RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Travis County >> Volente >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Volente (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Volente. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Volente is located in Travis County.

To see how the shape of Texas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Travis County: Bastrop, Blanco, Burnet, Caldwell, Hays & Williamson.

Below are the counties that are near Volente. For each of these counties, we show a sample of those communities that are closest to Volente:

  • Travis County     (The home county of Volente)
    • The following are listed by their distance from Volente, with the one closest to Volente listed first.
    • Jonestown
      (2 miles [3.2 km] to the north)
      • Note: The GPS coordinates that we are using for Jonestown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jonestown
      • Jonestown is located in Travis County
      • Population from the 2020 Census: 2,169 people
      • Jump to TripAdvisor's Tourism page for Jonestown <2>
    • Hudson Bend
      (2 miles [3.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Hudson Bend have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hudson Bend
      • Hudson Bend is located in Travis County
    • Lago Vista
      (4 miles [6.4 km] to the west)
    • Nameless ‑ Historic
      (5 miles [8 km] to the north)
      • Jump to our Gazetteer entry for Nameless
      • Nameless is located in Travis County
      • Nameless has also been known as:
      • Cross Creek
      • Fairview
    • Buffalo Gap
      (5 miles [8 km] to the southwest)
    • Lakeway
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lakeway have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lakeway
      • Lakeway is located in Travis County
      • Population from the 2020 Census: 16,216 people
      • Jump to TripAdvisor's Tourism page for Lakeway <2>
    • Point Venture
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Point Venture have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Point Venture
      • Point Venture is located in Travis County
      • Population from the 2020 Census: 1,053 people
      • Point Venture has also been known as:
      • Point Venture village
      • Jump to TripAdvisor's Tourism page for Point Venture <2>
    • The Hills
      (8 miles [12.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for The Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for The Hills
      • The Hills is located in Travis County
      • Population from the 2020 Census: 2,456 people
    • Briarcliff
      (8 miles [12.9 km] to the west)
    • Bee Cave
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Bee Cave have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bee Cave
      • Bee Cave is located in Travis County
      • Population from the 2020 Census: 6,983 people
      • Jump to TripAdvisor's Tourism page for Bee Cave <2>
    • Barton Creek
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Barton Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Barton Creek
      • Barton Creek is located in Travis County
    • Lost Creek
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Lost Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lost Creek
      • Lost Creek is located in Travis County
  • Bastrop County
    • Mustang Ridge
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mustang Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mustang Ridge
      • Mustang Ridge is located in Bastrop County
      • Population from the 2020 Census: 1,001 people
  • Blanco County
    • The following are listed by their distance from Volente, with the one closest to Volente listed first.
    • Cypress Mill
      (20 miles [32.2 km] to the west)
    • Round Mountain
      (26 miles [41.8 km] to the west)
  • Burnet County
    • The following are listed by their distance from Volente, with the one closest to Volente listed first.
    • Spicewood
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for Spicewood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spicewood
      • Spicewood is located in Burnet County
      • Jump to TripAdvisor's Tourism page for Spicewood <2>
    • Oatmeal
      (20 miles [32.2 km] to the northwest)
    • Bertram
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Bertram have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bertram
      • Bertram is located in Burnet County
      • Population from the 2020 Census: 1,520 people
      • Jump to TripAdvisor's Tourism page for Bertram <2>
    • Marble Falls
      (23 miles [37 km] to the northwest)
    • Mormon Mill ‑ Historic
      (23 miles [37 km] to the northwest)
      • Jump to our Gazetteer entry for Mormon Mill
      • Mormon Mill is located in Burnet County
      • Mormon Mill has also been known as:
      • Mormon Colony
    • Meadowlakes
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Meadowlakes have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Meadowlakes
      • Meadowlakes is located in Burnet County
      • Population from the 2020 Census: 1,733 people
    • Cottonwood Shores
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Cottonwood Shores have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cottonwood Shores
      • Cottonwood Shores is located in Burnet County
      • Population from the 2020 Census: 1,313 people
      • Jump to TripAdvisor's Tourism page for Cottonwood Shores <2>
    • Burnet
      (28 miles [45.1 km] to the northwest)
    • Horseshoe Bay
      (28 miles [45.1 km] to the west)
    • Granite Shoals
