Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Bealls Mills (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Bealls Mills. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Name Variations for Bealls Mills ...
When searching records, keep in mind that names and their spelling can change over time. Our sources include documents like maps, railroad schedules, Travel, Express and Shipping Guides. Many of these documents date from the 1800's and it's common to find spelling differences.
Although we can't give a definitive list, hopefully the following will give you a feel for the variations that might have occurred.
- A typical abbreviation for Bealls Mills: Bealls Mls. (or less commonly used: Bealls Mlls.)
- While the name of this community is Bealls Mills, be aware that it's the common practice of mapmakers to remove the apostrophe from possessive names<1>. So Bealls Mills may originally have been Beall's Mills.
Sometimes the trailing 's' might be dropped altogether, in which case Bealls Mills might be written as Beall Mills.
If you have information about these names (such as the reason for the change, date of change, the origin of the name), please Contact Us.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Bealls Mills is located in Lewis County.
To see how the shape of West Virginia's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Lewis County: Braxton, Doddridge, Gilmer, Harrison, Upshur & Webster.
Below are the counties that are near Bealls Mills. For each of these counties, we show a sample of those communities that are closest to Bealls Mills:
- Lewis County (The home county of Bealls Mills)
- The following are listed by their distance from Bealls Mills, with the one closest to Bealls Mills listed first.
- Alum Bridge
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for Alum Bridge
- Alum Bridge is located in Lewis County
- Camden
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for Camden
- Camden is located in Lewis County
- Alkires Mills
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Alkires Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alkires Mills
- Alkires Mills is located in Lewis County
- Cox Town
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Cox Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cox Town
- Cox Town is located in Lewis County
- Hurst
(8 miles [12.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Hurst. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hurst
- Hurst is located in Lewis County
- Smith Village
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Smith Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smith Village
- Smith Village is located in Lewis County
- Weston
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Weston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weston
- Weston is located in Lewis County
- Population from the 2020 Census: 3,797 people
- Jump to TripAdvisor's Tourism page for Weston <4>
- Garton Village
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Garton Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garton Village
- Garton Village is located in Lewis County
- Valley Chapel
(11 miles [17.7 km] to the northeast)
- Crawford
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Crawford
- Crawford is located in Lewis County
- Westfield
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Westfield
- Westfield is located in Lewis County
- Lightburn
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Lightburn. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lightburn
- Lightburn is located in Lewis County
- Barbour County
- The following are listed by their distance from Bealls Mills, with the one closest to Bealls Mills listed first.
- Pepper
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Pepper. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Pepper
- Pepper is located in Barbour County
- Audra
(29 miles [46.7 km] to the east)
- Jump to our Gazetteer entry for Audra
- Audra is located in Barbour County
- Elk City
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Elk City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elk City
- Elk City is located in Barbour County
- Tygart Junction
(30 miles [48.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Tygart Junction. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tygart Junction
- Tygart Junction is located in Barbour County
- Braxton County
- The following are listed by their distance from Bealls Mills, with the one closest to Bealls Mills listed first.
- Orlando
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for Orlando
- Orlando is located in Braxton County
- Burnsville
(8 miles [12.9 km] to the south)
- Knawl
(10 miles [16.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Knawl. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Knawl
- Knawl is located in Braxton County
- Bulltown
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Bulltown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bulltown
- Bulltown is located in Braxton County
- Napier
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Napier
- Napier is located in Braxton County
- Rollyson
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Rollyson. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Rollyson
- Rollyson is located in Braxton County
- Arnett
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for Arnett
- Arnett is located in Braxton County
- Falls Mill
(13 miles [20.9 km] to the south)
- Jump to our Gazetteer entry for Falls Mill
- Falls Mill is located in Braxton County
- Heaters
(14 miles [22.5 km] to the south)
- Corley
(15 miles [24.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Corley. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Corley
- Corley is located in Braxton County
- Exchange
(15 miles [24.1 km] to the southwest)
- Lloydsville
(16 miles [25.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Lloydsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lloydsville
- Lloydsville is located in Braxton County
- Calhoun County
- The following are listed by their distance from Bealls Mills, with the one closest to Bealls Mills listed first.
