RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Falls County >> Highbank >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Texas


The Commemorative Quarter for Texas







Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Highbank (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Highbank. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Highbank is located in Falls County.

To see how the shape of Texas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Falls County: Bell, Limestone, McLennan, Milam & Robertson.

Below are the counties that are near Highbank. For each of these counties, we show a sample of those communities that are closest to Highbank:

  • Falls County     (The home county of Highbank)
    • The following are listed by their distance from Highbank, with the one closest to Highbank listed first.
    • Reagan
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Reagan have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Reagan
      • Reagan is located in Falls County
      • Jump to TripAdvisor's Tourism page for Reagan <2>
    • Wilderville
      (5 miles [8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Wilderville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wilderville
      • Wilderville is located in Falls County
    • Marlin
      (10 miles [16.1 km] to the north)
    • Rosebud
      (10 miles [16.1 km] to the southwest)
    • Stranger
      (12 miles [19.3 km] to the northeast)
      • Jump to our Gazetteer entry for Stranger
      • Stranger is located in Falls County
    • Lott
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Lott have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lott
      • Lott is located in Falls County
      • Population from the 2020 Census: 744 people
      • Jump to TripAdvisor's Tourism page for Lott <2>
    • Zipperlandville ‑ Historic
      (14 miles [22.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Zipperlandville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Zipperlandville
      • Zipperlandville is located in Falls County
      • Zipperlandville has also been known as:
      • Zipperlen
      • Zipperlenville
    • Chilton
      (15 miles [24.1 km] to the northwest)
    • Satin
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Satin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Satin
      • Satin is located in Falls County
      • Jump to TripAdvisor's Tourism page for Satin <2>
    • Westphalia
      (16 miles [25.7 km] to the west)
      • Note: The GPS coordinates that we are using for Westphalia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Westphalia
      • Westphalia is located in Falls County
    • Perry
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Perry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Perry
      • Perry is located in Falls County
      • Jump to TripAdvisor's Tourism page for Perry <2>
    • Otto
      (19 miles [30.6 km] to the north)
      • Note: The GPS coordinates that we are using for Otto have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Otto
      • Otto is located in Falls County
      • Jump to TripAdvisor's Tourism page for Otto <2>
    • Golinda
      (19 miles [30.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Golinda have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Golinda
      • Golinda is located in Falls County
      • Population from the 2020 Census: 610 people
  • Bell County
    • The following are listed by their distance from Highbank, with the one closest to Highbank listed first.
    • Ocker
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Ocker have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ocker
      • Ocker is located in Bell County
    • Edgeworth
      (23 miles [37 km] to the southwest)
      • Note: The GPS coordinates that we are using for Edgeworth have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Edgeworth
      • Edgeworth is located in Bell County
    • Troy
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Troy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Troy
      • Troy is located in Bell County
      • Population from the 2020 Census: 2,191 people
      • Jump to TripAdvisor's Tourism page for Troy <2>
    • Rogers
      (28 miles [45.1 km] to the southwest)
    • Heidenheimer
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Heidenheimer have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Heidenheimer
      • Heidenheimer is located in Bell County
      • Jump to TripAdvisor's Tourism page for Heidenheimer <2>
    • Pendleton
      (30 miles [48.3 km] to the west)
      • Note: The GPS coordinates that we are using for Pendleton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pendleton
      • Pendleton is located in Bell County
      • Jump to TripAdvisor's Tourism page for Pendleton <2>
    • Temple
      (30 miles [48.3 km] to the west)
  • Limestone County
    • The following are listed by their distance from Highbank, with the one closest to Highbank listed first.
    • Kosse
      (15 miles [24.1 km] to the northeast)
      • Jump to our Gazetteer entry for Kosse
      • Kosse is located in Limestone County
      • Population from the 2020 Census: 463 people
      • Jump to TripAdvisor's Tourism page for Kosse <2>
    • Thornton
      (22 miles [35.4 km] to the northeast)
    • Groesbeck
      (30 miles [48.3 km] to the northeast)
  • McLennan County
    • The following are listed by their distance from Highbank, with the one closest to Highbank listed first.
    • Riesel
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Riesel have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Riesel
      • Riesel is located in McLennan County
      • Population from the 2020 Census: 1,049 people
      • Jump to TripAdvisor's Tourism page for Riesel <2>
    • Downsville
