 km] to the southeast)
    • Elk City
      (20 miles [32.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Elk City have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elk City
      • Elk City is located in Barbour County
    • Wellington Heights
      (21 miles [33.8 km] to the southeast)
    • Arden
      (22 miles [35.4 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Arden. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Arden
      • Arden is located in Barbour County
      • Google driving directions:
      • From your current location to Arden
      • From Lumberport to Arden
    • Clemtown
      (22 miles [35.4 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Clemtown. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Clemtown
      • Clemtown is located in Barbour County
      • Google driving directions:
      • From your current location to Clemtown
      • From Lumberport to Clemtown
    • Meriden
      (22 miles [35.4 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Meriden. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Meriden
      • Meriden is located in Barbour County
      • Google driving directions:
      • From your current location to Meriden
      • From Lumberport to Meriden
    • Philippi
      (22 miles [35.4 km] to the southeast)
    • Tygart Junction
      (24 miles [38.6 km] to the southeast)
    • Union
      (25 miles [40.2 km] to the southeast)
    • Vannoys Mill
      (26 miles [41.8 km] to the southeast)
  • Doddridge County
    • The following are listed by their distance from Lumberport, with the one closest to Lumberport listed first.
    • Big Isaac
      (15 miles [24.1 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Big Isaac. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Big Isaac
      • Big Isaac is located in Doddridge County
      • Google driving directions:
      • From your current location to Big Isaac
      • From Lumberport to Big Isaac
    • Doak
      (15 miles [24.1 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Doak. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Doak
      • Doak is located in Doddridge County
      • Google driving directions:
      • From your current location to Doak
      • From Lumberport to Doak
    • Roberts
      (17 miles [27.4 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Roberts. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Roberts
      • Roberts is located in Doddridge County
      • Google driving directions:
      • From your current location to Roberts
      • From Lumberport to Roberts
    • Avon
      (20 miles [32.2 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Avon. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Avon
      • Avon is located in Doddridge County
      • Google driving directions:
      • From your current location to Avon
      • From Lumberport to Avon
    • Coldwater
      (20 miles [32.2 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Coldwater. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Coldwater
      • Coldwater is located in Doddridge County
      • Google driving directions:
      • From your current location to Coldwater
      • From Lumberport to Coldwater
    • New Milton
      (20 miles [32.2 km] to the southwest)
    • Smithburg
      (21 miles [33.8 km] to the west)
    • Market
      (22 miles [35.4 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Market. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Market
      • Market is located in Doddridge County
      • Google driving directions:
      • From your current location to Market
      • From Lumberport to Market
    • West Union
      (23 miles [37 km] to the west)
    • Saint Clara
      (25 miles [40.2 km] to the southwest)
    • Grove
      (27 miles [43.5 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Grove. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Grove
      • Grove is located in Doddridge County
      • Google driving directions:
      • From your current location to Grove
      • From Lumberport to Grove
    • Duckworth
      (29 miles [46.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Duckworth. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Duckworth
      • Duckworth is located in Doddridge County
      • Google driving directions:
      • From your current location to Duckworth
      • From Lumberport to Duckworth
  • Gilmer County
    • Conings
      (30 miles [48.3 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Conings. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Conings
      • Conings is located in Gilmer County
      • Google driving directions:
      • From your current location to Conings
      • From Lumberport to Conings
  • Lewis County
    • The following are listed by their distance from Lumberport, with the one closest to Lumberport listed first.
    • Jane Lew
      (18 miles [29 km] to the south)
    • Lightburn
      (18 miles [29 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Lightburn. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Lightburn
      • Lightburn is located in Lewis County
      • Google driving directions:
      • From your current location to Lightburn
      • From Lumberport to Lightburn
    • Westfield
      (19 miles [30.6 km] to the south)
    • Valley Chapel
      (19 miles [30.6 km] to the southwest)
    • Aberdeen
      (21 miles [33.8 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Aberdeen. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Aberdeen
      • Aberdeen is located in Lewis County
      • Google driving directions:
      • From your current location to Aberdeen
      • From Lumberport to Aberdeen
    • Berlin
      (22 miles [35.4 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Berlin. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Berlin
