|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Calvary Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Calvary Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Calvary Cemetery (FG ID #87675). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Calvary Cemetery. We've listed the following communities based on their distance, with the closest first.
- Marinette
(Less than 2 miles to the north)
- Menominee
(2 miles [3.2 km] to the north)
- Kew
(5 miles [8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Kew. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Kew
- Kew is located in Menominee County (MI)
- Google driving directions:
- From your current location to Kew
- From the Calvary Cemetery to Kew
- Peshtigo
(6 miles [9.7 km] to the west)
- Rubys Corner
(8 miles [12.9 km] to the northwest)
- Harmony
(9 miles [14.5 km] to the west)
- Carbondale
(14 miles [22.5 km] to the north)
- Little Sturgeon
(16 miles [25.7 km] to the south)
- Idlewild
(16 miles [25.7 km] to the southeast)
- Egg Harbor
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Egg Harbor have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Egg Harbor
- Egg Harbor is located in Door County
- Population from the 2020 Census: 202 people
- Oconto
(17 miles [27.4 km] to the southwest)
- Wallace
(17 miles [27.4 km] to the north)
- Arthur Bay
(18 miles [29 km] to the northeast)
- Fish Creek
(19 miles [30.6 km] to the east)
- Pound
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Pound have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pound
- Pound is located in Marinette County
- Population from the 2020 Census: 358 people
- Coleman
(19 miles [30.6 km] to the west)
- Sturgeon Bay
(20 miles [32.2 km] to the southeast)
- Ingalls
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Ingalls have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ingalls
- Ingalls is located in Menominee County (MI)
- Crivitz
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Crivitz have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crivitz
- Crivitz is located in Marinette County
- Population from the 2020 Census: 938 people
- Lena
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Lena have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lena
- Lena is located in Oconto County
- Population from the 2020 Census: 540 people
- Pensaukee
(22 miles [35.4 km] to the southwest)
- Jacksonport
(22 miles [35.4 km] to the east)
- Koss
(22 miles [35.4 km] to the north)
- Longrie
(23 miles [37 km] to the north)
- Namur
(23 miles [37 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Namur. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Namur
- Namur is located in Door County
- Google driving directions:
- From your current location to Namur
- From the Calvary Cemetery to Namur
- Brussels
(23 miles [37 km] to the south)
- Ephraim
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Ephraim have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ephraim
- Ephraim is located in Door County
- Population from the 2020 Census: 283 people
- Stephenson
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Stephenson have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stephenson
- Stephenson is located in Menominee County (MI)
- Population from the 2020 Census: 818 people
- Jump to TripAdvisor's Tourism page for Stephenson <3>
- Sweetheart City
(23 miles [37 km] to the northwest)
Off-the-Road Links ...
The official website for Marinette County: www.marinettecounty.com/ The official website for State of Wisconsin: https://www.wisconsin.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Calvary Cemetery. The point we use is located at these GPS coordinates - Latitude: 45.0746, Longitude: -87.6299 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|