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Granite Shoals have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Granite Shoals
      • Granite Shoals is located in Burnet County
      • Population from the 2020 Census: 5,162 people
      • Jump to TripAdvisor's Tourism page for Granite Shoals <2>
    • Briggs
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Briggs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Briggs
      • Briggs is located in Burnet County
      • Jump to TripAdvisor's Tourism page for Briggs <2>
  • Hays County
    • The following are listed by their distance from Volente, with the one closest to Volente listed first.
    • Fitzhugh
      (15 miles [24.1 km] to the southwest)
      • Jump to our Gazetteer entry for Fitzhugh
      • Fitzhugh is located in Hays County
    • Bear Creek
      (18 miles [29 km] to the south)
      • Note: The GPS coordinates that we are using for Bear Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bear Creek
      • Bear Creek is located in Hays County
      • Estimated population in 2017: 445 people
    • Dripping Springs
      (20 miles [32.2 km] to the southwest)
    • Hays
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Hays have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hays
      • Hays is located in Hays County
      • Population from the 2020 Census: 283 people
    • Driftwood
      (23 miles [37 km] to the south)
    • Mount Gainor
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Mount Gainor have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Gainor
      • Mount Gainor is located in Hays County
    • Buda
      (25 miles [40.2 km] to the south)
      • Jump to our Gazetteer entry for Buda
      • Buda is located in Hays County
      • Population from the 2020 Census: 17,544 people
      • Jump to TripAdvisor's Tourism page for Buda <2>
    • Henly
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Henly have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Henly
      • Henly is located in Hays County
    • Hays City
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Hays City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hays City
      • Hays City is located in Hays County
    • Mountain City
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Mountain City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mountain City
      • Mountain City is located in Hays County
      • Population from the 2020 Census: 858 people
    • Goforth
      (29 miles [46.7 km] to the south)
      • Jump to our Gazetteer entry for Goforth
      • Goforth is located in Hays County
    • Kyle
      (30 miles [48.3 km] to the south)
      • Jump to our Gazetteer entry for Kyle
      • Kyle is located in Hays County
      • Population from the 2020 Census: 51,558 people
      • Jump to TripAdvisor's Tourism page for Kyle <2>
  • Williamson County
    • The following are listed by their distance from Volente, with the one closest to Volente listed first.
    • Anderson Mill
      (6 miles [9.7 km] to the east)
      • Note: The GPS coordinates that we are using for Anderson Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Anderson Mill
      • Anderson Mill is located in Williamson County
    • Jollyville
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Jollyville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jollyville
      • Jollyville is located in Williamson County
    • Cedar Park
      (7 miles [11.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Cedar Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cedar Park
      • Cedar Park is located in Williamson County
      • Population from the 2020 Census: 81,040 people
      • Jump to TripAdvisor's Tourism page for Cedar Park <2>
    • Leander
      (8 miles [12.9 km] to the north)
      • Note: The GPS coordinates that we are using for Leander have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Leander
      • Leander is located in Williamson County
      • Population from the 2020 Census: 70,519 people
      • Jump to TripAdvisor's Tourism page for Leander <2>
    • Brushy Creek
      (11 miles [17.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Brushy Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brushy Creek
      • Brushy Creek is located in Williamson County
    • Round Rock
      (14 miles [22.5 km] to the east)
    • Liberty Hill
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Liberty Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Liberty Hill
      • Liberty Hill is located in Williamson County
      • Population from the 2020 Census: 3,549 people
      • Jump to TripAdvisor's Tourism page for Liberty Hill <2>
    • Georgetown
      (19 miles [30.6 km] to the northeast)
    • Serenada
      (21 miles [33.8 km] to the northeast)
      • Jump to our Gazetteer entry for Serenada
      • Serenada is located in Williamson County
    • Sun City
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Sun City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sun City
      • Sun City is located in Williamson County
    • Hutto
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Hutto have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hutto
      • Hutto is located in Williamson County
      • Population from the 2020 Census: 29,987 people
      • Jump to TripAdvisor's Tourism page for Hutto <2>
    • Andice
      (23 miles [37 km] to the north)

For an expanded list of the communities that are closest to Volente, see our County-by-County Page for Volente.

Newspapers Published in Volente ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 329 newspapers that have been published in the area around Volente.

