RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Williamson County >> Liberty Hill >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Texas


The Commemorative Quarter for Texas







Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Liberty Hill (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Liberty Hill. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Liberty Hill is located in Williamson County.

To see how the shape of Texas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Williamson County: Bastrop, Bell, Burnet, Lee, Milam & Travis.

Below are the counties that are near Liberty Hill. For each of these counties, we show a sample of those communities that are closest to Liberty Hill:

  • Williamson County     (The home county of Liberty Hill)
    • The following are listed by their distance from Liberty Hill, with the one closest to Liberty Hill listed first.
    • Leander
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Leander have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Leander
      • Leander is located in Williamson County
      • Population from the 2020 Census: 70,519 people
      • Jump to TripAdvisor's Tourism page for Leander <2>
    • Andice
      (8 miles [12.9 km] to the northeast)
    • Sun City
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Sun City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sun City
      • Sun City is located in Williamson County
    • Cedar Park
      (12 miles [19.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cedar Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cedar Park
      • Cedar Park is located in Williamson County
      • Population from the 2020 Census: 81,040 people
      • Jump to TripAdvisor's Tourism page for Cedar Park <2>
    • Serenada
      (13 miles [20.9 km] to the east)
      • Jump to our Gazetteer entry for Serenada
      • Serenada is located in Williamson County
    • Georgetown
      (14 miles [22.5 km] to the east)
    • Florence
      (14 miles [22.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Florence
      • Florence is located in Williamson County
      • Population from the 2020 Census: 1,304 people
      • Jump to TripAdvisor's Tourism page for Florence <2>
    • Brushy Creek
      (14 miles [22.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Brushy Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brushy Creek
      • Brushy Creek is located in Williamson County
    • Anderson Mill
      (16 miles [25.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Anderson Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Anderson Mill
      • Anderson Mill is located in Williamson County
    • Jollyville
      (17 miles [27.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Jollyville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jollyville
      • Jollyville is located in Williamson County
    • Round Rock
      (17 miles [27.4 km] to the southeast)
    • Weir
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Weir have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Weir
      • Weir is located in Williamson County
      • Population from the 2020 Census: 549 people
      • Jump to TripAdvisor's Tourism page for Weir <2>
  • Bell County
    • The following are listed by their distance from Liberty Hill, with the one closest to Liberty Hill listed first.
    • Maxdale ‑ Historic
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Maxdale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maxdale
      • Maxdale is located in Bell County
    • Ding Dong
      (23 miles [37 km] to the north)
      • Jump to our Gazetteer entry for Ding Dong
      • Ding Dong is located in Bell County
    • Bartlett
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Bartlett have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bartlett
      • Bartlett is located in Bell County
      • Population from the 2020 Census: 1,766 people
      • Jump to TripAdvisor's Tourism page for Bartlett <2>
    • Killeen
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Killeen have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Killeen
      • Killeen is located in Bell County
      • Population from the 2020 Census: 153,991 people
      • Jump to TripAdvisor's Tourism page for Killeen <2>
    • Salado
      (30 miles [48.3 km] to the northeast)
  • Blanco County
    • The following are listed by their distance from Liberty Hill, with the one closest to Liberty Hill listed first.
    • Cypress Mill
      (27 miles [43.5 km] to the southwest)
    • Round Mountain
      (30 miles [48.3 km] to the southwest)
  • Burnet County
    • The following are listed by their distance from Liberty Hill, with the one closest to Liberty Hill listed first.
    • Bertram
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Bertram have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bertram
      • Bertram is located in Burnet County
      • Population from the 2020 Census: 1,520 people
      • Jump to TripAdvisor's Tourism page for Bertram <2>
    • Oatmeal
      (10 miles [16.1 km] to the west)
    • Briggs
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Briggs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Briggs
      • Briggs is located in Burnet County
      • Jump to TripAdvisor's Tourism page for Briggs <2>
    • Mormon Mill ‑ Historic
      (18 miles [29 km] to the west)
      • Jump to our Gazetteer entry for Mormon Mill
      • Mormon Mill is located in Burnet County
      • Mormon Mill has also been known as:
      • Mormon Colony
    • Spicewood
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Spicewood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spicewood
      • Spicewood is located in Burnet County
      • Jump to TripAdvisor's Tourism page for Spicewood <2>
    • Burnet