      • Berlin is located in Lewis County
      • Google driving directions:
      • From your current location to Berlin
      • From Lumberport to Berlin
    • Smith Village
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Smith Village have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Smith Village
      • Smith Village is located in Lewis County
    • Weston
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Weston have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Weston
      • Weston is located in Lewis County
      • Population from the 2020 Census: 3,797 people
      • Jump to TripAdvisor's Tourism page for Weston <2>
    • Cox Town
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Cox Town have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cox Town
      • Cox Town is located in Lewis County
    • Garton Village
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Garton Village have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Garton Village
      • Garton Village is located in Lewis County
    • Camden
      (25 miles [40.2 km] to the southwest)
    • Alkires Mills
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Alkires Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alkires Mills
      • Alkires Mills is located in Lewis County
    • Alum Bridge
      (28 miles [45.1 km] to the southwest)
  • Marion County
    • The following are listed by their distance from Lumberport, with the one closest to Lumberport listed first.
    • Big Run
      (6 miles [9.7 km] to the north)
    • Helens Run
      (7 miles [11.3 km] to the northeast)
    • Worthington
      (7 miles [11.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Worthington have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Worthington
      • Worthington is located in Marion County
      • Population from the 2020 Census: 148 people
      • Jump to TripAdvisor's Tourism page for Worthington <2>
    • Eldora
      (8 miles [12.9 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Eldora. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Eldora
      • Eldora is located in Marion County
      • Google driving directions:
      • From your current location to Eldora
      • From Lumberport to Eldora
    • Monongah
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Monongah have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Monongah
      • Monongah is located in Marion County
      • Population from the 2020 Census: 1,160 people
      • Jump to TripAdvisor's Tourism page for Monongah <2>
    • Whitehall
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Whitehall have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Whitehall
      • Whitehall is located in Marion County
      • Population from the 2020 Census: 666 people
    • Logansport
      (10 miles [16.1 km] to the north)
    • Mannington
      (10 miles [16.1 km] to the north)
    • Farmington
      (10 miles [16.1 km] to the northeast)
    • Katy
      (11 miles [17.7 km] to the northeast)
    • Watson
      (11 miles [17.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Watson have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Watson
      • Watson is located in Marion County
    • Colfax
      (12 miles [19.3 km] to the east)
    • Garden Village
      (12 miles [19.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Garden Village have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Garden Village
      • Garden Village is located in Marion County
  • Marshall County
    • The following are listed by their distance from Lumberport, with the one closest to Lumberport listed first.
    • Bannen
      (27 miles [43.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Bannen. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Bannen
      • Bannen is located in Marshall County
      • Google driving directions:
      • From your current location to Bannen
      • From Lumberport to Bannen
    • Kausooth
      (29 miles [46.7 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Kausooth. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Kausooth
      • Kausooth is located in Marshall County
      • Google driving directions:
      • From your current location to Kausooth
      • From Lumberport to Kausooth
  • Monongalia County
    • The following are listed by their distance from Lumberport, with the one closest to Lumberport listed first.
    • Sandy
      (19 miles [30.6 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Sandy. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Sandy
      • Sandy is located in Monongalia County
      • Google driving directions:
      • From your current location to Sandy
      • From Lumberport to Sandy
    • Smithtown
      (19 miles [30.6 km] to the northeast)
    • Wadestown
      (20 miles [32.2 km] to the north)
    • Arnettsville
      (20 miles [32.2 km] to the northeast)
    • Georgetown
      (20 miles [32.2 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Georgetown. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Georgetown
      • Georgetown is located in Monongalia County
      • Google driving directions:
      • From your current location to Georgetown
      • From Lumberport to Georgetown
    • Hagans
      (20 miles [32.2 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Hagans. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Hagans
      • Hagans is located in Monongalia County
      • Google driving directions:
      • From your current location to Hagans
      • From Lumberport to Hagans
    • Miracle Run
      (21 miles [33.8 km] to the north)
    • Saint Cloud
      (22 miles [35.4 km] to the north)
    • Wana
      (22 miles [35.4 km] to the north)
    • Little Falls
      (22 miles [35.4 km] to the northeast)
    • Maple