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Downsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Downsville
      • Downsville is located in McLennan County
    • Rosenthal
      (23 miles [37 km] to the northwest)
      • Jump to our Gazetteer entry for Rosenthal
      • Rosenthal is located in McLennan County
    • Mart
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for Mart have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mart
      • Mart is located in McLennan County
      • Population from the 2020 Census: 1,983 people
      • Jump to TripAdvisor's Tourism page for Mart <2>
    • Bruceville
      (26 miles [41.8 km] to the northwest)
    • Lorena
      (26 miles [41.8 km] to the northwest)
      • Jump to our Gazetteer entry for Lorena
      • Lorena is located in McLennan County
    • Robinson
      (26 miles [41.8 km] to the northwest)
    • Eddy
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Eddy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Eddy
      • Eddy is located in McLennan County
      • Jump to TripAdvisor's Tourism page for Eddy <2>
    • Hallsburg
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Hallsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hallsburg
      • Hallsburg is located in McLennan County
      • Population from the 2020 Census: 454 people
    • Hewitt
      (29 miles [46.7 km] to the northwest)
      • Jump to our Gazetteer entry for Hewitt
      • Hewitt is located in McLennan County
      • Population from the 2020 Census: 15,113 people
      • Jump to TripAdvisor's Tourism page for Hewitt <2>
    • Beverly Hills
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Beverly Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beverly Hills
      • Beverly Hills is located in McLennan County
      • Population from the 2020 Census: 1,980 people
    • East Waco
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for East Waco have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Waco
      • East Waco is located in McLennan County
  • Milam County
    • The following are listed by their distance from Highbank, with the one closest to Highbank listed first.
    • Baileyville
      (8 miles [12.9 km] to the south)
      • Jump to our Gazetteer entry for Baileyville
      • Baileyville is located in Milam County
    • Crossroads
      (14 miles [22.5 km] to the south)
      • Jump to our Gazetteer entry for Crossroads
      • Crossroads is located in Milam County
    • Jones Prairie
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Jones Prairie have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jones Prairie
      • Jones Prairie is located in Milam County
    • Burlington
      (14 miles [22.5 km] to the southwest)
    • Maysfield
      (18 miles [29 km] to the south)
      • Note: The GPS coordinates that we are using for Maysfield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maysfield
      • Maysfield is located in Milam County
      • Jump to TripAdvisor's Tourism page for Maysfield <2>
    • Silver City
      (19 miles [30.6 km] to the south)
      • Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Silver City
      • Silver City is located in Milam County
    • Port Sullivan ‑ Historic
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Port Sullivan have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Port Sullivan
      • Port Sullivan is located in Milam County
    • Marlow
      (22 miles [35.4 km] to the south)
      • Jump to our Gazetteer entry for Marlow
      • Marlow is located in Milam County
    • Cameron
      (23 miles [37 km] to the south)
    • Buckholts
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Buckholts have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Buckholts
      • Buckholts is located in Milam County
      • Population from the 2020 Census: 518 people
      • Jump to TripAdvisor's Tourism page for Buckholts <2>
    • Gause
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Gause have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gause
      • Gause is located in Milam County
      • Jump to TripAdvisor's Tourism page for Gause <2>
    • Minerva
      (29 miles [46.7 km] to the south)
      • Jump to our Gazetteer entry for Minerva
      • Minerva is located in Milam County
  • Robertson County
    • The following are listed by their distance from Highbank, with the one closest to Highbank listed first.
    • Bremond
      (9 miles [14.5 km] to the east)
    • Calvert
      (16 miles [25.7 km] to the southeast)
    • Owensville
      (19 miles [30.6 km] to the east)
      • Jump to our Gazetteer entry for Owensville
      • Owensville is located in Robertson County
    • Elliot
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Elliot have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elliot
      • Elliot is located in Robertson County
    • Franklin
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Franklin
      • Franklin is located in Robertson County
      • Population from the 2020 Census: 1,643 people
      • Jump to TripAdvisor's Tourism page for Franklin <2>
    • Hearne
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Hearne have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hearne
      • Hearne is located in Robertson County
      • Population from the 2020 Census: 4,340 people
      • Jump to TripAdvisor's Tourism page for Hearne <2>
    • New Baden
      (25 miles [40.2 km] to the east)
    • Seale
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Seale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Seale
      • Seale is located in Robertson County
    • Ridge
      (30 miles [48.3 km] to the east)
      • Jump to our Gazetteer entry for Ridge
      • Ridge is located in Robertson County

For an expanded list of the communities that are closest to Highbank, see our County-by-County Page for Highbank.