      (19 miles [30.6 km] to the west)
    • Marble Falls
      (21 miles [33.8 km] to the west)
    • Meadowlakes
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Meadowlakes have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Meadowlakes
      • Meadowlakes is located in Burnet County
      • Population from the 2020 Census: 1,733 people
    • Cottonwood Shores
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Cottonwood Shores have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cottonwood Shores
      • Cottonwood Shores is located in Burnet County
      • Population from the 2020 Census: 1,313 people
      • Jump to TripAdvisor's Tourism page for Cottonwood Shores <2>
    • Granite Shoals
      (28 miles [45.1 km] to the west)
      • Note: The GPS coordinates that we are using for Granite Shoals have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Granite Shoals
      • Granite Shoals is located in Burnet County
      • Population from the 2020 Census: 5,162 people
      • Jump to TripAdvisor's Tourism page for Granite Shoals <2>
    • Highland Haven
      (28 miles [45.1 km] to the west)
      • Note: The GPS coordinates that we are using for Highland Haven have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Highland Haven
      • Highland Haven is located in Burnet County
      • Population from the 2020 Census: 445 people
    • Horseshoe Bay
      (28 miles [45.1 km] to the west)
  • Hays County
    • Fitzhugh
      (29 miles [46.7 km] to the south)
      • Jump to our Gazetteer entry for Fitzhugh
      • Fitzhugh is located in Hays County
  • Lampasas County
    • The following are listed by their distance from Liberty Hill, with the one closest to Liberty Hill listed first.
    • Kempner
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Kempner have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kempner
      • Kempner is located in Lampasas County
      • Population from the 2020 Census: 1,160 people
      • Jump to TripAdvisor's Tourism page for Kempner <2>
    • Sparks Crossing ‑ Historic
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Sparks Crossing have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sparks Crossing
      • Sparks Crossing is located in Lampasas County
  • Llano County
    • The following are listed by their distance from Liberty Hill, with the one closest to Liberty Hill listed first.
    • Buchanan Dam
      (30 miles [48.3 km] to the west)
    • Sunrise Beach Village
      (30 miles [48.3 km] to the west)
      • Note: The GPS coordinates that we are using for Sunrise Beach Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sunrise Beach Village
      • Sunrise Beach Village is located in Llano County
      • Population from the 2020 Census: 810 people
      • Jump to TripAdvisor's Tourism page for Sunrise Beach Village <2>
  • Travis County
    • The following are listed by their distance from Liberty Hill, with the one closest to Liberty Hill listed first.
    • Nameless ‑ Historic
      (9 miles [14.5 km] to the south)
      • Jump to our Gazetteer entry for Nameless
      • Nameless is located in Travis County
      • Nameless has also been known as:
      • Cross Creek
      • Fairview
    • Jonestown
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Jonestown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jonestown
      • Jonestown is located in Travis County
      • Population from the 2020 Census: 2,169 people
      • Jump to TripAdvisor's Tourism page for Jonestown <2>
    • Lago Vista
      (14 miles [22.5 km] to the south)
    • Volente
      (15 miles [24.1 km] to the south)
      • Note: The GPS coordinates that we are using for Volente have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Volente
      • Volente is located in Travis County
      • Population from the 2020 Census: 589 people
      • Jump to TripAdvisor's Tourism page for Volente <2>
    • Hudson Bend
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Hudson Bend have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hudson Bend
      • Hudson Bend is located in Travis County
    • Buffalo Gap
      (19 miles [30.6 km] to the south)
    • Briarcliff
      (19 miles [30.6 km] to the southwest)
    • Point Venture
      (20 miles [32.2 km] to the south)
      • Note: The GPS coordinates that we are using for Point Venture have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Point Venture
      • Point Venture is located in Travis County
      • Population from the 2020 Census: 1,053 people
      • Point Venture has also been known as:
      • Point Venture village
      • Jump to TripAdvisor's Tourism page for Point Venture <2>
    • Kings Village
      (20 miles [32.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Kings Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kings Village
      • Kings Village is located in Travis County
    • Wells Branch
      (20 miles [32.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Wells Branch have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wells Branch
      • Wells Branch is located in Travis County
    • Lakeway
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Lakeway have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lakeway
      • Lakeway is located in Travis County
      • Population from the 2020 Census: 16,216 people
      • Jump to TripAdvisor's Tourism page for Lakeway <2>
    • Three Points
      (21 miles [33.8 km] to the southeast)
      • Jump to our Gazetteer entry for Three Points
      • Three Points is located in Travis County

For an expanded list of the communities that are closest to Liberty Hill, see our County-by-County Page for Liberty Hill.

Newspapers Published in Liberty Hill ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 305 newspapers that have been published in the area around Liberty Hill.