      (23 miles [37 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Maple. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Maple
      • Maple is located in Monongalia County
      • Google driving directions:
      • From your current location to Maple
      • From Lumberport to Maple
    • Blacksville
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Blacksville have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blacksville
      • Blacksville is located in Monongalia County
      • Population from the 2020 Census: 183 people
    • Laurel Point
      (24 miles [38.6 km] to the northeast)
  • Preston County
  • Ritchie County
    • The following are listed by their distance from Lumberport, with the one closest to Lumberport listed first.
    • Mountain
      (30 miles [48.3 km] to the west)
    • Stanley
      (30 miles [48.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Stanley. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Stanley
      • Stanley is located in Ritchie County
      • Google driving directions:
      • From your current location to Stanley
      • From Lumberport to Stanley
  • Taylor County
  • Tyler County
  • Upshur County
    • The following are listed by their distance from Lumberport, with the one closest to Lumberport listed first.
    • Teter
      (23 miles [37 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Teter. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Teter
      • Teter is located in Upshur County
      • Google driving directions:
      • From your current location to Teter
      • From Lumberport to Teter
    • Buckhannon
      (27 miles [43.5 km] to the south)
    • Reger
      (28 miles [45.1 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Reger. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Reger
      • Reger is located in Upshur County
      • Google driving directions:
      • From your current location to Reger
      • From Lumberport to Reger
    • Swamp Run
      (28 miles [45.1 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Swamp Run. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Swamp Run
      • Swamp Run is located in Upshur County
      • Google driving directions:
      • From your current location to Swamp Run
      • From Lumberport to Swamp Run
    • Overhill
      (30 miles [48.3 km] to the south)
  • Wetzel County
    • The following are listed by their distance from Lumberport, with the one closest to Lumberport listed first.
    • Smithfield
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Smithfield have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Smithfield
      • Smithfield is located in Wetzel County
      • Population from the 2020 Census: 142 people
      • Jump to TripAdvisor's Tourism page for Smithfield <2>
    • Bane
      (15 miles [24.1 km] to the northwest)
    • Fallen Timber ‑ Historic
      (15 miles [24.1 km] to the northwest)
    • Kodol
      (19 miles [30.6 km] to the northwest)
    • Ross
      (20 miles [32.2 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Ross. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Ross
      • Ross is located in Wetzel County
      • Google driving directions:
      • From your current location to Ross
      • From Lumberport to Ross
    • Anthem
      (21 miles [33.8 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Anthem. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Anthem
      • Anthem is located in Wetzel County
      • Google driving directions:
      • From your current location to Anthem
      • From Lumberport to Anthem
    • Barker
      (21 miles [33.8 km] to the northwest)
    • Uniontown
      (21 miles [33.8 km] to the northwest)
    • Hundred
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Hundred have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hundred
      • Hundred is located in Wetzel County
      • Population from the 2020 Census: 258 people
      • Jump to TripAdvisor's Tourism page for Hundred <2>
    • Round Bottom
      (22 miles [35.4 km] to the north)
    • Pine Grove
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Pine Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pine Grove
      • Pine Grove is located in Wetzel County
      • Population from the 2020 Census: 472 people
      • Jump to TripAdvisor's Tourism page for Pine Grove <2>
    • Littleton
      (24 miles [38.6 km] to the north)
    • Bebee
      (27 miles [43.5 km] to the northwest)
  • Fayette County (PA)
    • Fairchance
      (29 miles [46.7 km] to the northeast)
  • Greene County (PA)
    • The following are listed by their distance from Lumberport, with the one closest to Lumberport listed first.
    • Jollytown
      (24 miles [38.6 km] to the north)
    • New Freeport
      (26 miles [41.8 km] to the north)
    • Ashtree
      (27 miles [43.5 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Ashtree. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Ashtree
      • Ashtree is located in Greene County (PA)
      • Google driving directions:
      • From your current location to Ashtree
      • From Lumberport to Ashtree
    • Spraggs
      (28 miles [45.1 km] to the north)
    • Mount Morris
      (28 miles [45.1 km] to the northeast)
    • Bluff
      (29 miles [46.7 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Bluff. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Bluff
      • Bluff is located in Greene County (PA)
      • Google driving directions:
      • From your current location to Bluff
      • From Lumberport to Bluff
    • Nettle Hill
      (29 miles [46.7 km] to the north)
    • Gump
      (30 miles [48.3 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Gump. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Gump
      • Gump is located in Greene County (PA)
      • Google driving directions:
      • From your current location to Gump
      • From Lumberport to Gump