- Russet
(24 miles [38.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Russet. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Russet
- Russet is located in Calhoun County
- Staten
(24 miles [38.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Staten. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Staten
- Staten is located in Calhoun County
- Grantsville
(26 miles [41.8 km] to the west)
- Freed
(28 miles [45.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Freed. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Freed
- Freed is located in Calhoun County
- Gomez ‑ Historic
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Gomez have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gomez
- Gomez is located in Calhoun County
- Bigbend
(29 miles [46.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Bigbend. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bigbend
- Bigbend is located in Calhoun County
- Arnoldsburg
(30 miles [48.3 km] to the southwest)
- Jump to our Gazetteer entry for Arnoldsburg
- Arnoldsburg is located in Calhoun County
- Orma
(30 miles [48.3 km] to the southwest)
- Jump to our Gazetteer entry for Orma
- Orma is located in Calhoun County
- Walnut
(30 miles [48.3 km] to the southwest)
- Jump to our Gazetteer entry for Walnut
- Walnut is located in Calhoun County
- Hur
(30 miles [48.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hur. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hur
- Hur is located in Calhoun County
- Doddridge County
- The following are listed by their distance from Bealls Mills, with the one closest to Bealls Mills listed first.
- Saint Clara
(11 miles [17.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Saint Clara. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Saint Clara
- Saint Clara is located in Doddridge County
- Coldwater
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Coldwater. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Coldwater
- Coldwater is located in Doddridge County
- Avon
(15 miles [24.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Avon. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Avon
- Avon is located in Doddridge County
- Grove
(15 miles [24.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Grove. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Grove
- Grove is located in Doddridge County
- Big Isaac
(16 miles [25.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Big Isaac. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Big Isaac
- Big Isaac is located in Doddridge County
- Market
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Market. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Market
- Market is located in Doddridge County
- New Milton
(18 miles [29 km] to the north)
- Smithburg
(23 miles [37 km] to the north)
- Jump to our Gazetteer entry for Smithburg
- Smithburg is located in Doddridge County
- Doak
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Doak. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Doak
- Doak is located in Doddridge County
- West Union
(24 miles [38.6 km] to the north)
- Duckworth
(25 miles [40.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Duckworth. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Duckworth
- Duckworth is located in Doddridge County
- Roberts
(28 miles [45.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Roberts. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Roberts
- Roberts is located in Doddridge County
- Gilmer County
- The following are listed by their distance from Bealls Mills, with the one closest to Bealls Mills listed first.
- Baldwin
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for Baldwin
- Baldwin is located in Gilmer County
- Troy
(8 miles [12.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Troy. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Troy
- Troy is located in Gilmer County
- Sand Fork
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Sand Fork. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sand Fork
- Sand Fork is located in Gilmer County
- Population from the 2020 Census: 145 people
- Truebada
(9 miles [14.5 km] to the west)
- Jump to our Gazetteer entry for Truebada
- Truebada is located in Gilmer County
- Conings
(11 miles [17.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Conings. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Conings
- Conings is located in Gilmer County
- Alice
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Alice
- Alice is located in Gilmer County
- Glenville
(12 miles [19.3 km] to the west)
- Cedarville
(14 miles [22.5 km] to the southwest)
- Jump to our Gazetteer entry for Cedarville
- Cedarville is located in Gilmer County
- Newberne
(16 miles [25.7 km] to the west)
- Jump to our Gazetteer entry for Newberne
- Newberne is located in Gilmer County
- De Kalb
(17 miles [27.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for De Kalb. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for De Kalb
- De Kalb is located in Gilmer County
- Normantown
(19 miles [30.6 km] to the southwest)
- Stumptown
(22 miles [35.4 km] to the west)
- Jump to our Gazetteer entry for Stumptown
- Stumptown is located in Gilmer County
- Harrison County
- The following are listed by their distance from Bealls Mills, with the one closest to Bealls Mills listed first.
- McWhorter
(16 miles [25.7 km] to the northeast)
- Jump to our Gazetteer entry for McWhorter
- McWhorter is located in Harrison County
- Tichenal
(16 miles [25.7 km] to the northeast)
- Jump to our Gazetteer entry for Tichenal
- Tichenal is located in Harrison County
- Lost Creek
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Lost Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lost Creek
- Lost Creek is located in Harrison County
- Population from the 2020 Census: 462 people
- West Milford
(19 miles [30.6 km] to the northeast)
- Jump to our Gazetteer entry for West Milford
- West Milford is located in Harrison County
- Population from the 2020 Census: 609 people
- Salem
(21 miles [33.8 km] to the north)
- Bristol
(22 miles [35.4 km] to the north)
- Craigmoor
(23 miles [37 km] to the northeast)
- Jump to our Gazetteer entry for Craigmoor
- Craigmoor is located in Harrison County
- O'Neill
(24 miles [38.6 km] to the northeast)
- Jump to our Gazetteer entry for O'Neill
- O'Neill is located in Harrison County
- Quiet Dell
(24 miles [38.6 km] to the northeast)
- Jump to our Gazetteer entry for Quiet Dell
- Quiet Dell is located in Harrison County
- Reynoldsville
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Reynoldsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Reynoldsville
- Reynoldsville is located in Harrison County
- Clarksburg
(25 miles [40.2 km] to the northeast)
- Nutter Fort
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Nutter Fort have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nutter Fort
- Nutter Fort is located in Harrison County
- Population from the 2020 Census: 1,501 people
- Randolph County
- The following are listed by their distance from Bealls Mills, with the one closest to Bealls Mills listed first.
