RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Bell County >> Gober >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Gober (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Gober. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Gober is located in Bell County.

To see how the shape of Texas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Bell County: Burnet, Coryell, Falls, Lampasas, McLennan, Milam & Williamson.

Below are the counties that are near Gober. For each of these counties, we show a sample of those communities that are closest to Gober:

  • Bell County     (The home county of Gober)
    • The following are listed by their distance from Gober, with the one closest to Gober listed first.
    • Temple
      (Less than 2 miles to the east)
    • Pendleton
      (6 miles [9.7 km] to the north)
      • Note: The GPS coordinates that we are using for Pendleton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pendleton
      • Pendleton is located in Bell County
      • Jump to TripAdvisor's Tourism page for Pendleton <1>
    • Morgan's Point Resort
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Morgan's Point Resort have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morgan's Point Resort
      • Morgan's Point Resort is located in Bell County
      • Population from the 2020 Census: 4,785 people
      • Jump to TripAdvisor's Tourism page for Morgan's Point Resort <1>
    • Heidenheimer
      (6 miles [9.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Heidenheimer have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Heidenheimer
      • Heidenheimer is located in Bell County
      • Jump to TripAdvisor's Tourism page for Heidenheimer <1>
    • Belton
      (6 miles [9.7 km] to the southwest)
    • Troy
      (7 miles [11.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Troy have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Troy
      • Troy is located in Bell County
      • Population from the 2020 Census: 2,191 people
      • Jump to TripAdvisor's Tourism page for Troy <1>
    • Little River-Academy
      (7 miles [11.3 km] to the south)
      • Jump to our Gazetteer entry for Little River-Academy
      • Little River-Academy is located in Bell County
      • Population from the 2020 Census: 2,048 people
    • Little River
      (7 miles [11.3 km] to the south)
    • Oenaville
      (8 miles [12.9 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Oenaville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Oenaville
      • Oenaville is located in Bell County
    • Academy
      (8 miles [12.9 km] to the south)
      • Jump to our Gazetteer entry for Academy
      • Academy is located in Bell County
    • Moffat
      (9 miles [14.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Moffat. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Moffat
      • Moffat is located in Bell County
    • Sparks
      (11 miles [17.7 km] to the south)
      • Jump to our Gazetteer entry for Sparks
      • Sparks is located in Bell County
    • Cyclone
      (13 miles [20.9 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Cyclone. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Cyclone
      • Cyclone is located in Bell County
  • Coryell County
    • The following are listed by their distance from Gober, with the one closest to Gober listed first.
    • The Grove
      (15 miles [24.1 km] to the northwest)
      • Jump to our Gazetteer entry for The Grove
      • The Grove is located in Coryell County
    • Flat
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Flat have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Flat
      • Flat is located in Coryell County
      • Jump to TripAdvisor's Tourism page for Flat <1>
    • Leon Junction
      (21 miles [33.8 km] to the northwest)
    • Mason Crossing ‑ Historic
      (21 miles [33.8 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Mason Crossing. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Mason Crossing
      • Mason Crossing is located in Coryell County
    • Lime City
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Lime City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lime City
      • Lime City is located in Coryell County
    • McGregor
      (23 miles [37 km] to the north)
    • Oglesby
      (23 miles [37 km] to the north)
      • Note: The GPS coordinates that we are using for Oglesby have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oglesby
      • Oglesby is located in Coryell County
      • Population from the 2020 Census: 464 people
      • Jump to TripAdvisor's Tourism page for Oglesby <1>
    • Mound
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Mound have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mound
      • Mound is located in Coryell County
      • Jump to TripAdvisor's Tourism page for Mound <1>
    • Comanche Village I
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Comanche Village I have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Comanche Village I
      • Comanche Village I is located in Coryell County
    • Comanche Village II
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Comanche Village II have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Comanche Village II
      • Comanche Village II is located in Coryell County
    • Saint Elijah Village
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Saint Elijah Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Elijah Village
      • Saint Elijah Village is located in Coryell County
    • Comanche Village III
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Comanche Village III have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Comanche Village III
      • Comanche Village III is located in Coryell County
    • Montague Village
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Montague Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Montague Village
      • Montague Village is located in Coryell County
  • Falls County
    • The following are listed by their distance from Gober, with the one closest to Gober listed first.
    • Westphalia
      (15 miles [24.1 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Westphalia. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Westphalia
      • Westphalia is located in Falls County
    • Bruceville - Eddy
      (15 miles [24.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bruceville - Eddy have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bruceville - Eddy
      • Bruceville - Eddy is located in Falls County
      • Population from the 2020 Census: 1,704 people
    • Durango