Although we're unaware of any newspapers that were published in the immediate area of Volente, there are papers which were published within 30 miles [48.3 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Volente.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Volente:

Cemeteries Near Volente ...

Below are cemeteries that are in the vicinity of Volente.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Volente covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Volente, with the one closest to Volente listed first.

  • Simpson Cemetery
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Simpson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Simpson Cemetery
  • Teck Cemetery
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Teck Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Teck Cemetery
  • Fairview Cemetery
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for the Fairview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Fairview Cemetery
  • Darter Cemetery
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for the Darter Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Darter Cemetery
  • Bonnet Cemetery
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Bonnet Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bonnet Cemetery
  • McNeil Cemetery
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for the McNeil Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the McNeil Cemetery
  • Preece Cemetery
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Preece Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Preece Cemetery
  • Jollyville Cemetery
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for the Jollyville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Jollyville Cemetery
  • Rhodes Cemetery
    (7 miles [11.3 km] to the east)
  • Pond Springs Cemetery
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for the Pond Springs Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Pond Springs Cemetery
  • White Rock Cemetery
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for the White Rock Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the White Rock Cemetery
  • Bagdad Cemetery
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for the Bagdad Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bagdad Cemetery
  • Continue List   (151 more) ...
    • Hensel Cemetery
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for the Hensel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Hensel Cemetery
    • Roberts Cemetery
      (10 miles [16.1 km] to the south)
      • Note: The GPS coordinates that we are using for the Roberts Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Roberts Cemetery
    • Davis Cemetery
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for the Davis Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Davis Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

The Rand McNally Atlas shows that in 1895, Volente had a post office and no railroad service. In 2020, Volente had a population of 589 people.

These communities are listed based on their distance from Volente, with the one closest to Volente listed first.

  • Cedar Park
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Cedar Park have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Park
    • Cedar Park is located in Williamson County
    • Population from the 2020 Census: 81,040 people
    • Jump to TripAdvisor's Tourism page for Cedar Park <2>
  • Leander
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Leander have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leander
    • Leander is located in Williamson County
    • Population from the 2020 Census: 70,519 people
    • Jump to TripAdvisor's Tourism page for Leander <2>
  • McNeil
    (11 miles [17.7 km] to the east)
    • Note: The GPS coordinates that we are using for McNeil have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McNeil
    • McNeil is located in Travis County
  • Oak Hill
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oak Hill
    • Oak Hill is located in Travis County
  • Old Round Rock ‑ Historic
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Old Round Rock have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Old Round Rock
    • Old Round Rock is located in Williamson County
  • Round Rock
    (14 miles [22.5 km] to the east)
  • Cedar Valley
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for Cedar Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Valley
    • Cedar Valley is located in Travis County
  • Austin
    (15 miles [24.1 km] to the southeast)
  • Liberty Hill
    (15 miles [24.1 km] to the north)
    • Note: The GPS coordinates that we are using for Liberty Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Liberty Hill
    • Liberty Hill is located in Williamson County
    • Population from the 2020 Census: 3,549 people
    • Jump to TripAdvisor's Tourism page for Liberty Hill <2>
  • Smithwick
    (16 miles [25.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Smithwick have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Smithwick
    • Smithwick is located in Burnet County
  • Daffan
    (18 miles [29 km] to the southeast)
    • Jump to our Gazetteer entry for Daffan
    • Daffan is located in Travis County
  • Georgetown
    (19 miles [30.6 km] to the northeast)
  • Continue List   (15 more) ...
    • Cypress Mill
      (20 miles [32.2 km] to the west)
    • Dripping Springs
      (20 miles [32.2 km] to the southwest)
    • Manchaca
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Manchaca have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Manchaca
      • Manchaca is located in Travis County
      • Jump to TripAdvisor's Tourism page for Manchaca <2>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Volente. See our List of 1890's Communities around Volente.

Unfortunately, we don't know of a website for Volente. If you can help, please contact us through our Feedback Page.

The official website for Travis County: www.co.travis.tx.us/

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Volente) to Point B.Our distance measurements begin at a specific point in Volente. The point we use is located at these GPS coordinates - Latitude: 30.4453, Longitude: -97.9079       In this case, the coordinates for Volente have been provided by the Geographic Names Information System (GNIS).
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Volente, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024