- Midvale
(28 miles [45.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Midvale. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Midvale
- Midvale is located in Randolph County
- Helvetia
(28 miles [45.1 km] to the southeast)
- Florence ‑ Historic
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Florence
- Florence is located in Randolph County
- Pickens
(30 miles [48.3 km] to the southeast)
- Ritchie County
- The following are listed by their distance from Bealls Mills, with the one closest to Bealls Mills listed first.
- Auburn
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Auburn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Auburn
- Auburn is located in Ritchie County
- Population from the 2020 Census: 88 people
- Berea
(20 miles [32.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Berea. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Berea
- Berea is located in Ritchie County
- Burnt House
(20 miles [32.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Burnt House. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Burnt House
- Burnt House is located in Ritchie County
- Slab
(22 miles [35.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Slab. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Slab
- Slab is located in Ritchie County
- Pullman
(23 miles [37 km] to the northwest)
- Jump to our Gazetteer entry for Pullman
- Pullman is located in Ritchie County
- Population from the 2020 Census: 135 people
- Toll Gate
(26 miles [41.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Toll Gate. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Toll Gate
- Toll Gate is located in Ritchie County
- Smithville
(27 miles [43.5 km] to the west)
- Jump to our Gazetteer entry for Smithville
- Smithville is located in Ritchie County
- Hannahdale
(28 miles [45.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Hannahdale. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hannahdale
- Hannahdale is located in Ritchie County
- Harrisville
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Harrisville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harrisville
- Harrisville is located in Ritchie County
- Population from the 2020 Census: 1,664 people
- Jump to TripAdvisor's Tourism page for Harrisville <4>
- Stanley
(28 miles [45.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Stanley. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Stanley
- Stanley is located in Ritchie County
- Cokeleys
(29 miles [46.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Cokeleys. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cokeleys
- Cokeleys is located in Ritchie County
- Pennsboro
(29 miles [46.7 km] to the northwest)
- Upshur County
- The following are listed by their distance from Bealls Mills, with the one closest to Bealls Mills listed first.
- Abbott
(15 miles [24.1 km] to the east)
- Jump to our Gazetteer entry for Abbott
- Abbott is located in Upshur County
- Frenchton
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Frenchton
- Frenchton is located in Upshur County
- Hoover Town
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Hoover Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hoover Town
- Hoover Town is located in Upshur County
- Rock Cave
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for Rock Cave
- Rock Cave is located in Upshur County
- Wilsontown
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for Wilsontown
- Wilsontown is located in Upshur County
- Adrian
(18 miles [29 km] to the east)
- Jump to our Gazetteer entry for Adrian
- Adrian is located in Upshur County
- Kanawha Head
(19 miles [30.6 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Kanawha Head. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Kanawha Head
- Kanawha Head is located in Upshur County
- Buckhannon
(20 miles [32.2 km] to the east)
- Sago
(20 miles [32.2 km] to the east)
- Jump to our Gazetteer entry for Sago
- Sago is located in Upshur County
- Reger
(22 miles [35.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Reger. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Reger
- Reger is located in Upshur County
- Sellers ‑ Historic
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Sellers have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sellers
- Sellers is located in Upshur County
- Alton
(23 miles [37 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Alton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Alton
- Alton is located in Upshur County
- Webster County
- The following are listed by their distance from Bealls Mills, with the one closest to Bealls Mills listed first.
- Cleveland
(20 miles [32.2 km] to the southeast)
- Replete
(20 miles [32.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Replete. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Replete
- Replete is located in Webster County
- Hacker Valley
(24 miles [38.6 km] to the southeast)
- Big Run
(26 miles [41.8 km] to the south)
- Jump to our Gazetteer entry for Big Run
- Big Run is located in Webster County
For an expanded list of the communities that are closest to Bealls Mills, see our County-by-County Page for Bealls Mills.
Cemeteries Near Bealls Mills ...
Below are cemeteries that are in the vicinity of Bealls Mills.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Bealls Mills covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Bealls Mills, with the one closest to Bealls Mills listed first.