      (15 miles [24.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Durango. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Durango
      • Durango is located in Falls County
    • Zipperlandville ‑ Historic
      (18 miles [29 km] to the east)
      • Note: The GPS coordinates that we are using for Zipperlandville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Zipperlandville
      • Zipperlandville is located in Falls County
      • Zipperlandville has also been known as:
      • Zipperlen
      • Zipperlenville
    • Mooreville
      (19 miles [30.6 km] to the northeast)
      • Jump to our Gazetteer entry for Mooreville
      • Mooreville is located in Falls County
    • Lott
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Lott have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lott
      • Lott is located in Falls County
      • Population from the 2020 Census: 744 people
      • Jump to TripAdvisor's Tourism page for Lott <1>
    • Chilton
      (22 miles [35.4 km] to the northeast)
    • Rosebud
      (23 miles [37 km] to the east)
    • Golinda
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Golinda have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Golinda
      • Golinda is located in Falls County
      • Population from the 2020 Census: 610 people
    • Satin
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Satin have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Satin
      • Satin is located in Falls County
      • Jump to TripAdvisor's Tourism page for Satin <1>
    • Wilderville
      (28 miles [45.1 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Wilderville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Wilderville
      • Wilderville is located in Falls County
  • McLennan County
    • The following are listed by their distance from Gober, with the one closest to Gober listed first.
    • Moody
      (14 miles [22.5 km] to the north)
      • Jump to our Gazetteer entry for Moody
      • Moody is located in McLennan County
      • Population from the 2020 Census: 1,433 people
      • Jump to TripAdvisor's Tourism page for Moody <1>
    • Eddy
      (15 miles [24.1 km] to the northeast)
    • Bruceville
      (17 miles [27.4 km] to the northeast)
    • Lorena
      (21 miles [33.8 km] to the northeast)
      • Jump to our Gazetteer entry for Lorena
      • Lorena is located in McLennan County
    • Hewitt
      (27 miles [43.5 km] to the north)
      • Jump to our Gazetteer entry for Hewitt
      • Hewitt is located in McLennan County
      • Population from the 2020 Census: 15,113 people
      • Jump to TripAdvisor's Tourism page for Hewitt <1>
    • Rosenthal
      (27 miles [43.5 km] to the northeast)
      • Jump to our Gazetteer entry for Rosenthal
      • Rosenthal is located in McLennan County
    • Woodway
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Woodway have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodway
      • Woodway is located in McLennan County
      • Population from the 2020 Census: 9,077 people
      • Jump to TripAdvisor's Tourism page for Woodway <1>
    • Robinson
      (29 miles [46.7 km] to the northeast)
    • Crawford
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Crawford have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crawford
      • Crawford is located in McLennan County
      • Population from the 2020 Census: 870 people
      • Jump to TripAdvisor's Tourism page for Crawford <1>
    • Downsville
      (30 miles [48.3 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Downsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Downsville
      • Downsville is located in McLennan County
  • Milam County
    • The following are listed by their distance from Gober, with the one closest to Gober listed first.
    • Val Verde
      (19 miles [30.6 km] to the south)
      • Jump to our Gazetteer entry for Val Verde
      • Val Verde is located in Milam County
    • Buckholts
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Buckholts have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Buckholts
      • Buckholts is located in Milam County
      • Population from the 2020 Census: 518 people
      • Jump to TripAdvisor's Tourism page for Buckholts <1>
    • Burlington
      (22 miles [35.4 km] to the east)
    • Davilla
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Davilla have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Davilla
      • Davilla is located in Milam County
      • Jump to TripAdvisor's Tourism page for Davilla <1>
    • Silver City
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Silver City
      • Silver City is located in Milam County
    • Cameron
      (28 miles [45.1 km] to the southeast)
    • Tracy
      (29 miles [46.7 km] to the southeast)
      • Jump to our Gazetteer entry for Tracy
      • Tracy is located in Milam County
  • Williamson County
    • The following are listed by their distance from Gober, with the one closest to Gober listed first.
    • Schwertner
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Schwertner have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Schwertner
      • Schwertner is located in Williamson County
      • Jump to TripAdvisor's Tourism page for Schwertner <1>
    • Jarrell
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Jarrell have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jarrell
      • Jarrell is located in Williamson County
      • Population from the 2020 Census: 2,077 people
      • Jump to TripAdvisor's Tourism page for Jarrell <1>
    • Friendship ‑ Historic
      (26 miles [41.8 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Friendship. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Friendship
      • Friendship is located in Williamson County
    • Granger
      (26 miles [41.8 km] to the south)
    • Walburg
      (27 miles [43.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Walburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walburg
      • Walburg is located in Williamson County
      • Jump to TripAdvisor's Tourism page for Walburg <1>
    • Laneport
      (28 miles [45.1 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Laneport. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Laneport
      • Laneport is located in Williamson County
    • Hoxie
      (30 miles [48.3 km] to the south)
      • Jump to our Gazetteer entry for Hoxie
      • Hoxie is located in Williamson County
    • Florence
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Florence
      • Florence is located in Williamson County
      • Population from the 2020 Census: 1,304 people
      • Jump to TripAdvisor's Tourism page for Florence <1>