Newspapers Published in Highbank ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 53 newspapers that have been published in the area around Highbank.

Although we're unaware of any newspapers that were published in the immediate area of Highbank, there are papers which were published within 29 miles [46.7 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Highbank.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Highbank:

Cemeteries Near Highbank ...

Below are cemeteries that are in the vicinity of Highbank.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Highbank covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Highbank, with the one closest to Highbank listed first.

  • Washington Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Washington Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Washington Cemetery
  • Bethany Cemetery
    (Less than 2 miles to the northwest)
    • Note: The GPS coordinates that we are using for the Bethany Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bethany Cemetery
    • Jump to Find-A-Grave: FG ID #2356 <4>
  • Shiloh Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for the Shiloh Cemetery. Although the coordinates have been estimated, they should be in the vicinity.<5>
    • Jump to our Gazetteer entry for the Shiloh Cemetery
    • Jump to Find-A-Grave: FG ID #6882 <4>
  • Ferguson Cemetery
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Ferguson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Ferguson Cemetery
  • Facieo Cemetery
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Facieo Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Facieo Cemetery
  • Old Bowman Cemetery
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for the Old Bowman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Old Bowman Cemetery
  • Waite Cemetery
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Waite Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Waite Cemetery
  • New Bowman Cemetery
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for the New Bowman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the New Bowman Cemetery
  • Powers Cemetery
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Powers Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Powers Cemetery
  • Caddo Cemetery
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for the Caddo Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Caddo Cemetery
  • Macedonia Cemetery
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Macedonia Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Macedonia Cemetery
  • Morning Star Cemetery
    (6 miles [9.7 km] to the south)
  • Continue List   (244 more) ...
    • Bozeman Cemetery
      (6 miles [9.7 km] to the south)
      • Note: The GPS coordinates that we are using for the Bozeman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Bozeman Cemetery
    • Jerusalem Cemetery
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for the Jerusalem Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Jerusalem Cemetery
      • Jump to Find-A-Grave: FG ID #4510 <4>
    • Pearson Cemetery
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for the Pearson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Pearson Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

While we didn't find Highbank in the Atlas, the following 1895 communities would have been found near the current location of Highbank.

These communities are listed based on their distance from Highbank, with the one closest to Highbank listed first.

  • Reagan
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Reagan have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Reagan
    • Reagan is located in Falls County
    • Jump to TripAdvisor's Tourism page for Reagan <2>
  • Wilderville
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Wilderville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wilderville
    • Wilderville is located in Falls County
  • Baileyville
    (8 miles [12.9 km] to the south)
    • Jump to our Gazetteer entry for Baileyville
    • Baileyville is located in Milam County
  • Hammond
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Hammond have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hammond
    • Hammond is located in Robertson County
  • Bremond
    (9 miles [14.5 km] to the east)
  • Travis
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Travis have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Travis
    • Travis is located in Falls County
  • Rosebud
    (10 miles [16.1 km] to the southwest)
  • Marlin
    (10 miles [16.1 km] to the north)
  • Stranger
    (12 miles [19.3 km] to the northeast)
    • Jump to our Gazetteer entry for Stranger
    • Stranger is located in Falls County
  • McClanahan
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for McClanahan have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McClanahan
    • McClanahan is located in Falls County
  • Lott
    (12 miles [19.3 km] to the west)
    • Note: The GPS coordinates that we are using for Lott have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lott
    • Lott is located in Falls County
    • Population from the 2020 Census: 744 people
    • Jump to TripAdvisor's Tourism page for Lott <2>
  • Clarkson
    (13 miles [20.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Clarkson have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clarkson
    • Clarkson is located in Milam County
  • Continue List   (13 more) ...
    • Burlington
      (14 miles [22.5 km] to the southwest)
    • Jones Prairie
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Jones Prairie have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jones Prairie
      • Jones Prairie is located in Milam County
    • Nesbitt
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for Nesbitt have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nesbitt
      • Nesbitt is located in Robertson County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Highbank. See our List of 1890's Communities around Highbank.

Unfortunately, we don't know of a website for Highbank. If you can help, please contact us through our Feedback Page.

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Highbank) to Point B.Our distance measurements begin at a specific point in Highbank. The point we use is located at these GPS coordinates - Latitude: 31.1706, Longitude: -96.8342    
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Highbank, please let us know so that we can improve our accuracy.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024