- St. Bernard Cemetery
(Less than 2 miles to the northeast)
- Jump to our Gazetteer entry for the St. Bernard Cemetery
- Note: The GPS coordinates that we are using for the St. Bernard Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Boilon Cemetery
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for the Boilon Cemetery
- Note: The GPS coordinates that we are using for the Boilon Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Old Field Fork Cemetery
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for the Old Field Fork Cemetery
- Note: The GPS coordinates that we are using for the Old Field Fork Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Keith Cemetery
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Keith Cemetery
- Note: The GPS coordinates that we are using for the Keith Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Rogers Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Rogers Cemetery
- Note: The GPS coordinates that we are using for the Rogers Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Tumbling Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Tumbling Cemetery
- Note: The GPS coordinates that we are using for the Tumbling Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Heater Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Heater Cemetery
- To give a relative sense of its location, the Heater Cemetery is located 3 miles [4.8 km]<5> to the southwest of Burnsville.
- The Heater Cemetery has also been known as:
- Heater - Posey Run Cemetery
- Jump to Find-A-Grave: FG ID #2504948 <6>
- Harrison Grove Cemetery
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for the Harrison Grove Cemetery
- Note: The GPS coordinates that we are using for the Harrison Grove Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Messenger Cemetery
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Messenger Cemetery
- Note: The GPS coordinates that we are using for the Messenger Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Dyer Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Dyer Cemetery
- Note: The GPS coordinates that we are using for the Dyer Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Canfield Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Canfield Cemetery
- Note: The GPS coordinates that we are using for the Canfield Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Mick Cemetery
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for the Mick Cemetery
- Note: The GPS coordinates that we are using for the Mick Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Continue List (416 more) ...
- Woofter Cemetery
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for the Woofter Cemetery
- Note: The GPS coordinates that we are using for the Woofter Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Rock Grove Cemetery
(5 miles [8 km] to the northwest)
- Rock Grove Cemetery
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for the Rock Grove Cemetery
- Note: The GPS coordinates that we are using for the Rock Grove Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<7>
The Rand McNally Atlas shows that Bealls Mills had a population of 11 people in 1895 with a post office and no railroad service.
These communities are listed based on their distance from Bealls Mills, with the one closest to Bealls Mills listed first.
- Aspinall
(2 miles [3.2 km] to the south)
- Note: The GPS coordinates that we are using for Aspinall have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aspinall
- Aspinall is located in Lewis County
- Alum Bridge
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for Alum Bridge
- Alum Bridge is located in Lewis County
- Ellis
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Ellis have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellis
- Ellis is located in Gilmer County
- Arnold
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Arnold have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arnold
- Arnold is located in Lewis County
- Roanoke
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Roanoke have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roanoke
- Roanoke is located in Lewis County
- Jump to TripAdvisor's Tourism page for Roanoke <4>
- Camden
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for Camden
- Camden is located in Lewis County
- Vadis
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Vadis have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vadis
- Vadis is located in Lewis County
- Sand Fork
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Sand Fork. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sand Fork
- Sand Fork is located in Gilmer County
- Population from the 2020 Census: 145 people
- Stouts Mills
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Stouts Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stouts Mills
- Stouts Mills is located in Gilmer County
- Hyers
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Hyers have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hyers
- Hyers is located in Braxton County
- Burnsville
(8 miles [12.9 km] to the south)
- Jacksonville
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Jacksonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jacksonville
- Jacksonville is located in Lewis County
- Continue List (15 more) ...
- Alkires Mills
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Alkires Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alkires Mills
- Alkires Mills is located in Lewis County
- Churchville
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Churchville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Churchville
- Churchville is located in Lewis County
- Troy
(8 miles [12.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Troy. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Troy
- Troy is located in Gilmer County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Bealls Mills. See our List of 1890's Communities around Bealls Mills.
Newspapers Published in Bealls Mills ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 29 newspapers that have been published in the area around Bealls Mills.
Although we're unaware of any newspapers that were published in the immediate area of Bealls Mills, there are papers which were published within 12 miles [19.3 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Bealls Mills.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Bealls Mills:
- Websites specific to West Virginia
- Pages specific to Lewis County
- Genealogy information for nearby counties
- Barbour County
- Braxton County
- Calhoun County
- Doddridge County
- Gilmer County
- Harrison County
- Randolph County
- Ritchie County
- Upshur County
- Webster County
- Cemetery Information and Directories for West Virginia
Off-the-Road Links ...
Unfortunately, we don't know of a website for Bealls Mills. If you can help, please contact us through our Feedback Page.
The official website for State of West Virginia: https://www.wv.gov/
Footnotes ...
<1> | It's generally believed that possessive apostrophes are removed to prevent confusion on maps where the apostrophe may be confused with a cartographic symbol. While this is generally true, it's not uncommon to find possessive apostrophes in administrative names (such as towns or counties). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Bealls Mills) to Point B.Our distance measurements begin at a specific point in Bealls Mills. The point we use is located at these GPS coordinates - Latitude: 38.9684, Longitude: -80.6112 In this case, the coordinates for Bealls Mills have been provided by the Geographic Names Information System (GNIS). |
<6> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<7> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Bealls Mills, please let us know so that we can improve our accuracy. |