For an expanded list of the communities that are closest to Gober, see our County-by-County Page for Gober.

Cemeteries Near Gober ...

Below are cemeteries that are in the vicinity of Gober.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Gober covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Gober, with the one closest to Gober listed first.

  • Hillcrest Cemetery
    (2 miles [3.2 km] to the northeast)
    • Jump to our Gazetteer entry for the Hillcrest Cemetery
    • The Hillcrest Cemetery has also been known as:
    • Temple City Cemetery
  • Evergreen Cemetery
    (2 miles [3.2 km] to the northeast)
    • Jump to our Gazetteer entry for the Evergreen Cemetery
    • Note: The GPS coordinates that we are using for the Evergreen Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Lancaster Cemetery
    (3 miles [4.8 km] to the east)
    • Jump to our Gazetteer entry for the Lancaster Cemetery
    • Note: The GPS coordinates that we are using for the Lancaster Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Hill Cemetery
    (4 miles [6.4 km] to the southwest)
    • Jump to our Gazetteer entry for the Hill Cemetery
    • To give a relative sense of its location, the Hill Cemetery is located outside and to the east of Belton.
    • Jump to Find-A-Grave: FG ID #4232 <4>
  • Bellwood Memorial Park
    (4 miles [6.4 km] to the northwest)
    • Jump to our Gazetteer entry for the Bellwood Memorial Park
    • Note: The GPS coordinates that we are using for the Bellwood Memorial Park have been provided by the GNIS.<2> The coordinates still need to be verified.
  • North Belton Cemetery
    (5 miles [8 km] to the west)
    • Jump to our Gazetteer entry for the North Belton Cemetery
    • Note: The GPS coordinates that we are using for the North Belton Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • East Belton Cemetery
    (5 miles [8 km] to the southwest)
    • Jump to our Gazetteer entry for the East Belton Cemetery
    • Note: The GPS coordinates that we are using for the East Belton Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Taylors Valley Cemetery
    (5 miles [8 km] to the southwest)
    • Jump to our Gazetteer entry for the Taylors Valley Cemetery
    • Note: The GPS coordinates that we are using for the Taylors Valley Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Cedar Creek Cemetery
    (5 miles [8 km] to the north)
  • Greathouse Cemetery
    (5 miles [8 km] to the south)
  • Little Flock Cemetery
    (5 miles [8 km] to the east)
    • Jump to our Gazetteer entry for the Little Flock Cemetery
    • To give a relative sense of its location, the Little Flock Cemetery is a large cemetery that is located 3 miles [4.8 km]<5> to the northwest of Temple.
    • Jump to Find-A-Grave: FG ID #4866 <4>
  • Mt. Zion Cemetery
    (5 miles [8 km] to the northeast)
    • Jump to our Gazetteer entry for the Mt. Zion Cemetery
    • Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Continue List   (220 more) ...
    • South Belton Cemetery
      (6 miles [9.7 km] to the southwest)
      • Jump to our Gazetteer entry for the South Belton Cemetery
      • Note: The GPS coordinates that we are using for the South Belton Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Ferguson Cemetery
      (6 miles [9.7 km] to the south)
    • Pleasant View Cemetery
      (6 miles [9.7 km] to the northeast)
      • Jump to our Gazetteer entry for the Pleasant View Cemetery
      • Note: The GPS coordinates that we are using for the Pleasant View Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

