TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Eddy. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Eddy.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Eddy - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 43 communities listed:
- Axtell
(30 miles [48.3 km] to the northeast)
- Bellmead
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Bellmead have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bellmead
- Bellmead is located in McLennan County
- Population from the 2020 Census: 10,835 people
- Jump to TripAdvisor's Tourism page for Bellmead <2>
- Belton
(20 miles [32.2 km] to the southwest)
- Bruceville
(2 miles [3.2 km] to the northeast)
- Buckholts
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Buckholts have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckholts
- Buckholts is located in Milam County
- Population from the 2020 Census: 518 people
- Jump to TripAdvisor's Tourism page for Buckholts <2>
- Burlington
(24 miles [38.6 km] to the southeast)
- Chilton
(11 miles [17.7 km] to the east)
- China Spring
(24 miles [38.6 km] to the north)
- Crawford
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Crawford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crawford
- Crawford is located in McLennan County
- Population from the 2020 Census: 870 people
- Jump to TripAdvisor's Tourism page for Crawford <2>
- Elm Mott
(27 miles [43.5 km] to the north)
- Flat
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Flat have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flat
- Flat is located in Coryell County
- Jump to TripAdvisor's Tourism page for Flat <2>
- Gatesville
(30 miles [48.3 km] to the west)
- Harker Heights
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Harker Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harker Heights
- Harker Heights is located in Bell County
- Population from the 2020 Census: 33,071 people
- Jump to TripAdvisor's Tourism page for Harker Heights <2>
- Heidenheimer
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Heidenheimer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Heidenheimer
- Heidenheimer is located in Bell County
- Jump to TripAdvisor's Tourism page for Heidenheimer <2>
- Hewitt
(11 miles [17.7 km] to the north)
- Holland
(30 miles [48.3 km] to the south)
- Lacy - Lakeview
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Lacy - Lakeview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lacy - Lakeview
- Lacy - Lakeview is located in McLennan County
- Population from the 2020 Census: 6,803 people
- Jump to TripAdvisor's Tourism page for Lacy - Lakeview <2>
- Leon Junction
(20 miles [32.2 km] to the west)
- Little River
(22 miles [35.4 km] to the south)
- Lott
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Lott have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lott
- Lott is located in Falls County
- Population from the 2020 Census: 744 people
- Jump to TripAdvisor's Tourism page for Lott <2>
- Marlin
(21 miles [33.8 km] to the east)
- Mart
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Mart have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mart
- Mart is located in McLennan County
- Population from the 2020 Census: 1,983 people
- Jump to TripAdvisor's Tourism page for Mart <2>
- McGregor
(13 miles [20.9 km] to the northwest)
- Moody
(6 miles [9.7 km] to the west)
- Morgan's Point Resort
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Morgan's Point Resort have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morgan's Point Resort
- Morgan's Point Resort is located in Bell County
- Population from the 2020 Census: 4,785 people
- Jump to TripAdvisor's Tourism page for Morgan's Point Resort <2>
- Mound
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Mound have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mound
- Mound is located in Coryell County
- Jump to TripAdvisor's Tourism page for Mound <2>
- Nolanville
(25 miles [40.2 km] to the southwest)
- Oglesby
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Oglesby have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oglesby
- Oglesby is located in Coryell County
- Population from the 2020 Census: 464 people
- Jump to TripAdvisor's Tourism page for Oglesby <2>
- Otto
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Otto have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Otto
- Otto is located in Falls County
- Jump to TripAdvisor's Tourism page for Otto <2>
- Pendleton
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Pendleton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pendleton
- Pendleton is located in Bell County
- Jump to TripAdvisor's Tourism page for Pendleton <2>
- Perry
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Perry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Perry
- Perry is located in Falls County
- Jump to TripAdvisor's Tourism page for Perry <2>
- Reagan
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Reagan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reagan
- Reagan is located in Falls County
- Jump to TripAdvisor's Tourism page for Reagan <2>
- Riesel
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Riesel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riesel
- Riesel is located in McLennan County
- Population from the 2020 Census: 1,049 people
- Jump to TripAdvisor's Tourism page for Riesel <2>
- Robinson
(14 miles [22.5 km] to the northeast)
- Rogers
(25 miles [40.2 km] to the south)
- Rosebud
(22 miles [35.4 km] to the southeast)
- Salado
(28 miles [45.1 km] to the southwest)
- Satin
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Satin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Satin
- Satin is located in Falls County
- Jump to TripAdvisor's Tourism page for Satin <2>
- Temple
(14 miles [22.5 km] to the south)
- Troy
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Troy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Troy
- Troy is located in Bell County
- Population from the 2020 Census: 2,191 people
- Jump to TripAdvisor's Tourism page for Troy <2>
- Valley Mills
(28 miles [45.1 km] to the northwest)
- Waco
(18 miles [29 km] to the north)
- Jump to our Gazetteer entry for Waco
- Waco is located in McLennan County
- Population from the 2020 Census: 141,377 people
- Jump to TripAdvisor's Tourism page for Waco <2>
- Woodway
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Woodway have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodway
- Woodway is located in McLennan County
- Population from the 2020 Census: 9,077 people
- Jump to TripAdvisor's Tourism page for Woodway <2>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Eddy. If you can help, please contact us through our Feedback Page.
The official website for McLennan County: www.co.mclennan.tx.us/
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Eddy) to Point B.Our distance measurements begin at a specific point in Eddy. The point we use is located at these GPS coordinates - Latitude: 31.2959, Longitude: -97.2545 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |