RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Williamson County >> Andice >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Andice. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Andice.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Andice - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 38 communities listed:

  • Bartlett
    (24 miles [38.6 km] to the east)
    • Note: The GPS coordinates that we are using for Bartlett have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bartlett
    • Bartlett is located in Bell County
    • Population from the 2020 Census: 1,766 people
    • Jump to TripAdvisor's Tourism page for Bartlett <3>
  • Belton
    (29 miles [46.7 km] to the northeast)
  • Bertram
    (12 miles [19.3 km] to the west)
    • Note: The GPS coordinates that we are using for Bertram have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bertram
    • Bertram is located in Burnet County
    • Population from the 2020 Census: 1,520 people
    • Jump to TripAdvisor's Tourism page for Bertram <3>
  • Briarcliff
    (28 miles [45.1 km] to the southwest)
  • Briggs
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Briggs have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Briggs
    • Briggs is located in Burnet County
    • Jump to TripAdvisor's Tourism page for Briggs <3>
  • Buffalo Gap
    (28 miles [45.1 km] to the south)
  • Burnet
    (22 miles [35.4 km] to the west)
  • Cedar Park
    (18 miles [29 km] to the south)
    • Note: The GPS coordinates that we are using for Cedar Park have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Park
    • Cedar Park is located in Williamson County
    • Population from the 2020 Census: 81,040 people
    • Jump to TripAdvisor's Tourism page for Cedar Park <3>
  • Copperas Cove
    (23 miles [37 km] to the north)
    • Note: The GPS coordinates that we are using for Copperas Cove have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Copperas Cove
    • Copperas Cove is located in Bell County
    • Population from the 2020 Census: 33,498 people
    • Jump to TripAdvisor's Tourism page for Copperas Cove <3>
  • Florence
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Florence
    • Florence is located in Williamson County
    • Population from the 2020 Census: 1,304 people
    • Jump to TripAdvisor's Tourism page for Florence <3>
  • Fort Hood
    (24 miles [38.6 km] to the north)
  • Georgetown
    (14 miles [22.5 km] to the southeast)
  • Granger
    (24 miles [38.6 km] to the east)
  • Harker Heights
    (22 miles [35.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Harker Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harker Heights
    • Harker Heights is located in Bell County
    • Population from the 2020 Census: 33,071 people
    • Jump to TripAdvisor's Tourism page for Harker Heights <3>
  • Holland
    (27 miles [43.5 km] to the east)
  • Hutto
    (24 miles [38.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Hutto have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hutto
    • Hutto is located in Williamson County
    • Population from the 2020 Census: 29,987 people
    • Jump to TripAdvisor's Tourism page for Hutto <3>
  • Jarrell
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Jarrell have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jarrell
    • Jarrell is located in Williamson County
    • Population from the 2020 Census: 2,077 people
    • Jump to TripAdvisor's Tourism page for Jarrell <3>
  • Jonestown
    (21 miles [33.8 km] to the south)
    • Note: The GPS coordinates that we are using for Jonestown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jonestown
    • Jonestown is located in Travis County
    • Population from the 2020 Census: 2,169 people
    • Jump to TripAdvisor's Tourism page for Jonestown <3>
  • Kempner
    (21 miles [33.8 km] to the north)
    • Note: The GPS coordinates that we are using for Kempner have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kempner
    • Kempner is located in Lampasas County
    • Population from the 2020 Census: 1,160 people
    • Jump to TripAdvisor's Tourism page for Kempner <3>
  • Killeen
    (22 miles [35.4 km] to the north)
    • Note: The GPS coordinates that we are using for Killeen have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Killeen
    • Killeen is located in Bell County
    • Population from the 2020 Census: 153,991 people
    • Jump to TripAdvisor's Tourism page for Killeen <3>
  • Lago Vista
    (23 miles [37 km] to the south)
  • Lakeway
    (30 miles [48.3 km] to the south)
    • Note: The GPS coordinates that we are using for Lakeway have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lakeway
    • Lakeway is located in Travis County
    • Population from the 2020 Census: 16,216 people
    • Jump to TripAdvisor's Tourism page for Lakeway <3>
  • Lampasas
    (27 miles [43.5 km] to the northwest)
  • Leander
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Leander have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leander
    • Leander is located in Williamson County
    • Population from the 2020 Census: 70,519 people
    • Jump to TripAdvisor's Tourism page for Leander <3>
  • Liberty Hill
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Liberty Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Liberty Hill
    • Liberty Hill is located in Williamson County
    • Population from the 2020 Census: 3,549 people
    • Jump to TripAdvisor's Tourism page for Liberty Hill <3>
  • Marble Falls
    (28 miles [45.1 km] to the southwest)
  • Nolanville
    (25 miles [40.2 km] to the northeast)
  • Oatmeal
    (15 miles [24.1 km] to the southwest)
  • Pflugerville
    (26 miles [41.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Pflugerville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pflugerville
    • Pflugerville is located in Travis County
    • Population from the 2020 Census: 66,826 people
    • Jump to TripAdvisor's Tourism page for Pflugerville <3>
  • Point Venture
    (29 miles [46.7 km] to the south)
    • Note: The GPS coordinates that we are using for Point Venture have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Point Venture
    • Point Venture is located in Travis County
    • Population from the 2020 Census: 1,053 people
    • Point Venture has also been known as:
    • Point Venture village
    • Jump to TripAdvisor's Tourism page for Point Venture <3>
  • Round Rock
    (20 miles [32.2 km] to the southeast)
  • Salado
    (22 miles [35.4 km] to the northeast)
  • Schwertner
    (20 miles [32.2 km] to the east)
    • Note: The GPS coordinates that we are using for Schwertner have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Schwertner
    • Schwertner is located in Williamson County
    • Jump to TripAdvisor's Tourism page for Schwertner <3>
  • Spicewood
    (27 miles [43.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Spicewood have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spicewood
    • Spicewood is located in Burnet County
    • Jump to TripAdvisor's Tourism page for Spicewood <3>
  • Taylor
    (30 miles [48.3 km] to the southeast)
    • Jump to our Gazetteer entry for Taylor
    • Taylor is located in Williamson County
    • Population from the 2020 Census: 17,921 people
    • Jump to TripAdvisor's Tourism page for Taylor <3>
  • Volente
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Volente have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Volente
    • Volente is located in Travis County
    • Population from the 2020 Census: 589 people
    • Jump to TripAdvisor's Tourism page for Volente <3>
  • Walburg
    (16 miles [25.7 km] to the east)
    • Note: The GPS coordinates that we are using for Walburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Walburg
    • Walburg is located in Williamson County
    • Jump to TripAdvisor's Tourism page for Walburg <3>
  • Weir
    (17 miles [27.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Weir have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Weir
    • Weir is located in Williamson County
    • Population from the 2020 Census: 549 people
    • Jump to TripAdvisor's Tourism page for Weir <3>

Unfortunately, we don't know of an official website for Andice. If you can help, please contact us through our Feedback Page.

The official website for Williamson County: www.wilco.org/

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Andice) to Point B.Our distance measurements begin at a specific point in Andice. The point we use is located at these GPS coordinates - Latitude: 30.7824, Longitude: -97.8525    
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024