While we didn't find Gober in the Atlas, the following 1895 communities would have been found near the current location of Gober.

These communities are listed based on their distance from Gober, with the one closest to Gober listed first.

  • Temple
    (Less than 2 miles to the east)
  • Belton
    (6 miles [9.7 km] to the southwest)
  • Heidenheimer
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Heidenheimer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Heidenheimer
    • Heidenheimer is located in Bell County
    • Jump to TripAdvisor's Tourism page for Heidenheimer <1>
  • Pendleton
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Pendleton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pendleton
    • Pendleton is located in Bell County
    • Jump to TripAdvisor's Tourism page for Pendleton <1>
  • Little River
    (7 miles [11.3 km] to the south)
  • Troy
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Troy have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Troy
    • Troy is located in Bell County
    • Population from the 2020 Census: 2,191 people
    • Jump to TripAdvisor's Tourism page for Troy <1>
  • Oenaville
    (8 miles [12.9 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Oenaville. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Oenaville
    • Oenaville is located in Bell County
  • Seaton
    (9 miles [14.5 km] to the east)
    • Note: The GPS coordinates that we are using for Seaton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Seaton
    • Seaton is located in Bell County
  • Moffat
    (9 miles [14.5 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Moffat. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Moffat
    • Moffat is located in Bell County
  • Belfalls
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Belfalls have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Belfalls
    • Belfalls is located in Bell County
  • Blevins
    (12 miles [19.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Blevins have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blevins
    • Blevins is located in Falls County
  • Cyclone
    (13 miles [20.9 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Cyclone. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Cyclone
    • Cyclone is located in Bell County
  • Continue List   (13 more) ...
    • Ocker
      (13 miles [20.9 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Ocker. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Ocker
      • Ocker is located in Bell County
    • Salado
      (14 miles [22.5 km] to the southwest)
    • Rogers
      (14 miles [22.5 km] to the southeast)

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Gober. See our List of 1890's Communities around Gober.

Newspapers Published in Gober ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 72 newspapers that have been published in the area around Gober.

Although we're unaware of any newspapers that were published in the immediate area of Gober, there are papers which were published within 28 miles [45.1 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Gober.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Gober:

Unfortunately, we don't know of a website for Gober. If you can help, please contact us through our Feedback Page.

The official website for Bell County: www.bellcountytx.com/

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Gober) to Point B.Our distance measurements begin at a specific point in Gober. The point we use is located at these GPS coordinates - Latitude: 31.0985, Longitude: -97.3689       In this case, the coordinates for Gober have been provided by the Geographic Names Information System (GNIS).
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Gober, please let us know so that we can improve our accuracy.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025