Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Ostrander had a post office and railroad service.
The following communities are listed based on their distance from Ostrander, with the one closest to Ostrander listed first.
- Royalton
(Less than 2 miles to the northwest)
- Royalton is located in Waupaca County
- Jump to our Gazetteer entry for Royalton
- Northport
(2 miles [3.2 km] to the northeast)
- Northport is located in Waupaca County
- Jump to our Gazetteer entry for Northport
- Little Wolf ‑ Historic
(3 miles [4.8 km] to the northwest)
- New London
(4 miles [6.4 km] to the east)
- New London is located in Waupaca County
- Jump to our Gazetteer entry for New London
- Population from the 2020 Census: 7,065 people
- Gills Landing
(6 miles [9.7 km] to the south)
- Nowell ‑ Historic
(6 miles [9.7 km] to the north)
- Nowell is located in Waupaca County
- Jump to our Gazetteer entry for Nowell
- Manawa
(6 miles [9.7 km] to the northwest)
- Manawa is located in Waupaca County
- Jump to our Gazetteer entry for Manawa
- Population from the 2020 Census: 1,269 people
- Baldwins Mill
(6 miles [9.7 km] to the west)
- Sugar Bush
(7 miles [11.3 km] to the northeast)
- Sugar Bush is located in Outagamie County
- Jump to our Gazetteer entry for Sugar Bush
- Readfield
(8 miles [12.9 km] to the southeast)
- Readfield is located in Waupaca County
- Jump to our Gazetteer entry for Readfield
- Symco
(8 miles [12.9 km] to the north)
- Symco is located in Waupaca County
- Jump to our Gazetteer entry for Symco
- Fremont
(9 miles [14.5 km] to the south)
- Nicholson
(9 miles [14.5 km] to the north)
- Nicholson is located in Waupaca County
- Jump to our Gazetteer entry for Nicholson
- Hortonville
(10 miles [16.1 km] to the east)
- Bear Creek
(10 miles [16.1 km] to the northeast)
- Bear Creek is located in Outagamie County
- Jump to our Gazetteer entry for Bear Creek
- Population from the 2020 Census: 439 people
- Ogdensburg
(10 miles [16.1 km] to the northwest)
- Ogdensburg is located in Waupaca County
- Jump to our Gazetteer entry for Ogdensburg
- Population from the 2020 Census: 175 people
- Hatton ‑ Historic
(11 miles [17.7 km] to the southwest)
- Hatton is located in Waupaca County
- Jump to our Gazetteer entry for Hatton
- Dale
(11 miles [17.7 km] to the southeast)
- Dale is located in Outagamie County
- Jump to our Gazetteer entry for Dale
- Marble ‑ Historic
(11 miles [17.7 km] to the north)
- Marble is located in Waupaca County
- Jump to our Gazetteer entry for Marble
- Waupaca
(12 miles [19.3 km] to the west)
- Waupaca is located in Waupaca County
- Jump to our Gazetteer entry for Waupaca
- Population from the 2020 Census: 5,857 people
- Orihula
(12 miles [19.3 km] to the south)
- Zittau
(12 miles [19.3 km] to the south)
- Medina
(12 miles [19.3 km] to the southeast)
- Stephensville
(12 miles [19.3 km] to the east)
- Stephensville is located in Outagamie County
- Jump to our Gazetteer entry for Stephensville
- West Bloomfield
(13 miles [20.9 km] to the southwest)
- Shiocton
(13 miles [20.9 km] to the east)
- Shiocton is located in Outagamie County
- Jump to our Gazetteer entry for Shiocton
- Population from the 2020 Census: 914 people
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Ostrander, please let us know so that we can improve our accuracy. |