For an expanded list of the communities that are closest to Lumberport, see our County-by-County Page for Lumberport.

Cemeteries Near Lumberport ...

Below are cemeteries that are in the vicinity of Lumberport.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Lumberport covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Lumberport, with the one closest to Lumberport listed first.

  • Robinson Cemetery
    (Less than 2 miles to the southwest)
    • Jump to our Gazetteer entry for the Robinson Cemetery
    • Note: The GPS coordinates that we are using for the Robinson Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Garrett Cemetery
    (2 miles [3.2 km] to the south)
    • Jump to our Gazetteer entry for the Garrett Cemetery
    • Note: The GPS coordinates that we are using for the Garrett Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Hepzibah Cemetery
    (2 miles [3.2 km] to the south)
    • Jump to our Gazetteer entry for the Hepzibah Cemetery
    • Note: The GPS coordinates that we are using for the Hepzibah Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Barnes Cemetery
    (2 miles [3.2 km] to the east)
    • Jump to our Gazetteer entry for the Barnes Cemetery
    • Note: The GPS coordinates that we are using for the Barnes Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Shinnston Memorial Cemetery
    (2 miles [3.2 km] to the east)
  • Duncan Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the Duncan Cemetery
    • Note: The GPS coordinates that we are using for the Duncan Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Wyatt Cemetery
    (3 miles [4.8 km] to the north)
    • Jump to our Gazetteer entry for the Wyatt Cemetery
    • Note: The GPS coordinates that we are using for the Wyatt Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Richardson Cemetery
    (3 miles [4.8 km] to the north)
    • Jump to our Gazetteer entry for the Richardson Cemetery
    • Note: The GPS coordinates that we are using for the Richardson Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Allen Cemetery
    (3 miles [4.8 km] to the south)
    • Jump to our Gazetteer entry for the Allen Cemetery
    • Note: The GPS coordinates that we are using for the Allen Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Cunningham Cemetery
    (3 miles [4.8 km] to the north)
    • Jump to our Gazetteer entry for the Cunningham Cemetery
    • Note: The GPS coordinates that we are using for the Cunningham Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Hood Cemetery
    (3 miles [4.8 km] to the northeast)
    • Jump to our Gazetteer entry for the Hood Cemetery
    • Note: The GPS coordinates that we are using for the Hood Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Pine Bluff Cemetery
    (3 miles [4.8 km] to the north)
    • Jump to our Gazetteer entry for the Pine Bluff Cemetery
    • Note: The GPS coordinates that we are using for the Pine Bluff Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Continue List   (583 more) ...
    • Griffin Cemetery
      (3 miles [4.8 km] to the northwest)
      • Jump to our Gazetteer entry for the Griffin Cemetery
      • Note: The GPS coordinates that we are using for the Griffin Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Boggess Cemetery
      (3 miles [4.8 km] to the northwest)
      • Jump to our Gazetteer entry for the Boggess Cemetery
      • Note: The GPS coordinates that we are using for the Boggess Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Hall Cemetery
      (3 miles [4.8 km] to the west)
      • Jump to our Gazetteer entry for the Hall Cemetery
      • Note: The GPS coordinates that we are using for the Hall Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that Lumberport had a population of 107 people in 1895 with a post office and no railroad service. In 2020, Lumberport had a population of 835 people.

These communities are listed based on their distance from Lumberport, with the one closest to Lumberport listed first.

  • Prospect Valley
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for Prospect Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Prospect Valley
    • Prospect Valley is located in Harrison County
  • Shinnston
    (2 miles [3.2 km] to the northeast)
  • Pine Bluff
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for Pine Bluff have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pine Bluff
    • Pine Bluff is located in Harrison County
  • Jimtown
    (3 miles [4.8 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Jimtown. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Jimtown
    • Jimtown is located in Harrison County
    • Google driving directions:
    • From your current location to Jimtown
    • From Lumberport to Jimtown
  • Dola
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for Dola have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dola
    • Dola is located in Harrison County
  • Sardis
    (4 miles [6.4 km] to the southwest)
  • Glen Falls
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Glen Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Glen Falls
    • Glen Falls is located in Harrison County
  • Enterprise
    (4 miles [6.4 km] to the northeast)
  • Wyatt
    (4 miles [6.4 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Wyatt. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Wyatt
    • Wyatt is located in Harrison County
    • Google driving directions:
    • From your current location to Wyatt
    • From Lumberport to Wyatt
  • Adamston
    (5 miles [8 km] to the south)
  • Adamsville
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Adamsville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Adamsville
    • Adamsville is located in Harrison County
  • Sturms Mill
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Sturms Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sturms Mill
    • Sturms Mill is located in Marion County
  • Continue List   (14 more) ...

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Lumberport. See our List of 1890's Communities around Lumberport.

Newspapers Published in Lumberport ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 48 newspapers that have been published in the area around Lumberport.

Although we're unaware of any newspapers that were published in the immediate area of Lumberport, there are papers which were published within 10 miles [16.1 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Lumberport.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Lumberport:

Unfortunately, we don't know of a website for Lumberport. If you can help, please contact us through our Feedback Page.

The official website for Harrison County: www.harrisoncountywv.com/

The official website for State of West Virginia: https://www.wv.gov/

Footnotes ...

<1>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Lumberport, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Lumberport) to Point B.Our distance measurements begin at a specific point in Lumberport. The point we use is located at these GPS coordinates - Latitude: 39.3747, Longitude: -80.3476    









 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 31 Mar 2025