|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Whiteley Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Whiteley Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Whiteley Cemetery (FG ID #7621). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Whiteley Cemetery. We've listed the following communities based on their distance, with the closest first.
- Georgetown
(5 miles [8 km] to the east)
- Leander
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Leander have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leander
- Leander is located in Williamson County
- Population from the 2020 Census: 70,519 people
- Jump to TripAdvisor's Tourism page for Leander <3>
- Serenada
(6 miles [9.7 km] to the northeast)
- Sun City
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Sun City have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sun City
- Sun City is located in Williamson County
- Brushy Creek
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Brushy Creek have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brushy Creek
- Brushy Creek is located in Williamson County
- Cedar Park
(8 miles [12.9 km] to the south)
- Round Rock
(8 miles [12.9 km] to the southeast)
- Old Round Rock ‑ Historic
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Old Round Rock have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Round Rock
- Old Round Rock is located in Williamson County
- Liberty Hill
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Liberty Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liberty Hill
- Liberty Hill is located in Williamson County
- Population from the 2020 Census: 3,549 people
- Jump to TripAdvisor's Tourism page for Liberty Hill <3>
- Weir
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Weir have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weir
- Weir is located in Williamson County
- Population from the 2020 Census: 549 people
- Jump to TripAdvisor's Tourism page for Weir <3>
- Nameless ‑ Historic
(11 miles [17.7 km] to the southwest)
- Anderson Mill
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Anderson Mill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anderson Mill
- Anderson Mill is located in Williamson County
- Jollyville
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Jollyville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jollyville
- Jollyville is located in Williamson County
- Andice
(12 miles [19.3 km] to the northwest)
- Jonestown
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Jonestown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonestown
- Jonestown is located in Travis County
- Population from the 2020 Census: 2,169 people
- Jump to TripAdvisor's Tourism page for Jonestown <3>
- Kings Village
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Kings Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kings Village
- Kings Village is located in Travis County
- Wells Branch
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Wells Branch have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wells Branch
- Wells Branch is located in Travis County
- Three Points
(13 miles [20.9 km] to the southeast)
- Windemere
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Windemere have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Windemere
- Windemere is located in Travis County
- Walburg
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Walburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walburg
- Walburg is located in Williamson County
- Jump to TripAdvisor's Tourism page for Walburg <3>
- Volente
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Volente have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Volente
- Volente is located in Travis County
- Population from the 2020 Census: 589 people
- Jump to TripAdvisor's Tourism page for Volente <3>
- Hutto
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Hutto have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hutto
- Hutto is located in Williamson County
- Population from the 2020 Census: 29,987 people
- Jump to TripAdvisor's Tourism page for Hutto <3>
- Pflugerville
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Pflugerville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pflugerville
- Pflugerville is located in Travis County
- Population from the 2020 Census: 66,826 people
- Jump to TripAdvisor's Tourism page for Pflugerville <3>
- Jarrell
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Jarrell have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jarrell
- Jarrell is located in Williamson County
- Population from the 2020 Census: 2,077 people
- Jump to TripAdvisor's Tourism page for Jarrell <3>
- Florence
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Florence
- Florence is located in Williamson County
- Population from the 2020 Census: 1,304 people
- Jump to TripAdvisor's Tourism page for Florence <3>
Off-the-Road Links ...
The official website for Williamson County: www.wilco.org/ The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Whiteley Cemetery. The point we use is located at these GPS coordinates - Latitude: 30.6239, Longitude: -97.7666 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|