Although we're unaware of any newspapers that were published in the immediate area of Liberty Hill, there are papers which were published within 30 miles [48.3 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Liberty Hill.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Liberty Hill:

Cemeteries Near Liberty Hill ...

Below are cemeteries that are in the vicinity of Liberty Hill.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Liberty Hill covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Liberty Hill, with the one closest to Liberty Hill listed first.

  • Cementerio de las Tres Marias Cemetery
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for the Cementerio de las Tres Marias Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Cementerio de las Tres Marias Cemetery
  • Liberty Hill Cemetery
    (Less than 2 miles to the west)
  • Miller Cemetery
    (3 miles [4.8 km] to the south)
  • Cedar Grove Cemetery
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Cedar Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Cedar Grove Cemetery
  • Huddleston Cemetery
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for the Huddleston Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Huddleston Cemetery
  • Anderson Cemetery
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Anderson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Anderson Cemetery
  • Buck Cemetery
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for the Buck Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Buck Cemetery
  • Hopewell Cemetery
    (5 miles [8 km] to the west)
  • Wells Cemetery
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Wells Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Wells Cemetery
  • Hunt Cemetery
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for the Hunt Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hunt Cemetery
  • Bagdad Cemetery
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Bagdad Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bagdad Cemetery
  • Upchurch Cemetery
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Upchurch Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Upchurch Cemetery
  • Continue List   (140 more) ...
    • Bullion Cemetery
      (6 miles [9.7 km] to the east)
      • Note: The GPS coordinates that we are using for the Bullion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Bullion Cemetery
    • Fore Cemetery
      (6 miles [9.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for the Fore Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Fore Cemetery
    • South Gabriel Cemetery
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for the South Gabriel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the South Gabriel Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that Liberty Hill had a population of 309 people in 1895 with a post office and railroad service. In 2020, Liberty Hill had a population of 3,549 people.

These communities are listed based on their distance from Liberty Hill, with the one closest to Liberty Hill listed first.

  • Leander
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Leander have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leander
    • Leander is located in Williamson County
    • Population from the 2020 Census: 70,519 people
    • Jump to TripAdvisor's Tourism page for Leander <2>
  • Bertram
    (9 miles [14.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Bertram have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bertram
    • Bertram is located in Burnet County
    • Population from the 2020 Census: 1,520 people
    • Jump to TripAdvisor's Tourism page for Bertram <2>
  • Mahomet
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Mahomet have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mahomet
    • Mahomet is located in Burnet County
  • Cedar Park
    (12 miles [19.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Cedar Park have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Park
    • Cedar Park is located in Williamson County
    • Population from the 2020 Census: 81,040 people
    • Jump to TripAdvisor's Tourism page for Cedar Park <2>
  • Georgetown
    (14 miles [22.5 km] to the east)
  • Florence
    (14 miles [22.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Florence
    • Florence is located in Williamson County
    • Population from the 2020 Census: 1,304 people
    • Jump to TripAdvisor's Tourism page for Florence <2>
  • Smithwick
    (15 miles [24.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Smithwick have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Smithwick
    • Smithwick is located in Burnet County
  • Volente
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for Volente have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Volente
    • Volente is located in Travis County
    • Population from the 2020 Census: 589 people
    • Jump to TripAdvisor's Tourism page for Volente <2>
  • Old Round Rock ‑ Historic
    (17 miles [27.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Old Round Rock have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Old Round Rock
    • Old Round Rock is located in Williamson County
  • Round Rock
    (17 miles [27.4 km] to the southeast)
  • McNeil
    (18 miles [29 km] to the southeast)
    • Note: The GPS coordinates that we are using for McNeil have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McNeil
    • McNeil is located in Travis County
  • Burnet
    (19 miles [30.6 km] to the west)
  • Continue List   (14 more) ...
    • Sudduth
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Sudduth have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sudduth
      • Sudduth is located in Burnet County
    • Walburg
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Walburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walburg
      • Walburg is located in Williamson County
      • Jump to TripAdvisor's Tourism page for Walburg <2>
    • Theon
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Theon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Theon
      • Theon is located in Williamson County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Liberty Hill. See our List of 1890's Communities around Liberty Hill.

Unfortunately, we don't know of a website for Liberty Hill. If you can help, please contact us through our Feedback Page.

The official website for Williamson County: www.wilco.org/

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Liberty Hill) to Point B.Our distance measurements begin at a specific point in Liberty Hill. The point we use is located at these GPS coordinates - Latitude: 30.6663, Longitude: -97.9177       In this case, the coordinates for Liberty Hill have been provided by the Geographic Names Information System (GNIS).
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Liberty Hill, please let us know so that we can improve our accuracy.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024